Grandstream GXW 42xx ATA Gateways Setup Provisioning 9/1/2020, SR

The following is the settings for the Grandstream GXW42xx Analog Gateways 9/2/2020, SR

=====================================

GXW4216 GXW4224 GXW4232 GXW4248

#############################################################################################

## Configuration template for GXW 42XX firmware version 1.0.7.8                           ##

#############################################################################################

################################################################################

#Maintenance-Network setting

################################################################################

#IP Address Mode. 0 - DHCP, 1 - Static IP, 2 - PPPoE

#Number: 0,1,2

#Mandatory 

#Reboot required 

P8=0

#Preferred DNS server

#Mandatory 

P92=0

P93=0

P94=0

P95=0

#Host name (Option 12). Max length allowed is 32 bytes.

#String: address 

P146=

#DHCP Domain

#String: address 

P147=

#Vendor Class ID (Option 60). Max length allowed is 32 bytes.

#String Max Length: 32 

P148=GXW4200

# Client Circuit ID (Option 82)

# String

P8560= 

# Remote Agent ID (Option 82)

# String

P8561= 

#PPPoE account ID

#P82=

#PPPoE password

#P83=

#PPPoE Service Name

#String Max Length: 64

#Reboot required 

P269=

#IP Address. Ignore if DHCP or PPPoE is used

#P9=192

#P10=168

#P11=0

#P12=160

#Subnet mask. Ignore if DHCP or PPPoE is used

#P13=255

#P14=255

#P15=0

#P16=0

#Gateway. Ignore if DHCP or PPPoE is used

#P17=0

#P18=0

#P19=0

#P20=0

#DNS server 1. Ignore if DHCP or PPPoE is used

#P21=0

#P22=0

#P23=0

#P24=0

#DNS server 2. Ignore if DHCP or PPPoE is used

#P25=0

#P26=0

#P27=0

#P28=

# Enable management interface. 0 - Disabled, 1 - Enabled

# Number: 0, 1

# Mandatory

P28161 = 0

# Management access. 0- Management interface only, 1 - Both on services and management interfaces

# Number： 0， 1

# Mandatory

P28162 = 0

# IP Address Mode for Management Interface. 0 - DHCP, 1 - Static IP

# Number: 0, 1

# Mandatory = 0

P22105 = 0

# Static IP Settings

# IP Address.

# ipaddress

P22106 = 192.168.100.100

# Subnet Mask. 

# ipaddress

P22107 = 255.255.255.0

# Gateway.

# ipaddress

P22108 = 192.168.100.1

# DNS Server 1

# ipaddress

P22109 = 0.0.0.0

# DNS Server 2

# ipaddress

P22110 = 0.0.0.0

#Enable LLDP. 0 - Disable, 1 - Enable

#Number: 0,1

#Mandatory                                      

P1684=1

#Layer 2 QoS 802.1Q/VLAN Tag for Service Interface

#Number

#Mandatory

P51=0

# Layer 2 QoS 802.1Q/VLAN Tag for Management Interface.

# Number

P22111 = 0

#Layer 2 QoS 802.1p Priority Value for SIP signaling

#Number: 0 to 7

#Mandatory

P5038=0

#Layer 2 QoS 802.1p Priority Value for RTP media

#Number: 0 to 7

#Mandatory

P5042=0

# Layer 2 QoS 802.1p Priority Value for Management Interface.

# Number

P22112 = 0

#Use STUN to detect network connectivity. 0 - No, 1 - Yes. 

#Number: 0,1

#Mandatory

P474=0

#STUN server

#String: serveraddress 

P76=

#Number of STUN Response Misses Allowed

#Number: 3 to 15

#Mandatory

P475=3

#Keep-alive interval (in seconds. default 20 seconds)

#Number: 10 to 160

#Mandatory

P84=20

#Black List for WAN Side Port.

P28115=

# Reply to ICMP. 0 -No, 1 -Yes

# Number: 0, 1

# Mandatory

P189 = 0

# Local DNS

# String

# Syntax: FQDN0/IP0; FQDN1/IP1; FQDN2/IP2; FQDN3/IP3

P8562= 

################################################################################

#Maintenance-Upgrade and Provisioning

################################################################################

#Lock keypad update.  0 - No, 1 - Yes.

#Number: 0,1

#Mandatory

P88="1"

#Use firmware pre/postfix to determine if f/w is required

#0=Always Check for New Firmware 

#1=Check New Firmware only when F/W pre/suffix changes 

#2=Always Skip the Firmware Check

#For Firmware only.

#Number: 0,1,2

#Mandatory 

P238="1"

#XML Config File Password

#String Max Length: 40

#Mandatory; between ascii values 33 and 126

P1359=

#HTTP/HTTPS User Name

#String Max Length: 40; between ascii values 33 and 126

P1360=

#HTTP/HTTPS Password

#String Max Length: 40; between ascii values 33 and 126

#Mandatory

P1361=

#Always send HTTP Basic Authentication Information. 0 - No, 1- Yes.

#Number: 0,1

#Mandatory

P20713=0

#Firmware Upgrade and Privisioning. 0 - TFTP Upgrade, 1 - HTTP Upgrade, 2 - HTTPS Upgrade.

#Number: 0 to 2

#Mandatory

P212="2"

#Firmware Server Path

#String: serveraddress 

P192="sonictel-prov-files.s3.us-east-2.amazonaws.com/Grandstream-GXW4248-1078"

#Config Server Path

#String: serveraddress 

P237="http://sipconfig.io/cfg"

#Firmware File Prefix

#String Max Length: 32; between ascii values 33 and 126

P232="1078"

#Firmware File Postfix

#String Max Length: 32; between ascii values 33 and 126

P233=

#Config File Prefix

#String Max Length: 32; between ascii values 33 and 126

P234=

#Config File Postfix

#String Max Length: 32; between ascii values 33 and 126

P235=

#Allow DHCP Option 66 to override server. 0 - No, 1 - Yes. Default is Yes.

#When set to Yes(1), it will override the configured provision path and method.

#Number: 0,1

#Mandatory

#Reboot required 

P145=1

#Automatic Upgrade. 0 - No, 1 - Check every () minutes, 2 - Check daily, 3 - Check weekly,. Default is No.

#Number: 0,1,2,3

#Mandatory

P22296=0

#Automatic Upgrade. Check for new firmware/config file every () minutes, unit is in minute, minimum 60 minutes, default is 7 days. P194=3

#Number: 60 to 5256000

#Mandatory 

P193=10080

# Randomized Automatic Upgrade. 0 - No, 1 - Yes

# Number: 0, 1

# Mandatory

P8458 = 0

# Hour of the Day - End(0 -23). 

# Minimum: 0

# Maximum: 23

# Mandatory

P8459 = 22

#Automatic Upgrade. Daily at hour(0-23). P194=1

#Number: 0 to 23

#Mandatory

P285=1

#Automatic Upgrade. Weekly on day (0-6). P194=2

#Number: 0 to 6

#Mandatory 

P286=1

#Authenticate Conf File

#Number: 0 No, 1 Yes  (cfg file would be authenticated before acceptance if set to Yes) 

#Mandatory

P240=0

#Firmware Key (AES 128, in Hexadecimal Representation)

#String Max Length: 32 0-9,A-Z,a-z

P242=

################################################################################

#Maintenance-Web/Telnet Access

################################################################################

#HTTP Web Port. Default HTTP is 80.

#Number: 1 to 65535

#Mandatory 

#Reboot required 

P901=80

# HTTPS Web Port. Default HTTPS Port is 443

# Number: 1 to 65535

# Mandatory

P27010=443

# Web Access Mode. 0 - HTTPS, 1 - HTTP

# Number: 0, 1

# Mandatory

P1650=1

#Disable SSH. 0 - No, 1 - Yes

#Number: 0,1

#Mandatory 

P276="1"

# Lockout time interval. minimum - 1 minute, maximum - 15 minutes

# Mandatory

P1683=15

# Disable User Level Web Access. 0 - No, 1 - Yes

# Number: 0, 1

# Mandatory

P28158 = 0

# Disable Viewer Level Web Access. 0 - No, 1 - Yes

# Number: 0, 1

# Mandatory

P28159 = 0

#User Password

#P196=123

#Admin password

#String Max Length: 30; between ascii values 33 and 126

#Mandatory

P2="649"

# White list for WAN side

# String: ip address

P20701=

# Black list for WAN side

# String: ip address

P20702=

################################################################################

#Maintenance-TR-069

################################################################################

#Enable TR-069. 0 - No, 1 - Yes. Default is 0.

#Number: 0, 1

#Mandatory -->

P1409=0

#ACS URL

#P4503=

#ACS Username

#String Max Length: 64

P4504=

#ACS Password

#String Max Length: 64

#Mandatory 

P4505=

#Periodic Inform Enable 0 - No, 1 - Yes (default is No)

#Number: 0,1

#Mandatory

P4506=  0

#Periodic Inform Interval (default is 300)

#String Max Length: 5 

P4507= 300

#Conncetion Request Username

#String Max Length: 64

P4511=

#Connection Request Password

#String Max Length: 64

#Mandatory 

P4512=

# Connection Request Port. Default is 7547

# Number: 0 - 65535

# Mandatory

P4518 = 7547

################################################################################

#Maintenance-SNMP

################################################################################

#SNMP enable/disable. 0 - No, 1 - Yes (default is No)

#Number: 0,1

#Mandatory

P21896= 0

#Trap Community

P21900=

#IP Address

#IP format

P21897=

#Port (default 162)

#Number: 1 to 65535

#Mandatory

P21898= 162

#Version. 1 - Version 1, 2 - Version 2c (default 2)

#Number: 1 or 2

#Mandatory

P21899= 2

#Trap interval (default 5)

#Mandatory

P21901= 5

################################################################################

#Maintenance-Security Settings

################################################################################

#SIP TLS Certificate

#String

#P280=

#SIP TLS Private Key

#String

#P279=

#SIP TLS Private Key Password

#String

#Max Length: 64 characters

P281= s1pphone

# Custom Certificate

# String

P8472 = 

# Validate Server Certificates. 0 - No, 1 - Yes

# Number: 0, 1

# Mandatory

P8463 = 0

# Disable Weak TLS Cipher Suites. 0 - Enable Weak TLS Ciphers Suites, 1 - Disable Symmetric Encryption RC4/DES/3DES, 2 - Disable Symmetric Encryption SEED, 3 - Disable All Of The Above Weak Symmetric Encryption, 4 - Disable Symmetric Authentication MD5, 5 - Disable All Of The Above Weak Symmetric Authentication, 6 - Disable Protocol Version SSLv2/SSLv3, 7 - Disable All Of The Above Weak Protocol Version, 8 - Disable All Of The Above Weak TLS Ciphers Suites

# Number: 0 - 8

# Mandatory

P8536 = 0

# Minumum TLS version. 99 - Unlimited, 10 - TLS 1.0, 11 - TLS 1.1, 12 - TLS 1.2

# Number: 99, 10, 11, 12

# Mandatory

P22293 = 99 

# Maximum TLS version. 99 - Unlimited, 10 - TLS 1.0, 11 - TLS 1.1, 12 - TLS 1.2

# Number: 99, 10, 11, 12

# Mandatory

P22294 = 99

# Trusted CA certificate A.

# String

P2386= 

# Trusted CA certificate B.

# String

P2486= 

# Trusted CA certificate C.

# String

P2586= 

# Trusted CA certificate D.

# String

P2686= 

# Load CA Certificates. 0 - Built-in trusted certificates, 1 - Custom trusted certificates, 2 - All trusted certificates

# Number: 0, 1 ,2

# Mandatory

P8502 = 0

#Primary RADIUS Server

#P4550=

#Primary RADIUS Auth Port (default 1812). 

#Number: 1 to 65535

#Mandatory

P4551=1812

#Primary RADIUS Acct Port (default 1813).

#Number: 1 to 65535

#Mandatory

P4552=1813

#Primary RADIUS Server Secret

#String Max Length: 32

#Mandatory 

P4553=

#Secondary RADIUS Server

#P4554=

#Secondary RADIUS Auth Port (default 1812).

#Number: 1 to 65535

#Mandatory 

P4555=1812

#Secondary RADIUS Acct Port (default 1813).

#Number: 1 to 65535 

#Mandatory

P4556=1813

#Secondary RADIUS Server Secret

#String Max Length: 32

#Mandatory 

P4557=

#RADIUS Timeout (default 2).

#Number: 1 to 65535

#Mandatory 

P4558=2

#RADIUS Retry (default 3).

#Number: 1 to 65535

#Mandatory

P4559=3

################################################################################

#Maintenance-Date and Time

################################################################################

#NTP Server

#String: serveraddress 

P30=us.pool.ntp.org

#NTP Update Interval in minutes(5-1440)(Default is set to 60 minutes)

#Number: 5 to 1440

#Mandatory 

P5005=60

#Allow DHCP Option 42 to NTP Server. (If DHCP Option 42 is enabled, the NTP server can be changed.)

#Number: 0, 1

#Mandatory

P144=1

#Time Zone. Offset in minutes to GMT

#<value="TZA+12"> GMT-12:00 </option>

#<value="TZB+11"> GMT-11:00 </option>

#<value="TZC+10"> GMT-10:00 </option>

#<value="TZD+9"> GMT-09:00 </option>

#<value="TZE+8"> GMT-08:00 </option>

#<value="TZF+7"> GMT-07:00 </option>

#<value="TZG+6"> GMT-06:00 </option>

#<value="TZH+5"> GMT-05:00 </option>

#<value="TZf+4:30"> GMT-04:30 </option>

#<value="TZI+4"> GMT-04:00 </option>

#<value="TZJ+3:30"> GMT-03:30 </option>

#<value="TZK+3"> GMT-03:00 </option>

#<value="TZL+2"> GMT-02:00 </option>

#<value="TZM+1"> GMT-01:00 </option>

#<value="TZN+0"> GMT </option>

#<value="TZO-1"> GMT+01:00 </option>

#<value="TZP-2"> GMT+02:00 </option>

#<value="TZQ-3"> GMT+03:00 </option>

#<value="TZR-4"> GMT+04:00 </option>

#<value="TZS-5"> GMT+05:00 </option>

#<value="TZT-5:30"> GMT+05:30 </option>

#<value="TZU-5:45"> GMT+05:45 </option>

#<value="TZV-6"> GMT+06:00 </option>

#<value="TZW-6:30"> GMT+06:30 </option>

#<value="TZX-7"> GMT+07:00 </option>

#<value="TZY-8"> GMT+08:00 </option>

#<value="TZZ-9"> GMT+09:00 </option>

#<value="TZa-9:30"> GMT+09:30 </option>

#<value="TZb-10"> GMT+10:00 </option>

#<value="TZc-11"> GMT+11:00 </option>

#<value="TZd-12"> GMT+12:00 </option>

#<value="TZe-13"> GMT+13:00 </option>

#<value="customize"> Self-Defined Time Zone </option>

#Mandatory Category: string Max Length: 9 Range0: Min=a Max=z Range1: Min=A Max=Z Range2: Min=+ Max=:

P64="TZH+5"> GMT-05:00"

#Self-Defined Time Zone

#String Max Length: 32 a-z, A-Z, +,:

P246=MTZ+6MDT+5,M3.2.0,M11.1.0

#Allow DHCP Option 2 to override time zone (If DHCP Option 2 is enabled, the timezone can be offset.)

#Number: 0, 1

#Mandatory

P143=1

################################################################################

#Maintenance-Syslog

################################################################################

# Syslog Protocol. 0 - UDP, 1 - SSL/TLS

# Number: 0, 1

# Mandatory

P8402=0

#Syslog Server (name of the server, max length is 64 charactors)

#String: serveraddress 

P207=

#Syslog Level (Default setting is NONE)

#0 - NONE, 1 - DEBUG, 2 - INFO, 3 - WARNING, 4 - ERROR

#Number: 0,1,2,3,4

#Mandatory

P208=0

#Send SIP Log (0 - No, 1 - Yes, Default set to No)

#Number: 0,1 

P1387=0

# SIP Log Option. 0 - Keep, 1 - Override

# Number: 0, 1

# Mandatory 

P8535=0

# Save Syslog. 0 - No, 1 - Yes. Default is No

# Number: 0, 1

# Mandatory

P28100=0

################################################################################

#Call Record

################################################################################

# CDR record Option. 0 - Keep, 1 - Override

# Number: 0, 1

# Mandatory 

P8534=0

################################################################################

#Advanced Settings-Ring Tones

################################################################################

#System Ring Cadence 

#Syntax: c=on1/ off1[- on2/ off2[- on3/ off3]](Cadence on and off are in 10 ms units)

#String Max Length: 256

P4040=c=2000/4000;

#Call Progress Tones

#Syntax: f1=val, f2=val[, c=on1/ off1[- on2/ off2[- on3/ off3]]](Frequencies are in Hz and cadence on and off are in 10 ms units) 

#Dial Tone

#String Max Length: 256 

P4000=f1=350@-13,f2=440@-13,c=0/0;

#Ringback Tone

#String Max Length: 256 

P4001=f1=440@-19,f2=480@-19,c=2000/4000;

#Busy Tone

#String Max Length: 256 

P4002=f1=480@-24,f2=620@-24,c=500/500;

#Reorder Tone

#String Max Length: 256 

P4003=f1=480@-24,f2=620@-24,c=250/250;

#Confirmation Tone

#String Max Length: 256 

P4004=f1=350@-11,f2=440@-11,c=100/100-100/100-100/100;

#Call Waiting tone

#String Max Length: 256 

P4005=f1=440@-13,c=300/10000-300/10000-0/0;

#Prompt Tone

#String Max Length: 256 

P4041=f1=350@-13,f2=440@-13,c=0/0;

# Conference Party Hangup Tone. 

# String Max Length: 256

# Mandatory

P28133=f1=425@-15,c=600/600;

################################################################################

#Advanced Settings-FXO Failover

################################################################################

#Failover to FXO Gateway. 0 - Disable, 1 - Enable

#Number: 0,1

#Mandatory

P4205=0

#FXO Gateway. URI or IP address.

#String: serveraddress 

P4206=

################################################################################

#Advanced Settings-System Features

################################################################################

#Disable Direct IP Call. 0 - No, 1 - Yes.

#Number: 0,1

#Mandatory

P277="1"

# Inter-port Calling. 0 - Disabled, 1 - Enabled

# Number: 0, 1

# Mandatory

P28146=0

#Disable SIP NOTIFY Authentication

#Number: 0 No, 1 Yes  (Device will not challenge NOTIFY with 401 when set to Yes) 

#Mandatory

#P4428=0

#Disable voice prompt. 0 - No, 1 - Yes.

#Number: 0,1

#Mandatory

P253=0

#IVR Language. en - English, zh - Chinese, es- Spanish

#text: en, zh, es

#Mandatory 

P342=en

#LCD Display Language. en - English, zh - Chinese, fr - French, es - Spanish

#String

#Mandatory 

P1362=en

#Prompt Dial Tone Code(Key pattern to get Prompt Tone. Maximum 20 digits. No default.)

#String Max Length: 20 

P4042=

#Country Specific Deployment. 0 - None(default), zh - China, zh1 - China Custom #1, zh2 - China Custom #2

#String

#Mandatory

P400=0

#Automatic Reboot. 0 - No, 1 - Yes, reboot every day, 2 - Yes, reboot every week

#Number: 0,1,2

#Mandatory

P21929=0

#Hour of the Day(0-23) Defines the hour of the day to reboot the gateway. Will valid after configured Automatic Reboot to yes.

#Number: 0-23

#Mandatory

P21930=1

#Day of the Week (0-6) Defines the day of the week to reboot the gateway.

#Number: 0-6

#Mandatory

P21931=1

# LED Pattern. 0 - Pattern A, 1 - Pattern B, 2 - Pattern C

# Number: 0, 1, 2

# Mandatory

P4049=0

################################################################################

#Profile 1-General Settings

################################################################################

#Profile Active.  0 - no, 1 - yes

#Number: 0,1

#Mandatory

P271="1"

#Primary SIP Server

#String: serveraddress 

P47="krc.21757.service"

#Failover SIP Server

#String: serveraddress 

P967=

#Prefer Primary SIP Server. 0 - No, 1 - Yes.

#Number: 0,1

#Mandatory

P4567=0

#Primary Outbound Proxy

#String: serveraddress 

P48="21757.hpbx.outboundproxy.com"

# Backup Outbound Proxy.

# String: serveraddress

P2333=

# Prefer Primary Outbound Proxy. 0 - No, 1 - Yes

# Number: 0, 1

# Mandatory

P28096=0

################################################################################

#Profile 1-Network Settings

################################################################################

#Layer 3 QoS SIP Diff-Serv (default 24)

#Number

#Mandatory

P5046=24

#Layer 3 QoS RTP Diff-Serv (default 46)

#Number

#Mandatory

P5050=46

#DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV, 3 - Use Configured IP .

#Number: 0,1,2,3

#Mandatory 

P103=0

#Primary IP

#IP address

P2308=

#Backup IP1

#IP address

P2309=

#Backup IP2

#IP address

P2310=

#NAT Traversal (STUN). 0 - No, 2 - No but send keep-alive, 1 - Yes

#Number: 0,1,2

#Mandatory

P52=0

#Use NAT IP.  This will enable our SIP client to use this IP in the SIP message. Example 64.3.153.50.

#String: ipaddress 

P101=

#Proxy-Require (A SIP extension to enable firewall penetration)

#String: ipaddress 

P197=

################################################################################

#Profile 1-SIP Settings

################################################################################

#Basic Settings#################################################################

#SIP Transport. 0 - UDP, 1 - TCP, 2 - TLS

#Number: 0,1,2

#Mandatory

P130=0

#SIP Registration. 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P31=1

#Unregister On Reboot. 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P81=0

#Add Auth Header On Initial REGISTER

#Number: 0,1

#Mandatory 

P2359=0

#Outgoing call without Registration. 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P109=1

#Register Expiration (in minutes. default 1 hour, max 45 days)

#Number: 1 to 64800

#Mandatory in NDP

P32="1"

#SIP Registration Failure Retry Wait Time (in seconds. Between 1-3600, default is 30)

#Number: 1 to 3600

#Mandatory 

P138=30

# SIP Registration Failure Retry Wait Time upon 403 Forbidden. 0 second means stop retry registration. Default is 1200 sec.

# Number 0 to 3600

# Mandatory

P26002=1200

#Reregister before Expiration

#Number

#Mandatory

P2330=0

# Enable SIP OPTIONS/NOTIFY Keep Alive. 0 - No, 1 - OPTIONS, 2 - NOTIFY

# Number: 0, 1, 2

# Mandatory

P2397 = 0 

# Enable SIP OPTIONS/NOTIFY Keep Alive Interval. In seconds. The default value is 30 seconds.

# Number: 1 - 64800

# Mandatory

P2398 = 30

# SIP OPTIONS/NOTIFY Keep Alive Max Lost. In packages. The default value is 3 packages.

# Number: 3 - 10

# Mandatory

P2399 = 3

#Local SIP port (default 5060)

#Number: 1 to 65535

#Mandatory 

P40=5060

#Use Random SIP Port 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P78=0

#Local RTP port (1024-65535, default 50000)

#Number: 1024 to 65535

#Mandatory

P39 = 50000

#SIP T1 Timeout. RFC 3261 T1 value.

#50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default 100.

#Number: 50,100,200,400,800

#Mandatory

P209=50

#SIP T2 Timeout. RFC 3261 T2 value.

#200 - 2 sec, 400 - 4 sec, 800 - 8 sec, 1600 - 16 sec, 3200 - 32 sec. Default 400.

#Number: 1600,3200,200,400,800

#Mandatory 

P250=400

#Remove OBP from Route Header. 0 - no, 1 - yes

#NUmber: 0,1

#Mandatory

P4562=0

#Support SIP Instance ID. 0 - no, 1 - yes

#Number: 0,1

#Mandatory

P288=1

# Hold Target Before Refer 0 - No, 1 - Yes

# Number: 0, 1

# Mandatory

P26003=1

#Refer-To Use Target Contact. 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P135=

#SUBSCRIBE for MWI. 0 - No, 1 - Yes.

#Number: 0,1

#Mandatory

P99=0

#Enable 100rel. 0 - No, 1 - Yes

#Number: 0 to 1

#Mandatory 

P272=0

#Tel URI. 0 - Disabled, 1 - User=Phone, 2 - Enabled

#Number: 0,1,2

#Mandatory 

P63=0

#Use Request Routing ID in SIP Headers, 0 - No, 1 - Yes

#Number: 0,1

#Mandatory 

P4891=0

#Do Not Escape '#' as %23 in SIP URI. 0 - No, 1 - Yes

#Number: 0, 1

#Mandatory

P1406= 0

#Disable Multiple m Line in SDP. 0 - No, 1 - Yes

P137= 0

#Use Privacy Header. 0 - Default, 1 - No, 2 - Yes

#Number: 0, 1, 2

#Mandatory

P2338= 0

#Use P-Preferred-Identity Header. 0 - Default, 1 - No, 2 - Yes

#Number: 0, 1, 2

#Mandatory

P2339= 0

#SIP REGISTER Contact Header Uses. 0 - LAN Address, 1 - WAN Address

#Number: 0, 1

#Mandatory

#P4437=0

# Caller ID Display. 0 - Auto, 1 - Disable, 2 - From Header

# Number: 0, 1, 2

# Mandatory

P2324=0

# Use Actual Ephemeral Port in Contact with TCP/TLS. 0 - No, 1 - Yes

# Number: 0, 1

# Mandatory

P2331 = 0

#Session Timer################################################################################

#Session Expiration (in seconds. default 180 seconds. Allowed value: 90-65535)

#Number: 90 to 64800

#Mandatory 

P260=180

#Minimum SE (in seconds. default 90 seconds, must be lower than or equal to P260)

#Number 90 to 64800

#Mandatory 

P261=90

#Caller Request Timer (Request for timer when calling) 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P262=0

#Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P263=0

#Force Timer (Still use timer when remote party does not support timer) 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P264=0

#UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS

#Number: 0,1,2

#Mandatory 

P266=0

#UAS Specify Refresher. 1 - UAC, 2 - UAS

#Number: 1,2

#Mandatory 

P267=1

#Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE) 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P265=0

#Security Settings################################################################################

#Validate Incoming Messages. 0 - No, 1 - Yes

#Number: 0,1

#Mandatory 

P4340=0

#Check SIP User ID for Incoming INVITE. 0 - No, 1 - Yes (no direct IP calling if Yes)

#Number: 0,1

#Mandatory 

P258=0 

#Allow Incoming SIP Messages from SIP Proxy Only

#Number: 0,1

#Mandatory 

P243="1"

#Authenticate incoming INVITE 

#Number: 0,1

P2346=0

# Authenticate server certificate domain. 0 - No, 1 - Yes, default is 0

# Number: 0, 1

# Mandatory

P2311=0

# Authenticate server certificate chain. 0 - No, 1 - Yes, default is 0

# Number: 0, 1

# Mandatory

P2367=0

################################################################################

#Profile 1-Fax Settings

################################################################################

#FAX Mode. 0 - T.38 (Auto Detect), 1 - Pass Through

#Number: 0,1

#Mandatory 

P228=0

#Fax Tone Detection Mode. 1 - Caller, 0 - Callee, 2 - Caller or Callee

#Number: 0,1,2

#Mandatory 

P894=0

#Send Re-INVITE After Fax. 0 - No, 1 - Yes

#Number: 0,1

#Mandatory 

P4367=0

#Send Re-INVITE After Fax Tone. 0 - No, 1 - Yes

#Number: 0,1

#Mandatory 

P4416=1

#Enable Silence Detection for Fax Disconnect. 0 - No, 1 - Yes

#Number: 0 to 1

#Mandatory 

P4406=1

################################################################################

#Profile 1-Audio Settings

################################################################################

#Preferred DTMF Method 1 

#100 - In-audio, 101 - RFC2833, 102 - SIP INFO

#Priority 1

#Number: 100 to 102

#Mandatory

P850=100

#Preferred DTMF Method 2

#Number: 100 to 102

#Mandatory 

P851=100

#Preferred DTMF Method 3

#Number: 100 to 102

#Mandatory 

P852=100

#DTMF-RELAY Tag Respect SIP INFO. 0 - No, 1 - Yes (If set to "NO", the dtmf-relay tag in Accept Header is always added in outbound INVITE. If set to "YES", it depends on if SIP INFO is chosen in Prefered DTMF Method.)

#Number: 0, 1

#Mandatory

P28088=0

#Disable DTMF Negotiation. 0 - no, 1 - yes 

#Number: 0,1

#Mandatory

P4825=0

#Enable Fast RFC2833. 0 - No, 1 - Yes

#Number: 0,1

#Mandatory

P21917=0

#DTMF Payload Type

#Number: 96 to 127

P79=101

#Preferred Vocoder

#0 - PCMU, 8 - PCMA, 4 - G.723, 18 - G.729, 2 - G.726-32, 100 - AAL2-G.726-16,

#102 - AAL2-G.726-24, 104 - AAL2-G726-32, 103 - AAL2-G.726-40, 98 - iLBC, 9 - G.722(wide band)

#Choice 1. 

#Mandatory

P57=0

#Choice 2. 

#Mandatory

P58=8

#Choice 3. 

#Mandatory

P59=4

#Choice 4. 

#Mandatory 

P60=18

#Choice 5. 

#Mandatory

P61=2

#Choice 6. 

#Mandatory 

P62=98

#Choice 7. 

#Mandatory

P46=104

#Choice 8. 

#Mandatory

P98=100

#Voice Frame per TX. (Default 2, from 1 to 4 for G711/G726/G729)

#Number: 1 to 4

P37=2

#G723 rate. 0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate

#Number: 0,1

#Mandatory 

P49=0

#G726-32 Packing Mode. 0 - ITU, 1 - IETF

#Number: 0,1

#Mandatory 

P2323=0

#iLBC Frame Size. 0 - 20ms(default), 1 - 30ms.

#Number: 0,1

#Mandatory 

P97=0

#iLBC payload type. Between 96 and 127, default is 97.

#Number: 96 to 127

#Mandatory 

P96=97

#AAL2-G.726-16 Payload type. (between 96 and 127, default is 100)

#Number: 96 to 127

#Mandatory 

P125=100

#AAL2-G.726-24 Payload type. (between 96 and 127, default is 99)

#Number: 96 to 127

#Mandatory 

P126=99

#AAL2-G726-32 payload type. (between 96 and 127, default is 104)

#Number: 96 to 127

#Mandatory 

P127=104

#AAL2-G.726-40 Payload type. (between 96 and 127, default is 103)

#Number: 96 to 127

#Mandatory 

P128=103

#Use First Matching Vocoder in 200OK SDP. 0 - No, 1 - Yes

#Number: 0,1

#Mandatory 

P4363=0

#SRTP Mode

#0=Disabled

#1=Enabled but not forced

#2=Enabled and forced

#Number: 0,1,2

#Mandatory

P183=0

# Crypto Life Time

# 0 = Disabled

# 1 = Enabled

# Number: 0, 1

# Mandatory

P2363=1

#Silence Suppression (VAD). 0 - No, 1 - Yes

#Number: 0,1

#Mandatory 

P50=0

#Jitter Buffer Type. 0 - Fixed, 1 - Adaptive

#Number: 0,1

#Mandatory

P133= 1

#Jitter Buffer Length. 0 - Low, 1 - Medium, 2 - High

#Number: 0,1,2

#Mandatory

P132=1

# RTCP. 0 - Disable, 1 - Enable

# Number: 0, 1

# Mandatory

P2392=1

#SLIC Setting

#0 - USA, 1 - AUSTRIA, 2 - BELGIUM, 3 - FINELAND, 4 - FRANCE, 5 - GERMANY

#6 - GREECE, 7 -ITALY, 8 - JAPAN, 9 - NORWAY, 10 - SPAIN, 11 - SWEDEN,

#12 - UK, 13 - AUSTRALIA/NEW ZEALAND, 14 - CHINA

#Number: 0 to 14

#Mandatory 

P854=0

# Ringing Frequency. 0 - Default, 1 - 20Hz, 2 - 25Hz

# Number: 0, 1, 2

# Mandatory

P4429 = 0

#Caller ID Scheme

#0  - Bellcore/Telcordia

#1  - ETSI-FSK during ringing

#2  - ETSI-FSK prior to ringing with DTAS

#3  - ETSI-FSK prior to ringing with LR

#4  - ETSI-FSK prior to ringing with RP

#5  - ETSI-DTMF during ringing

#6  - ETSI-DTMF prior to ringing with DTAS

#7  - ETSI-DTMF prior to ringing with LR

#8  - ETSI-DTMF prior to ringing with RP

#9  - SIN 227 - BT

#10 - NTT Japan

#Number: 0 to 10

#Mandatory 

P853=0

#Polarity Reversal.  0 - No, 1 - Yes

#Number: 0,1

#Mandatory 

P205=0

#Loop Current Disconnect. 0 - No, 1 - Yes

#Number: 0,1

#Mandatory 

P892="1"

# Play busy/reorder tone before Loop Current Disconnect

# 0 = Disabled

# 1 = Enabled

# Number: 0, 1

# Mandatory

P21925=0

#Loop Current Disconnect Duration. In 100 - 10000 milliseconds range, default is 200.

#Number: 100 to 10000

#Mandatory 

P856="500"

#Enable Hook Flash

#Number: 0, 1

#Mandatory

P4424=1

#Hook Flash Timing. In 40-2000 milliseconds range

#minimum

#Number: 40 to 2000

#Mandatory

P251=300

#maximum

#Number: 40 to 2000

#Mandatory 

P252=1100

#On Hook Timing. (In 40-2000 milliseconds range, default is 400)

#Number: 40 to 2000

#Mandatory 

P833=400

#Gain:

#TX 

#<value=1> +6dB

#<value=2> +4dB

#<value=3> +2dB

#<value=0> 0dB

#<value=4> -2dB

#<value=5> -4dB

#<value=6> -6dB

#Number: 0 to 6

#Mandatory 

P247=0 

#RX 

#<value=1> +6dB

#<value=2> +4dB

#<value=3> +2dB

#<value=0> 0dB

#<value=4> -2dB

#<value=5> -4dB

#<value=6> -6dB

#Number: 0 to 6

#Mandatory 

P249=0

#Disable Line Echo Canceller (LEC).  0 - No, 1 - Yes

#Number: 0,1

#Mandatory

P824=0

################################################################################

#Profile 1-Call Settings

################################################################################

#Early Dial. 0 - No, 1 - Yes (use "Yes" only if proxy supports 484 response). 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P29=0

#Dial Plan Prefix.(this prefix string is added to each dialed number)

#String Max Length: 32

P66=

#Dial Plan 

#String Max Length: 1024

P4200={ x+ | *x+ }

#Use #as Dial Key (if set to Yes, "#" will function as the "(Re-)Dial" key). 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P72=1

# Disable # as Redial Key. 0 - No, 1 - Yes

# Number: 0, 1

# Mandatory

P28147 = 0

#No Key Entry Timeout. Default - 4 seconds.

#Number: 1 to 15

#Mandatory

P85=4

#Offhook Auto-Dial Delay (default is 0)

#String: 0 to 60

P4045=0

# Allow Auto-Dial Config Per Port. 0 - Disable, 1 - Enable

# Number: 0, 1

# Mandatory

P28129=0

#Disable Call Waiting. 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P91=0

# RFC2543 Hold. 0 - No, 1 - Yes

# Number: 0, 1

# Mandatory

P26062=1

#Disable Call Waiting Caller ID. 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P714=0

#Disable Call Waiting Tone. 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P186=0

#Disable Connected Line ID. 0 = Disabled, 1 = Enabled (If yes, Connected Line ID will not be displayed even received.)

#Number: 0, 1

#Mandatory

P20525=0

#Disable Receiver Offhook Tone. 0 - No, 1 - Yes.

#Number: 0,1

#Mandatory 

P4793=0

#Disable Reminder Ring for On-Hold Call:

#Number: 0,1

#Mandatory 

P4360=0

# Disable Reminder Ring for DND. 0 - No, 1 - Yes

# Number: 0, 1

# Mandatory

P29072 = 0

# Disable Voicemail Reminder Tone. 0 - No, 1 - Yes

# Number: 0, 1

# Mandatory

P28151 = 0

#Disable Visual MWI. 0 - No, 1 - Yes

#Number: 0,1

#Mandatory 

P855=0

#Visual MWI type: 1 - FSK, 2 - Neon

#Number: 1,2

#Mandatory

P4371=1

#Transfer on Conference Hangup. 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P4560=0

#Send Hook Flash Event. 0 - no, 1 - yes 

#Number: 0 to 1

#Mandatory 

P74=0

#Flash Digit Control. 0 - No, 1 - Yes(Set Yes will overrides the default settings for call control when both channels are in use.) 

#Number: 0, 1

#Mandatory

P28080=0

# Callee Flash to 3WC. 0 - No, 1 - Yes

# Number: 0, 1

# Mandatory

P28169 = 0

#Ring Timeout. (0, 10-300, default is 60 seconds. When set to 0, the Ring Timeout feature is disabled)

#Number: 10 to 300

#Mandatory 

P185=60

#Delayed Call Forward Wait Time. Allowed range 1-120, in seconds. Default 20 seconds.

#Number: 1 to 120

#Mandatory

P139=20

#Send Anonymous. 0 - no, 1 - yes (caller ID will be blocked if set to Yes).

#Number: 0 to 1

#Mandatory 

P65=0

#Anonymous Call Rejection. 0 - No, 1 - Yes.

#Number: 0 to 1

#Mandatory 

P129=0

# Replace Beginning '+' with 00 in Caller ID. 0 - No, 1 - Yes

# Number: 0, 1

# Mandatory

P29073=0

#Hunting Group Type. 0 - Circular, 1 - Linear

#Number: 0,1

#Mandatory

P4395=0

#Hunting Group Ring Timeout. (5-300, default is 20 seconds)

#Number: 5 to 300

#Mandatory 

P4330=20

#Special Feature

#100 - Standard, 102 - BroadSoft, 108 - CBCOM, 109 - RNK, 111 - Huawei, 114 - ZTE IMS, 119 - PhonePower, 120 - TELKOM SA.

#Number: 100, 102, 108, 109, 111, 114, 119, 120

#Mandatory 

P198=100

################################################################################

#Profile 1-Call Features Settings

################################################################################

#Enable Call Features. 0 - No, 1 - Yes, 2 - Enable All

P191="0"

# Reset Call Features. 0 - No, 1 - Yes

# Number: 0, 1

# Mandatory

P24199=0

#SRTP Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Enable feature code numbers

#Third value - Disable feature code numbers

P24060=1

P24001=16

P24002=17

#SRTP per call Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Enable feature code numbers

#Third value - Disable feature code numbers

P24061=1

P24003=18

P24004=19

#CID Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Enable feature code numbers

#Third value - Disable feature code numbers

P24062=1

P24005=31

P24006=30

#CID per call Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Enable feature code numbers

#Third value - Disable feature code numbers

P24065=1

P24019=82

P24010=67

#Direct IP calling Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24063=1

P24007=47

#CW Feature. 

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Enable feature code numbers

#Third value - Disable feature code numbers

P24064=1

P24009=51

P24008=50

#CW per call Feature. 

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Enable feature code numbers

#Third value - Disable feature code numbers

P24067=1

P24013=71

P24012=70

#Call return Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24066=1

P24011=69

#Unconditional forward Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Enable feature code numbers

#Third value - Disable feature code numbers

P24068=1

P24014=72

P24015=73

#Busy forward Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Enable feature code numbers

#Third value - Disable feature code numbers

P24072=1

P24021=90

P24022=91

#Delayed forward Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Enable feature code numbers

#Third value - Disable feature code numbers

P24073=1

P24023=92

P24024=93

#Paging Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24069=1

P24016=74

#DND Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Enable feature code numbers

#Third value - Disable feature code numbers

P24070=1

P24017=78

P24018=79

#Blind Transfer Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24071=1

P24020=87

#Disable LEC per call Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24074=1

P24025=03

#Disable Bellcore-style 3-Way Conference. 0 - No, 1 - Yes

P4830=0

#Star Code 3WC Feature. 0 - No, 1 - Yes

P24075=1

#Star Code 3WC

P24026=23

#Provision start Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24086=1

P24037=99

#Play registration id Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24087=1

P24038=98

#Forced Codec Feature. 

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24059=1

P24000=02

#PCMU codec feature. 

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24076=1

P24027=7110

#PCMA codec feature

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24077=1

P24028=7111

#G723 codec feature

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24078=1

P24029=723

#G729 codec feature

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24079=1

P24030=729

#AAL2-G726-R16 codec 

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24080=1

P24031=72616

#AAL2-G726-R24 codec feature

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24081=1

P24032=72624

#AAL2-G726-R32 codec feature

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24082=1

P24033=72632

#AAL2-G726-R40 codec 

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24083=1

P24034=72640

#iLBC codec feature

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24084=1

P24035=7201

#G722 codec feature

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24085=1

P24036=722

################################################################################

#Profile 1-Ring Tones

################################################################################

#Distinctive Ring Tones#########################################################

#Distinctive Ring Tone 

#0 - Ring Tone 1, 1 - Ring Tone 2, 2 - Ring Tone 3, 3 - Ring Tone 4, 4 - Ring Tone 5, 

#5 - Ring Tone 6, 6 - Ring Tone 7, 7 - Ring Tone 8, 8 - Ring Tone 9, 9 - Ring Tone 10

#Distinctive Ring Tone 1

#Number: 0 to 9

#Mandatory

P870=0

#Choice 1 incoming caller ID

#String Max Length: 64

P871=

#Distinctive Ring Tone 2

#Number: 0 to 9

#Mandatory

P872=0

#Choice 2 incoming caller ID

#String Max Length: 64 

P873=

#Distinctive Ring Tone 3

#Number: 0 to 9

#Mandatory 

P874=0

#Choice 3 incoming caller ID

#String Max Length: 64

P875=

#Ring Tone Cadences################################################################################

#Syntax: c=on1/ off1[- on2/ off2[- on3/ off3]];(Cadence on and off are in 10 ms units)

#Ring Tone 1

#String Max Length: 256

P4010=c=2000/4000;

#Ring Tone 2

#String Max Length: 256 

P4011=c=2000/4000;

#Ring Tone 3

#String Max Length: 256 

P4012=c=2000/4000; 

#Ring Tone 4

#String Max Length: 256 

P4013=c=2000/4000;

#Ring Tone 5

#String Max Length: 256

P4014=c=2000/4000;

#Ring Tone 6

#String Max Length: 256 

P4015=c=2000/4000;

#Ring Tone 7

#String Max Length: 256

P4016=c=2000/4000;

#Ring Tone 8

#String Max Length: 256 

P4017=c=2000/4000;

#Ring Tone 9

#String Max Length: 256 

P4018=c=2000/4000; 

#Ring Tone 10

#String Max Length: 256 

P4019=c=2000/4000;

################################################################################

#Profile 1- Call Waiting Tones

################################################################################

# Distinctive Call Waiting Tones#########################################################

# Distinctive Call Waiting Tone 1

# Number: 0-9

# Mandatory

P29074=0 

# Distinctive Call Waiting Tone 2

# Number: 0-9

# Mandatory

P29075=0 

# Distinctive Call Waiting Tone 3

# Number: 0-9

# Mandatory

P29076=0

# Distinctive Call Waiting Tone CID matching plan for Tone 1

# Max Length: 64

P29077= 

# Distinctive Call Waiting Tone CID matching plan for Tone 2

# Max Length: 64

P29078= 

# Distinctive Call Waiting Tone CID matching plan for Tone 3

# Max Length: 64

P29079= 

# Call Waiting Tone Cadences#################################

# Syntax: f1=val, f2=val[, c=on1/ off1[- on2/ off2[- on3/ off3]]]; (Frequencies are in Hz and cadence on and off are in 1 ms units)

# Call Waiting Tone 1 - Call Waiting Tone 10

# Mandatory

P29080 = f1=440@-13,c=300/10000-300/10000-0/0;

P29081 = f1=440@-13,c=300/10000-300/10000-0/0;

P29082 = f1=440@-13,c=300/10000-300/10000-0/0;

P29083 = f1=440@-13,c=300/10000-300/10000-0/0;

P29084 = f1=440@-13,c=300/10000-300/10000-0/0;

P29085 = f1=440@-13,c=300/10000-300/10000-0/0;

P29086 = f1=440@-13,c=300/10000-300/10000-0/0;

P29087 = f1=440@-13,c=300/10000-300/10000-0/0;

P29088 = f1=440@-13,c=300/10000-300/10000-0/0;

P29089 = f1=440@-13,c=300/10000-300/10000-0/0;

################################################################################

#Profile 2-General Settings

################################################################################

#Profile Active.  0 - no, 1 - yes

#Number: 0,1

#Mandatory

P401=1

#Primary SIP Server

#String: serveraddress 

P747=sip.mycompany.com

#Failover SIP Server

#String: serveraddress 

P987=

#Prefer Primary SIP Server. 0 - No, 1 - Yes.

#Number: 0,1

#Mandatory

P4568=0

#Outbound Proxy

#String: serveraddress 

P748=proxy.mycompany.com

# Backup Outbound Proxy.

# String: serveraddress

P2433=

# Prefer Primary Outbound Proxy. 0 - No, 1 - Yes

# Number: 0, 1

# Mandatory

P28097=0

################################################################################

#Profile 2-Network Settings

################################################################################

#Layer 3 QoS SIP Diff-Serv (default 24)

#Number

#Mandatory

P5047=24

#Layer 3 QoS RTP Diff-Serv (default 46)

#Number

#Mandatory

P5051=46

#DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV, 3 - Use Configured IP .

#Number: 0,1,2,3

#Mandatory 

P702=0

#Primary IP

#IP address

P2408=

#Backup IP1

#IP address

P2409=

#Backup IP2

#IP address

P2410=

#NAT Traversal (STUN). 0 - No, 2 - No but send keep-alive, 1 - Yes

#Number: 0,1,2

#Mandatory

P730=0

#Use NAT IP.  This will enable our SIP client to use this IP in the SIP message. Example 64.3.153.50.

#String: ipaddress 

P866=

#Proxy-Require (A SIP extension to enable firewall penetration)

#String: ipaddress 

P792=

################################################################################

#Profile 2-SIP Settings

################################################################################

#Basic Settings#################################################################

#SIP Transport. 0 - UDP, 1 - TCP, 2 - TLS

#Number: 0,1,2

#Mandatory

P830=0

#SIP Registration. 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P731=1

#Unregister On Reboot. 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P752=0

#Add Auth Header On Initial REGISTER

#Number: 0,1

#Mandatory 

P2459=0

#Outgoing call without Registration. 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P813=1

#Register Expiration (in minutes. default 1 hour, max 45 days)

#Number: 1 to 64800

#Mandatory 

P732=60

#SIP Registration Failure Retry Wait Time (in seconds. Between 1-3600, default is 30)

#Number: 1 to 3600

#Mandatory 

P471=30

# SIP Registration Failure Retry Wait Time upon 403 Forbidden. 0 second means stop retry registration. Default is 1200 sec.

# Number 0 to 3600

# Mandatory

P26102=1200

#Reregister before Expiration

#Number

#Mandatory

P2430=0

# Enable SIP OPTIONS/NOTIFY Keep Alive. 0 - No, 1 - OPTIONS, 2 - NOTIFY

# Number: 0, 1, 2

# Mandatory

P2497 = 0

# Enable SIP OPTIONS/NOTIFY Keep Alive Interval. In seconds. The default value is 30 seconds.

# Number: 1 - 64800

# Mandatory

P2498 = 30

# SIP OPTIONS/NOTIFY Keep Alive Max Lost. In packages. The default value is 3 packages.

# Number: 3 - 10

# Mandatory

P2499 = 3

#Local SIP port (default 6060)

#Number: 1 to 65535

#Mandatory 

P740=6060

#Use Random SIP Port 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P778=0

#Local RTP port (1024-65535, default 51000)

#Number: 1024 to 65535

#Mandatory

P739 = 51000

#SIP T1 Timeout. RFC 3261 T1 value.

#50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default 100.

#Number: 50,100,200,400,800

#Mandatory

P440=50

#SIP T2 Timeout. RFC 3261 T2 value.

#200 - 2 sec, 400 - 4 sec, 800 - 8 sec, 1600 - 16 sec, 3200 - 32 sec. Default 400.

#Number: 1600,3200,200,400,800

#Mandatory 

P441=400

#Remove OBP from Route Header. 0 - no, 1 - yes

#NUmber: 0,1

#Mandatory

P4563=0

#Support SIP Instance ID. 0 - no, 1 - yes

#Number: 0,1

#Mandatory

P489=1

# Hold Target Before Refer 0 - No, 1 - Yes

# Number: 0, 1

# Mandatory

P26103=1

#Refer-To Use Target Contact. 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P469=

#SUBSCRIBE for MWI. 0 - No, 1 - Yes.

#Number: 0,1

#Mandatory

P709=0

#Enable 100rel. 0 - No, 1 - Yes

#Number: 0 to 1

#Mandatory 

P435=0

#Tel URI. 0 - Disabled, 1 - User=Phone, 2 - Enabled

#Number: 0,1,2

#Mandatory 

P763=0

#Use Request Routing ID in SIP Headers, 0 - No, 1 - Yes

#Number: 0,1

#Mandatory 

P4892=0

#Do Not Escape '#' as %23 in SIP URI. 0 - No, 1 - Yes

#Number: 0, 1

#Mandatory

P4895= 0

#Disable Multiple m Line in SDP. 0 - No, 1 - Yes

P487= 0

#Use Privacy Header. 0 - Default, 1 - No, 2 - Yes

#Number: 0, 1, 2

#Mandatory

P2438= 0

#Use P-Preferred-Identity Header. 0 - Default, 1 - No, 2 - Yes

#Number: 0, 1, 2

#Mandatory

P2439= 0

#SIP REGISTER Contact Header Uses. 0 - LAN Address, 1 - WAN Address

#Number: 0, 1

#Mandatory

#P4438=0

# Caller ID Display. 0 - Auto, 1 - Disable, 2 - From Header

# Number: 0, 1, 2

# Mandatory

P2424=0

# Use Actual Ephemeral Port in Contact with TCP/TLS. 0 - No, 1 - Yes

# Number: 0, 1

# Mandatory

P2431 = 0

#Session Timer################################################################################

#Session Expiration (in seconds. default 180 seconds. Allowed value: 90-65535)

#Number: 90 to 64800

#Mandatory 

P434=180

#Minimum SE (in seconds. default 90 seconds, must be lower than or equal to P260)

#Number 90 to 64800

#Mandatory 

P427=90

#Caller Request Timer (Request for timer when calling) 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P428=0

#Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P429=0

#Force Timer (Still use timer when remote party does not support timer) 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P430=0

#UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS

#Number: 0,1,2

#Mandatory 

P432=0

#UAS Specify Refresher. 1 - UAC, 2 - UAS

#Number: 1,2

#Mandatory 

P433=1

#Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE) 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P431=0

#Security Settings################################################################################

#Validate Incoming Messages. 0 - No, 1 - Yes

#Number: 0,1

#Mandatory 

P4341=0

#Check SIP User ID for Incoming INVITE. 0 - No, 1 - Yes (no direct IP calling if Yes)

#Number: 0,1

#Mandatory 

P449=0 

#Allow Incoming SIP Messages from SIP Proxy Only

#Number: 0,1

#Mandatory 

P743=0

#Authenticate incoming INVITE 

#Number: 0,1

P2446=0

# Authenticate server certificate domain. 0 - No, 1 - Yes, default is 0

# Number: 0, 1

# Mandatory

P2411=0

# Authenticate server certificate chain. 0 - No, 1 - Yes, default is 0

# Number: 0, 1

# Mandatory

P2467=0

################################################################################

#Profile 2-Fax Settings

################################################################################

#FAX Mode. 0 - T.38 (Auto Detect), 1 - Pass Through

#Number: 0,1

#Mandatory 

P710=0

#Fax Tone Detection Mode. 1 - Caller, 0 - Callee, 2 - Caller or Callee

#Number: 0,1,2

#Mandatory 

P895=0

#Send Re-INVITE After Fax. 0 - No, 1 - Yes

#Number: 0,1

#Mandatory 

P4368=0

#Send Re-INVITE After Fax Tone. 0 - No, 1 - Yes

#Number: 0,1

#Mandatory 

P4417=1

#Enable Silence Detection for Fax Disconnect. 0 - No, 1 - Yes

#Number: 0 to 1

#Mandatory 

P4407=1

################################################################################

#Profile 2-Audio Settings

################################################################################

#Preferred DTMF Method 1 

#100 - In-audio, 101 - RFC2833, 102 - SIP INFO

#Priority 1

#Number: 100 to 102

#Mandatory

P860=100

#Preferred DTMF Method 2

#Number: 100 to 102

#Mandatory 

P861=100

#Preferred DTMF Method 3

#Number: 100 to 102

#Mandatory 

P862=100

#DTMF-RELAY Tag Respect SIP INFO. 0 - No, 1 - Yes (If set to "NO", the dtmf-relay tag in Accept Header is always added in outbound INVITE. If set to "YES", it depends on if SIP INFO is chosen in Prefered DTMF Method.)

#Number: 0, 1

#Mandatory

P28089=0

#Disable DTMF Negotiation. 0 - no, 1 - yes 

#Number: 0,1

#Mandatory

P4826=0

#Enable Fast RFC2833. 0 - No, 1 - Yes

#Number: 0,1

#Mandatory

P21918=0

#DTMF Payload Type

#Number: 96 to 127

P779=101

#Preferred Vocoder

#0 - PCMU, 8 - PCMA, 4 - G.723, 18 - G.729, 2 - G.726-32, 100 - AAL2-G.726-16,

#102 - AAL2-G.726-24, 104 - AAL2-G726-32, 103 - AAL2-G.726-40, 98 - iLBC, 9 - G.722(wide band)

#Choice 1. 

#Mandatory

P757=0

#Choice 2. 

#Mandatory

P758=8

#Choice 3. 

#Mandatory

P759=4

#Choice 4. 

#Mandatory 

P760=18

#Choice 5. 

#Mandatory

P761=2

#Choice 6. 

#Mandatory 

P762=98

#Choice 7. 

#Mandatory

P814=104

#Choice 8. 

#Mandatory

P815=100

#Voice Frame per TX. (Default 2, from 1 to 4 for G711/G726/G729)

#Number: 1 to 4

P737=2

#G723 rate. 0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate

#Number: 0,1

#Mandatory 

P749=0

#G726-32 Packing Mode. 0 - ITU, 1 - IETF

#Number: 0,1

#Mandatory 

P2423=0

#iLBC Frame Size. 0 - 20ms(default), 1 - 30ms.

#Number: 0,1

#Mandatory 

P705=0

#iLBC payload type. Between 96 and 127, default is 97.

#Number: 96 to 127

#Mandatory 

P704=97

#AAL2-G.726-16 Payload type. (between 96 and 127, default is 100)

#Number: 96 to 127

#Mandatory 

P819=100

#AAL2-G.726-24 Payload type. (between 96 and 127, default is 99)

#Number: 96 to 127

#Mandatory 

P820=99

#AAL2-G726-32 payload type. (between 96 and 127, default is 104)

#Number: 96 to 127

#Mandatory 

P821=104

#AAL2-G.726-40 Payload type. (between 96 and 127, default is 103)

#Number: 96 to 127

#Mandatory 

P822=103

#Use First Matching Vocoder in 200OK SDP. 0 - No, 1 - Yes

#Number: 0,1

#Mandatory 

P4364=0

#SRTP Mode

#0=Disabled

#1=Enabled but not forced

#2=Enabled and forced

#Number: 0,1,2

#Mandatory

P443=0

# Crypto Life Time

# 0 = Disabled

# 1 = Enabled

# Number: 0, 1

# Mandatory

P2463=1

#Silence Suppression (VAD). 0 - No, 1 - Yes

#Number: 0,1

#Mandatory 

P750=0

#Jitter Buffer Type. 0 - Fixed, 1 - Adaptive

#Number: 0,1

#Mandatory

P831= 1

#Jitter Buffer Length. 0 - Low, 1 - Medium, 2 - High

#Number: 0,1,2

#Mandatory

P832=1

# RTCP. 0 - Disable, 1 - Enable

# Number: 0, 1

# Mandatory

P2492=1

#SLIC Setting

#0 - USA, 1 - AUSTRIA, 2 - BELGIUM, 3 - FINELAND, 4 - FRANCE, 5 - GERMANY

#6 - GREECE, 7 -ITALY, 8 - JAPAN, 9 - NORWAY, 10 - SPAIN, 11 - SWEDEN,

#12 - UK, 13 - AUSTRALIA/NEW ZEALAND, 14 - CHINA

#Number: 0 to 14

#Mandatory 

P864=0

# Ringing Frequency. 0 - Default, 1 - 20Hz, 2 - 25Hz

# Number: 0, 1, 2

# Mandatory

P4430 = 0

#Caller ID Scheme

#0  - Bellcore/Telcordia

#1  - ETSI-FSK during ringing

#2  - ETSI-FSK prior to ringing with DTAS

#3  - ETSI-FSK prior to ringing with LR

#4  - ETSI-FSK prior to ringing with RP

#5  - ETSI-DTMF during ringing

#6  - ETSI-DTMF prior to ringing with DTAS

#7  - ETSI-DTMF prior to ringing with LR

#8  - ETSI-DTMF prior to ringing with RP

#9  - SIN 227 - BT

#10 - NTT Japan

#Number: 0 to 10

#Mandatory 

P863=0

#Polarity Reversal.  0 - No, 1 - Yes

#Number: 0,1

#Mandatory 

P865=0

#Loop Current Disconnect. 0 - No, 1 - Yes

#Number: 0,1

#Mandatory 

P893=0

# Play busy/reorder tone before Loop Current Disconnect

# 0 = Disabled

# 1 = Enabled

# Number: 0, 1

# Mandatory

P21926=0

#Loop Current Disconnect Duration. In 100 - 10000 milliseconds range, default is 200.

#Number: 100 to 10000

#Mandatory 

P857=200

#Enable Hook Flash

#Number: 0, 1

#Mandatory

P4425=1

#Hook Flash Timing. In 40-2000 milliseconds range

#minimum

#Number: 40 to 2000

#Mandatory

P811=300

#maximum

#Number: 40 to 2000

#Mandatory 

P812=1100

#On Hook Timing. (In 40-2000 milliseconds range, default is 400)

#Number: 40 to 2000

#Mandatory 

P834=400

#Gain:

#TX 

#<value=1> +6dB

#<value=2> +4dB

#<value=3> +2dB

#<value=0> 0dB

#<value=4> -2dB

#<value=5> -4dB

#<value=6> -6dB

#Number: 0 to 6

#Mandatory 

P248=0 

#RX 

#<value=1> +6dB

#<value=2> +4dB

#<value=3> +2dB

#<value=0> 0dB

#<value=4> -2dB

#<value=5> -4dB

#<value=6> -6dB

#Number: 0 to 6

#Mandatory 

P283=0

#Disable Line Echo Canceller (LEC).  0 - No, 1 - Yes

#Number: 0,1

#Mandatory

P825=0

################################################################################

#Profile 2-Call Settings

################################################################################

#Early Dial. 0 - No, 1 - Yes (use "Yes" only if proxy supports 484 response). 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P729=0

#Dial Plan Prefix.(this prefix string is added to each dialed number)

#String Max Length: 32

P766=

#Dial Plan 

#String Max Length: 1024

P4201={ x+ | *x+ }

#Use #as Dial Key (if set to Yes, "#" will function as the "(Re-)Dial" key). 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P772=1

# Disable # as Redial Key. 0 - No, 1 - Yes

# Number: 0, 1

# Mandatory

P28148 = 0

#No Key Entry Timeout. Default - 4 seconds.

#Number: 1 to 15

#Mandatory

P292=4

#Offhook Auto-Dial Delay (default is 0)

#String: 0 to 60

P4046=0

# Allow Auto-Dial Config Per Port. 0 - Disable, 1 - Enable

# Number: 0, 1

# Mandatory

P28130=0

# RFC2543 Hold. 0 - No, 1 - Yes

# Number: 0, 1

# Mandatory

P26162=1 

#Disable Call Waiting. 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P791=0

#Disable Call Waiting Caller ID. 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P823=0

#Disable Call Waiting Tone. 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P817=0

#Disable Connected Line ID. 0 = Disabled, 1 = Enabled (If yes, Connected Line ID will not be displayed even received.)

#Number: 0, 1

#Mandatory

P20526=0

#Disable Receiver Offhook Tone. 0 - No, 1 - Yes.

#Number: 0,1

#Mandatory 

P4794=0

#Disable Reminder Ring for On-Hold Call:

#Number: 0,1

#Mandatory 

P4361=0

# Disable Reminder Ring for DND. 0 - No, 1 - Yes

# Number: 0, 1

# Mandatory

P29172 = 0

# Disable Voicemail Reminder Tone. 0 - No, 1 - Yes

# Number: 0, 1

# Mandatory

P28143 = 0

#Disable Visual MWI. 0 - No, 1 - Yes

#Number: 0,1

#Mandatory 

P869=0

#Visual MWI type: 1 - FSK, 2 - Neon

#Number: 1,2

#Mandatory

P4372=1

#Transfer on Conference Hangup. 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P4561=0

#Send Hook Flash Event. 0 - no, 1 - yes 

#Number: 0 to 1

#Mandatory 

P774=0

#Flash Digit Control. 0 - No, 1 - Yes(Set Yes will overrides the default settings for call control when both channels are in use.) 

#Number: 0, 1

#Mandatory

P28081=0

# Callee Flash to 3WC. 0 - No, 1 - Yes

# Number: 0, 1

# Mandatory

P28170 = 0 

#Ring Timeout. (0, 10-300, default is 60 seconds. When set to 0, the Ring Timeout feature is disabled)

#Number: 10 to 300

#Mandatory 

P816=60

#Delayed Call Forward Wait Time. Allowed range 1-120, in seconds. Default 20 seconds.

#Number: 1 to 120

#Mandatory

P470=20

#Send Anonymous. 0 - no, 1 - yes (caller ID will be blocked if set to Yes).

#Number: 0 to 1

#Mandatory 

P765=0

#Anonymous Call Rejection. 0 - No, 1 - Yes.

#Number: 0 to 1

#Mandatory 

P446=0

# Replace Beginning '+' with 00 in Caller ID. 0 - No, 1 - Yes

# Number: 0, 1

# Mandatory

P29173=0

#Hunting Group Type. 0 - Circular, 1 - Linear

#Number: 0,1

#Mandatory

P4396=0

#Hunting Group Ring Timeout. (5-300, default is 20 seconds)

#Number: 5 to 300

#Mandatory 

P4331=20

#Special Feature

#100 - Standard, 102 - BroadSoft, 108 - CBCOM, 109 - RNK, 111 - Huawei, 114 - ZTE IMS, 119 - PhonePower, 120 - TELKOM SA.

#Number: 100, 102, 108, 109, 111, 114, 119, 120

#Mandatory 

P767=100

################################################################################

#Profile 2-Call Features Settings

################################################################################

#Enable Call Features. 0 - No, 1 - Yes, 2 - Enable All

P751=1

# Reset Call Features. 0 - No, 1 - Yes

# Number: 0, 1

# Mandatory

P24399=0 

#SRTP Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Enable feature code numbers

#Third value - Disable feature code numbers

P24260=1

P24201=16

P24202=17

#SRTP per call Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Enable feature code numbers

#Third value - Disable feature code numbers

P24261=1

P24203=18

P24204=19

#CID Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Enable feature code numbers

#Third value - Disable feature code numbers

P24262=1

P24205=31

P24206=30

#CID per call Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Enable feature code numbers

#Third value - Disable feature code numbers

P24265=1

P24219=82

P24210=67

#Direct IP calling Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24263=1

P24207=47

#CW Feature. 

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Enable feature code numbers

#Third value - Disable feature code numbers

P24264=1

P24209=51

P24208=50

#CW per call Feature. 

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Enable feature code numbers

#Third value - Disable feature code numbers

P24267=1

P24213=71

P24212=70

#Call return Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24266=1

P24211=69

#Unconditional forward Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Enable feature code numbers

#Third value - Disable feature code numbers

P24268=1

P24214=72

P24215=73

#Busy forward Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Enable feature code numbers

#Third value - Disable feature code numbers

P24272=1

P24221=90

P24222=91

#Delayed forward Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Enable feature code numbers

#Third value - Disable feature code numbers

P24273=1

P24223=92

P24224=93

#Paging Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24269=1

P24216=74

#DND Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Enable feature code numbers

#Third value - Disable feature code numbers

P24270=1

P24217=78

P24218=79

#Blind Transfer Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24271=1

P24220=87

#Disable LEC per call Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24274=1

P24225=03

#Disable Bellcore-style 3-Way Conference. 0 - No, 1 - Yes

P4831=0

#Star Code 3WC Feature. 0 - No, 1 - Yes

P24275=1

#Star Code 3WC

P24226=23

#Provision start Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24286=1

P24237=99

#Play registration id Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24287=1

P24238=98

#Forced Codec Feature. 

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24259=1

P24200=02

#PCMU codec feature. 

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24276=1

P24227=7110

#PCMA codec feature

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24277=1

P24228=7111

#G723 codec feature

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24278=1

P24229=723

#G729 codec feature

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24279=1

P24230=729

#AAL2-G726-R16 codec 

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24280=1

P24231=72616

#AAL2-G726-R24 codec feature

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24281=1

P24232=72624

#AAL2-G726-R32 codec feature

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24282=1

P24233=72632

#AAL2-G726-R40 codec 

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24283=1

P24234=72640

#iLBC codec feature

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24284=1

P24235=7201

#G722 codec feature

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24285=1

P24236=722

################################################################################

#Profile 2-Ring Tones

################################################################################

#Distinctive Ring Tones#########################################################

#Distinctive Ring Tone 

#0 - Ring Tone 1, 1 - Ring Tone 2, 2 - Ring Tone 3, 3 - Ring Tone 4, 4 - Ring Tone 5, 

#5 - Ring Tone 6, 6 - Ring Tone 7, 7 - Ring Tone 8, 8 - Ring Tone 9, 9 - Ring Tone 10

#Distinctive Ring Tone 1

#Number: 0 to 9

#Mandatory

P880=0

#Choice 1 incoming caller ID

#String Max Length: 64

P881=

#Distinctive Ring Tone 2

#Number: 0 to 9

#Mandatory

P882=0

#Choice 2 incoming caller ID

#String Max Length: 64 

P883=

#Distinctive Ring Tone 3

#Number: 0 to 9

#Mandatory 

P884=0

#Choice 3 incoming caller ID

#String Max Length: 64

P885=

#Ring Tone Cadences################################################################################

#Syntax: c=on1/ off1[- on2/ off2[- on3/ off3]];(Cadence on and off are in 10 ms units)

#Ring Tone 1

#String Max Length: 256

P4030=c=2000/4000;

#Ring Tone 2

#String Max Length: 256 

P4031=c=2000/4000;

#Ring Tone 3

#String Max Length: 256 

P4032=c=2000/4000; 

#Ring Tone 4

#String Max Length: 256 

P4033=c=2000/4000;

#Ring Tone 5

#String Max Length: 256

P4034=c=2000/4000;

#Ring Tone 6

#String Max Length: 256 

P4035=c=2000/4000;

#Ring Tone 7

#String Max Length: 256

P4036=c=2000/4000;

#Ring Tone 8

#String Max Length: 256 

P4037=c=2000/4000;

#Ring Tone 9

#String Max Length: 256 

P4038=c=2000/4000; 

#Ring Tone 10

#String Max Length: 256 

P4039=c=2000/4000;

# Distinctive Call Waiting Tones##########################################################

# Distinctive Call Waiting Tone 1

# Number: 0-9

# Mandatory

P29174=0 

# Distinctive Call Waiting Tone 2

# Number: 0-9

# Mandatory

P29175=0

# Distinctive Call Waiting Tone 3

# Number: 0-9

# Mandatory

P29176=0

# Distinctive Call Waiting Tone CID matching plan for Tone 1

# Max Length: 64

P29177= 

# Distinctive Call Waiting Tone CID matching plan for Tone 2

# Max Length: 64

P29178= 

# Distinctive Call Waiting Tone CID matching plan for Tone 3

# Max Length: 64

P29179= 

# Call Waiting Tone Cadences ##############################################################

# Syntax: f1=val, f2=val[, c=on1/ off1[- on2/ off2[- on3/ off3]]];

# (Frequencies are in Hz and cadence on and off are in 1 ms units)

# Call Waiting Tone 1 - Call Waiting Tone 10

# Mandatory

P29180=f1=440@-13,c=300/10000-300/10000-0/0;

P29181=f1=440@-13,c=300/10000-300/10000-0/0;

P29182=f1=440@-13,c=300/10000-300/10000-0/0;

P29183=f1=440@-13,c=300/10000-300/10000-0/0;

P29184=f1=440@-13,c=300/10000-300/10000-0/0;

P29185=f1=440@-13,c=300/10000-300/10000-0/0;

P29186=f1=440@-13,c=300/10000-300/10000-0/0;

P29187=f1=440@-13,c=300/10000-300/10000-0/0;

P29188=f1=440@-13,c=300/10000-300/10000-0/0;

P29189=f1=440@-13,c=300/10000-300/10000-0/0;

################################################################################

#Profile 3-General Settings

################################################################################

#Profile Active.  0 - no, 1 - yes

#Number: 0,1

#Mandatory

P501=1

#Primary SIP Server

#String: serveraddress 

P547=sip.mycompany.com

#Failover SIP Server

#String: serveraddress 

P997=

#Prefer Primary SIP Server. 0 - No, 1 - Yes.

#Number: 0,1

#Mandatory

P4569=0

#Outbound Proxy

#String: serveraddress 

P548=proxy.mycompany.com

# Backup Outbound Proxy.

# String: serveraddress

P2533=

# Prefer Primary Outbound Proxy. 0 - No, 1 - Yes

# Number: 0, 1

# Mandatory

P28098=0

################################################################################

#Profile 3-Network Settings

################################################################################

#Layer 3 QoS SIP Diff-Serv (default 24)

#Number

#Mandatory

P5048=24

#Layer 3 QoS RTP Diff-Serv (default 46)

#Number

#Mandatory

P5052=46

#DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV, 3 - Use Configured IP .

#Number: 0,1,2,3

#Mandatory 

P502=0

#Primary IP

#IP address

P2508=

#Backup IP1

#IP address

P2509=

#Backup IP2

#IP address

P2510=

#NAT Traversal (STUN). 0 - No, 2 - No but send keep-alive, 1 - Yes

#Number: 0,1,2

#Mandatory

P630=0

#Use NAT IP.  This will enable our SIP client to use this IP in the SIP message. Example 64.3.153.50.

#String: ipaddress 

P566=

#Proxy-Require (A SIP extension to enable firewall penetration)

#String: ipaddress 

P592=

################################################################################

#Profile 3-SIP Settings

################################################################################

#Basic Settings#################################################################

#SIP Transport. 0 - UDP, 1 - TCP, 2 - TLS

#Number: 0,1,2

#Mandatory

P530=0

#SIP Registration. 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P531=1

#Unregister On Reboot. 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P552=0

#Add Auth Header On Initial REGISTER

#Number: 0,1

#Mandatory 

P2559=0

#Outgoing call without Registration. 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P513=1

#Register Expiration (in minutes. default 1 hour, max 45 days)

#Number: 1 to 64800

#Mandatory 

P532=60

#SIP Registration Failure Retry Wait Time (in seconds. Between 1-3600, default is 30)

#Number: 1 to 3600

#Mandatory 

P571=30

# SIP Registration Failure Retry Wait Time upon 403 Forbidden. 0 second means stop retry registration. Default is 1200 sec.

# Number 0 to 3600

# Mandatory

P26202=1200

#Reregister before Expiration

#Number

#Mandatory

P2530=0

# Enable SIP OPTIONS/NOTIFY Keep Alive. 0 - No, 1 - OPTIONS, 2 - NOTIFY

# Number: 0, 1, 2

# Mandatory

P2597 = 0

# Enable SIP OPTIONS/NOTIFY Keep Alive Interval. In seconds. The default value is 30 seconds.

# Number: 1 - 64800

# Mandatory

P2598 = 30

# SIP OPTIONS/NOTIFY Keep Alive Max Lost. In packages. The default value is 3 packages.

# Number: 3 - 10

# Mandatory

P2599 = 3

#Local SIP port (default 7060)

#Number: 1 to 65535

#Mandatory 

P640=7060

#Use Random SIP Port 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P578=0

#Local RTP port (1024-65535, default 52000)

#Number: 1024 to 65535

#Mandatory

P539 = 52000

#SIP T1 Timeout. RFC 3261 T1 value.

#50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default 100.

#Number: 50,100,200,400,800

#Mandatory

P540=50

#SIP T2 Timeout. RFC 3261 T2 value.

#200 - 2 sec, 400 - 4 sec, 800 - 8 sec, 1600 - 16 sec, 3200 - 32 sec. Default 400.

#Number: 1600,3200,200,400,800

#Mandatory 

P541=400

#Remove OBP from Route Header. 0 - no, 1 - yes

#NUmber: 0,1

#Mandatory

P4564=0

#Support SIP Instance ID. 0 - no, 1 - yes

#Number: 0,1

#Mandatory

P589=1

# Hold Target Before Refer 0 - No, 1 - Yes

# Number: 0, 1

# Mandatory

P26203=1

#Refer-To Use Target Contact. 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P569=

#SUBSCRIBE for MWI. 0 - No, 1 - Yes.

#Number: 0,1

#Mandatory

P509=0

#Enable 100rel. 0 - No, 1 - Yes

#Number: 0 to 1

#Mandatory 

P535=0

#Tel URI. 0 - Disabled, 1 - User=Phone, 2 - Enabled

#Number: 0,1,2

#Mandatory 

P563=0

#Use Request Routing ID in SIP Headers, 0 - No, 1 - Yes

#Number: 0,1

#Mandatory 

P4893=0

#Do Not Escape '#' as %23 in SIP URI. 0 - No, 1 - Yes

#Number: 0, 1

#Mandatory

P4896= 0

#Disable Multiple m Line in SDP. 0 - No, 1 - Yes

P587= 0

#Use Privacy Header. 0 - Default, 1 - No, 2 - Yes

#Number: 0, 1, 2

#Mandatory

P2538= 0

#Use P-Preferred-Identity Header. 0 - Default, 1 - No, 2 - Yes

#Number: 0, 1, 2

#Mandatory

P2539= 0

#SIP REGISTER Contact Header Uses. 0 - LAN Address, 1 - WAN Address

#Number: 0, 1

#Mandatory

#P4439=0

# Caller ID Display. 0 - Auto, 1 - Disable, 2 - From Header

# Number: 0, 1, 2

# Mandatory

P2524=0

# Use Actual Ephemeral Port in Contact with TCP/TLS. 0 - No, 1 - Yes

# Number: 0, 1

# Mandatory

P2531 = 0

#Session Timer################################################################################

#Session Expiration (in seconds. default 180 seconds. Allowed value: 90-65535)

#Number: 90 to 64800

#Mandatory 

P534=180

#Minimum SE (in seconds. default 90 seconds, must be lower than or equal to P260)

#Number 90 to 64800

#Mandatory 

P527=90

#Caller Request Timer (Request for timer when calling) 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P528=0

#Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one) 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P629=0

#Force Timer (Still use timer when remote party does not support timer) 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P664=0

#UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS

#Number: 0,1,2

#Mandatory 

P632=0

#UAS Specify Refresher. 1 - UAC, 2 - UAS

#Number: 1,2

#Mandatory 

P533=1

#Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE) 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P365=0

#Security Settings################################################################################

#Validate Incoming Messages. 0 - No, 1 - Yes

#Number: 0,1

#Mandatory 

P4342=0

#Check SIP User ID for Incoming INVITE. 0 - No, 1 - Yes (no direct IP calling if Yes)

#Number: 0,1

#Mandatory 

P549=0 

#Allow Incoming SIP Messages from SIP Proxy Only

#Number: 0,1

#Mandatory 

P4043=0

#Authenticate incoming INVITE 

#Number: 0,1

P2546=0

# Authenticate server certificate domain. 0 - No, 1 - Yes, default is 0

# Number: 0, 1

# Mandatory

P2511=0

# Authenticate server certificate chain. 0 - No, 1 - Yes, default is 0

# Number: 0, 1

# Mandatory

P2567=0

################################################################################

#Profile 3-Fax Settings

################################################################################

#FAX Mode. 0 - T.38 (Auto Detect), 1 - Pass Through

#Number: 0,1

#Mandatory 

P510=0

#Fax Tone Detection Mode. 1 - Caller, 0 - Callee, 2 - Caller or Callee

#Number: 0,1,2

#Mandatory 

P595=0

#Send Re-INVITE After Fax. 0 - No, 1 - Yes

#Number: 0,1

#Mandatory 

P4369=0

#Send Re-INVITE After Fax Tone. 0 - No, 1 - Yes

#Number: 0,1

#Mandatory 

P4418=1

#Enable Silence Detection for Fax Disconnect. 0 - No, 1 - Yes

#Number: 0 to 1

#Mandatory 

P4408=1

################################################################################

#Profile 3-Audio Settings

################################################################################

#Preferred DTMF Method 1 

#100 - In-audio, 101 - RFC2833, 102 - SIP INFO

#Priority 1

#Number: 100 to 102

#Mandatory

P560=100

#Preferred DTMF Method 2

#Number: 100 to 102

#Mandatory 

P561=100

#Preferred DTMF Method 3

#Number: 100 to 102

#Mandatory 

P562=100

#DTMF-RELAY Tag Respect SIP INFO. 0 - No, 1 - Yes (If set to "NO", the dtmf-relay tag in Accept Header is always added in outbound INVITE. If set to "YES", it depends on if SIP INFO is chosen in Prefered DTMF Method.)

#Number: 0, 1

#Mandatory

P28090=0

#Disable DTMF Negotiation. 0 - no, 1 - yes 

#Number: 0,1

#Mandatory

P4827=0

#Enable Fast RFC2833. 0 - No, 1 - Yes

#Number: 0,1

#Mandatory

P21919=0

#DTMF Payload Type

#Number: 96 to 127

P579=101

#Preferred Vocoder

#0 - PCMU, 8 - PCMA, 4 - G.723, 18 - G.729, 2 - G.726-32, 100 - AAL2-G.726-16,

#102 - AAL2-G.726-24, 104 - AAL2-G726-32, 103 - AAL2-G.726-40, 98 - iLBC, 9 - G.722(wide band)

#Choice 1. 

#Mandatory

P557=0

#Choice 2. 

#Mandatory

P558=8

#Choice 3. 

#Mandatory

P559=4

#Choice 4. 

#Mandatory 

P660=18

#Choice 5. 

#Mandatory

P661=2

#Choice 6. 

#Mandatory 

P662=98

#Choice 7. 

#Mandatory

P514=104

#Choice 8. 

#Mandatory

P515=100

#Voice Frame per TX. (Default 2, from 1 to 4 for G711/G726/G729)

#Number: 1 to 4

P4593=2

#G723 rate. 0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate

#Number: 0,1

#Mandatory 

P4350=0

#G726-32 Packing Mode. 0 - ITU, 1 - IETF

#Number: 0,1

#Mandatory 

P2523=0

#iLBC Frame Size. 0 - 20ms(default), 1 - 30ms.

#Number: 0,1

#Mandatory 

P505=0

#iLBC payload type. Between 96 and 127, default is 97.

#Number: 96 to 127

#Mandatory 

P504=97

#AAL2-G.726-16 Payload type. (between 96 and 127, default is 100)

#Number: 96 to 127

#Mandatory 

P519=100

#AAL2-G.726-24 Payload type. (between 96 and 127, default is 99)

#Number: 96 to 127

#Mandatory 

P520=99

#AAL2-G726-32 payload type. (between 96 and 127, default is 104)

#Number: 96 to 127

#Mandatory 

P521=104

#AAL2-G.726-40 Payload type. (between 96 and 127, default is 103)

#Number: 96 to 127

#Mandatory 

P522=103

#Use First Matching Vocoder in 200OK SDP. 0 - No, 1 - Yes

#Number: 0,1

#Mandatory 

P4365=0

#SRTP Mode

#0=Disabled

#1=Enabled but not forced

#2=Enabled and forced

#Number: 0,1,2

#Mandatory

P543=0

# Crypto Life Time

# 0 = Disabled

# 1 = Enabled

# Number: 0, 1

# Mandatory

P2563=1

#Silence Suppression (VAD). 0 - No, 1 - Yes

#Number: 0,1

#Mandatory 

P550=0

#Jitter Buffer Type. 0 - Fixed, 1 - Adaptive

#Number: 0,1

#Mandatory

P631= 1

#Jitter Buffer Length. 0 - Low, 1 - Medium, 2 - High

#Number: 0,1,2

#Mandatory

P835=1

# RTCP. 0 - Disable, 1 - Enable

# Number: 0, 1

# Mandatory

P2592=1

#SLIC Setting

#0 - USA, 1 - AUSTRIA, 2 - BELGIUM, 3 - FINELAND, 4 - FRANCE, 5 - GERMANY

#6 - GREECE, 7 -ITALY, 8 - JAPAN, 9 - NORWAY, 10 - SPAIN, 11 - SWEDEN,

#12 - UK, 13 - AUSTRALIA/NEW ZEALAND, 14 - CHINA

#Number: 0 to 14

#Mandatory 

P564=0

# Ringing Frequency. 0 - Default, 1 - 20Hz, 2 - 25Hz

# Number: 0, 1, 2

# Mandatory

P4431 = 0

#Caller ID Scheme

#0  - Bellcore/Telcordia

#1  - ETSI-FSK during ringing

#2  - ETSI-FSK prior to ringing with DTAS

#3  - ETSI-FSK prior to ringing with LR

#4  - ETSI-FSK prior to ringing with RP

#5  - ETSI-DTMF during ringing

#6  - ETSI-DTMF prior to ringing with DTAS

#7  - ETSI-DTMF prior to ringing with LR

#8  - ETSI-DTMF prior to ringing with RP

#9  - SIN 227 - BT

#10 - NTT Japan

#Number: 0 to 10

#Mandatory 

P663=0

#Polarity Reversal.  0 - No, 1 - Yes

#Number: 0,1

#Mandatory 

P665=0

#Loop Current Disconnect. 0 - No, 1 - Yes

#Number: 0,1

#Mandatory 

P593=0

# Play busy/reorder tone before Loop Current Disconnect

# 0 = Disabled

# 1 = Enabled

# Number: 0, 1

# Mandatory

P21927=0

#Loop Current Disconnect Duration. In 100 - 10000 milliseconds range, default is 200.

#Number: 100 to 10000

#Mandatory 

P657=200

#Enable Hook Flash

#Number: 0, 1

#Mandatory

P4426=1

#Hook Flash Timing. In 40-2000 milliseconds range

#minimum

#Number: 40 to 2000

#Mandatory

P511=300

#maximum

#Number: 40 to 2000

#Mandatory 

P512=1100

#On Hook Timing. (In 40-2000 milliseconds range, default is 400)

#Number: 40 to 2000

#Mandatory 

P634=400

#Gain:

#TX 

#<value=1> +6dB

#<value=2> +4dB

#<value=3> +2dB

#<value=0> 0dB

#<value=4> -2dB

#<value=5> -4dB

#<value=6> -6dB

#Number: 0 to 6

#Mandatory 

P648=0 

#RX 

#<value=1> +6dB

#<value=2> +4dB

#<value=3> +2dB

#<value=0> 0dB

#<value=4> -2dB

#<value=5> -4dB

#<value=6> -6dB

#Number: 0 to 6

#Mandatory 

P683=0

#Disable Line Echo Canceller (LEC).  0 - No, 1 - Yes

#Number: 0,1

#Mandatory

P4366=0

################################################################################

#Profile 3-Call Settings

################################################################################

#Early Dial. 0 - No, 1 - Yes (use "Yes" only if proxy supports 484 response). 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P529=0

#Dial Plan Prefix.(this prefix string is added to each dialed number)

#String Max Length: 32

P666=

#Dial Plan 

#String Max Length: 1024

P4202={ x+ | *x+ }

#Use #as Dial Key (if set to Yes, "#" will function as the "(Re-)Dial" key). 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P572=1

# Disable # as Redial Key. 0 - No, 1 - Yes

# Number: 0, 1

# Mandatory

P28149 = 0

#No Key Entry Timeout. Default - 4 seconds.

#Number: 1 to 15

#Mandatory

P492=4

#Offhook Auto-Dial Delay (default is 0)

#String: 0 to 60

P4047=0

# Allow Auto-Dial Config Per Port. 0 - Disable, 1 - Enable

# Number: 0, 1

# Mandatory

P28131=0

# RFC2543 Hold. 0 - No, 1 - Yes

# Number: 0, 1

# Mandatory

P26262=1

#Disable Call Waiting. 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P591=0

#Disable Call Waiting Caller ID. 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P523=0

#Disable Call Waiting Tone. 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P517=0

#Disable Connected Line ID. 0 = Disabled, 1 = Enabled (If yes, Connected Line ID will not be displayed even received.)

#Number: 0, 1

#Mandatory

P20527=0

#Disable Receiver Offhook Tone. 0 - No, 1 - Yes.

#Number: 0,1

#Mandatory 

P4795=0

#Disable Reminder Ring for On-Hold Call:

#Number: 0,1

#Mandatory 

P4362=0

# Disable Reminder Ring for DND. 0 - No, 1 - Yes

# Number: 0, 1

# Mandatory

P29272 = 0

# Disable Voicemail Reminder Tone. 0 - No, 1 - Yes

# Number: 0, 1

# Mandatory

P28144 = 0

#Disable Visual MWI. 0 - No, 1 - Yes

#Number: 0,1

#Mandatory 

P669=0

#Visual MWI type: 1 - FSK, 2 - Neon

#Number: 1,2

#Mandatory

P4373=1

#Transfer on Conference Hangup. 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P4565=0

#Send Hook Flash Event. 0 - no, 1 - yes 

#Number: 0 to 1

#Mandatory 

P574=0

#Flash Digit Control. 0 - No, 1 - Yes(Set Yes will overrides the default settings for call control when both channels are in use.) 

#Number: 0, 1

#Mandatory

P28082=0

# Callee Flash to 3WC. 0 - No, 1 - Yes

# Number: 0, 1

# Mandatory

P28171 = 0

#Ring Timeout. (0, 10-300, default is 60 seconds. When set to 0, the Ring Timeout feature is disabled)

#Number: 10 to 300

#Mandatory 

P516=60

#Delayed Call Forward Wait Time. Allowed range 1-120, in seconds. Default 20 seconds.

#Number: 1 to 120

#Mandatory

P570=20

#Send Anonymous. 0 - no, 1 - yes (caller ID will be blocked if set to Yes).

#Number: 0 to 1

#Mandatory 

P565=0

#Anonymous Call Rejection. 0 - No, 1 - Yes.

#Number: 0 to 1

#Mandatory 

P546=0

# Replace Beginning '+' with 00 in Caller ID. 0 - No, 1 - Yes

# Number: 0, 1

# Mandatory

P29273=0

#Hunting Group Type. 0 - Circular, 1 - Linear

#Number: 0,1

#Mandatory

P4397=0

#Hunting Group Ring Timeout. (5-300, default is 20 seconds)

#Number: 5 to 300

#Mandatory 

P4332=20

#Special Feature

#100 - Standard, 102 - BroadSoft, 108 - CBCOM, 109 - RNK, 111 - Huawei, 114 - ZTE IMS, 119 - PhonePower, 120 - TELKOM SA.

#Number: 100, 102, 108, 109, 111, 114, 119, 120

#Mandatory 

P567=100

################################################################################

#Profile 3-Call Features Settings

################################################################################

#Enable Call Features. 0 - No, 1 - Yes, 2 - Enable All

P551=1

# Reset Call Features. 0 - No, 1 - Yes

# Number: 0, 1

# Mandatory

P24599=0

#SRTP Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Enable feature code numbers

#Third value - Disable feature code numbers

P24460=1

P24401=16

P24402=17

#SRTP per call Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Enable feature code numbers

#Third value - Disable feature code numbers

P24461=1

P24403=18

P24404=19

#CID Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Enable feature code numbers

#Third value - Disable feature code numbers

P24462=1

P24405=31

P24406=30

#CID per call Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Enable feature code numbers

#Third value - Disable feature code numbers

P24465=1

P24419=82

P24410=67

#Direct IP calling Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24463=1

P24407=47

#CW Feature. 

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Enable feature code numbers

#Third value - Disable feature code numbers

P24464=1

P24409=51

P24408=50

#CW per call Feature. 

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Enable feature code numbers

#Third value - Disable feature code numbers

P24467=1

P24413=71

P24412=70

#Call return Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24466=1

P24411=69

#Unconditional forward Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Enable feature code numbers

#Third value - Disable feature code numbers

P24468=1

P24414=72

P24415=73

#Busy forward Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Enable feature code numbers

#Third value - Disable feature code numbers

P24472=1

P24421=90

P24422=91

#Delayed forward Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Enable feature code numbers

#Third value - Disable feature code numbers

P24473=1

P24423=92

P24424=93

#Paging Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24469=1

P24416=74

#DND Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Enable feature code numbers

#Third value - Disable feature code numbers

P24470=1

P24417=78

P24418=79

#Blind Transfer Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24471=1

P24420=87

#Disable LEC per call Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24474=1

P24425=03

#Disable Bellcore-style 3-Way Conference. 0 - No, 1 - Yes

P4832=0

#Star Code 3WC Feature. 0 - No, 1 - Yes

P24475=1

#Star Code 3WC

P24426=23

#Provision start Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24486=1

P24437=99

#Play registration id Feature.

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24487=1

P24438=98

#Forced Codec Feature. 

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24459=1

P24400=02

#PCMU codec feature. 

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24476=1

P24427=7110

#PCMA codec feature

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24477=1

P24428=7111

#G723 codec feature

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24478=1

P24429=723

#G729 codec feature

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24479=1

P24430=729

#AAL2-G726-R16 codec 

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24480=1

P24431=72616

#AAL2-G726-R24 codec feature

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24481=1

P24432=72624

#AAL2-G726-R32 codec feature

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24482=1

P24433=72632

#AAL2-G726-R40 codec 

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24483=1

P24434=72640

#iLBC codec feature

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24484=1

P24435=7201

#G722 codec feature

#First value - Enable/Disable feature, Mandatory 0 - No, 1 - Yes

#Second value - Code numbers

P24485=1

P24436=722

################################################################################

#Profile 3-Ring Tones

################################################################################

#Distinctive Ring Tones#########################################################

#Distinctive Ring Tone 

#0 - Ring Tone 1, 1 - Ring Tone 2, 2 - Ring Tone 3, 3 - Ring Tone 4, 4 - Ring Tone 5, 

#5 - Ring Tone 6, 6 - Ring Tone 7, 7 - Ring Tone 8, 8 - Ring Tone 9, 9 - Ring Tone 10

#Distinctive Ring Tone 1

#Number: 0 to 9

#Mandatory

P580=0

#Choice 1 incoming caller ID

#String Max Length: 64

P581=

#Distinctive Ring Tone 2

#Number: 0 to 9

#Mandatory

P582=0

#Choice 2 incoming caller ID

#String Max Length: 64 

P583=

#Distinctive Ring Tone 3

#Number: 0 to 9

#Mandatory 

P584=0

#Choice 3 incoming caller ID

#String Max Length: 64

P585=

#Ring Tone Cadences################################################################################

#Syntax: c=on1/ off1[- on2/ off2[- on3/ off3]];(Cadence on and off are in 10 ms units)

#Ring Tone 1

#String Max Length: 256

P4020=c=2000/4000;

#Ring Tone 2

#String Max Length: 256 

P4021=c=2000/4000;

#Ring Tone 3

#String Max Length: 256 

P4022=c=2000/4000; 

#Ring Tone 4

#String Max Length: 256 

P4023=c=2000/4000;

#Ring Tone 5

#String Max Length: 256

P4024=c=2000/4000;

#Ring Tone 6

#String Max Length: 256 

P4025=c=2000/4000;

#Ring Tone 7

#String Max Length: 256

P4026=c=2000/4000;

#Ring Tone 8

#String Max Length: 256 

P4027=c=2000/4000;

#Ring Tone 9

#String Max Length: 256 

P4028=c=2000/4000; 

#Ring Tone 10

#String Max Length: 256 

P4029=c=2000/4000;

#######################################

# Call Waiting Tones for Profile 3 ####

#######################################

# Distinctive Call Waiting Tones#########################################################

# Distinctive Call Waiting Tone 1

# Number: 0-9

# Mandatory

P29274=0

# Distinctive Call Waiting Tone 2

# Number: 0-9

# Mandatory

P29275=0

# Distinctive Call Waiting Tone 3

# Number: 0-9

# Mandatory

P29276=0

# Distinctive Call Waiting Tone CID matching plan for Tone 1

# Max Length: 64

P29277= 

# Distinctive Call Waiting Tone CID matching plan for Tone 2

# Max Length: 64

P29278= 

# Distinctive Call Waiting Tone CID matching plan for Tone 3

# Max Length: 64

P29279= 

# Call Waiting Tone Cadences##############################################################

# Syntax: f1=val, f2=val[, c=on1/ off1[- on2/ off2[- on3/ off3]]]; (Frequencies are in Hz and cadence on and off are in 1 ms units)

# Call Waiting Tone 1 - Call Waiting Tone 10

# Mandatory

P29280=f1=440@-13,c=300/10000-300/10000-0/0;

P29281=f1=440@-13,c=300/10000-300/10000-0/0;

P29282=f1=440@-13,c=300/10000-300/10000-0/0;

P29283=f1=440@-13,c=300/10000-300/10000-0/0;

P29284=f1=440@-13,c=300/10000-300/10000-0/0;

P29285=f1=440@-13,c=300/10000-300/10000-0/0;

P29286=f1=440@-13,c=300/10000-300/10000-0/0;

P29287=f1=440@-13,c=300/10000-300/10000-0/0;

P29288=f1=440@-13,c=300/10000-300/10000-0/0;

P29289=f1=440@-13,c=300/10000-300/10000-0/0;

################################################################################

#Profile 4-General Settings

################################################################################

#Profile Active.  0 - no, 1 - yes

#Number: 0,1

#Mandatory

P601=1

#Primary SIP Server

#String: serveraddress 

P602=sip.mycompany.com

#Failover SIP Server

#String: serveraddress 

P998=

#Prefer Primary SIP Server. 0 - No, 1 - Yes.

#Number: 0,1

#Mandatory

P4570=0

#Outbound Proxy

#String: serveraddress 

P603=proxy.mycompany.com

# Backup Outbound Proxy.

# String: serveraddress

P2633=

# Prefer Primary Outbound Proxy. 0 - No, 1 - Yes

# Number: 0, 1

# Mandatory

P28099=0

################################################################################

#Profile 4-Network Settings

################################################################################

#Layer 3 QoS SIP Diff-Serv (default 24)

#Number

#Mandatory

P5049=24

#Layer 3 QoS RTP Diff-Serv (default 46)

#Number

#Mandatory

P5053=46

#DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV, 3 - Use Configured IP .

#Number: 0,1,2,3

#Mandatory 

P608=0

#Primary IP

#IP address

P2608=

#Backup IP1

#IP address

P2609=

#Backup IP2

#IP address

P2610=

#NAT Traversal (STUN). 0 - No, 2 - No but send keep-alive, 1 - Yes

#Number: 0,1,2

#Mandatory

P614=0

#Use NAT IP.  This will enable our SIP client to use this IP in the SIP message. Example 64.3.153.50.

#String: ipaddress 

P4576=

#Proxy-Require (A SIP extension to enable firewall penetration)

#String: ipaddress 

P618=

################################################################################

#Profile 4-SIP Settings

################################################################################

#Basic Settings#################################################################

#SIP Transport. 0 - UDP, 1 - TCP, 2 - TLS

#Number: 0,1,2

#Mandatory

P4648=0

#SIP Registration. 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P610=1

#Unregister On Reboot. 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P611=0

#Add Auth Header On Initial REGISTER

#Number: 0,1

#Mandatory 

P2659=0

#Outgoing call without Registration. 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P4378=1

#Register Expiration (in minutes. default 1 hour, max 45 days)

#Number: 1 to 64800

#Mandatory 

P612=60

#SIP Registration Failure Retry Wait Time (in seconds. Between 1-3600, default is 30)

#Number: 1 to 3600

#Mandatory 

P671=30

# SIP Registration Failure Retry Wait Time upon 403 Forbidden. 0 second means stop retry registration. Default is 1200 sec.

# Number 0 to 3600

# Mandatory

P26302=1200

#Reregister before Expiration

#Number

#Mandatory

P2630=0

# Enable SIP OPTIONS/NOTIFY Keep Alive. 0 - No, 1 - OPTIONS, 2 - NOTIFY

# Number: 0, 1, 2

# Mandatory

P2697 = 0

# Enable SIP OPTIONS/NOTIFY Keep Alive Interval. In seconds. The default value is 30 seconds.

# Number: 1 - 64800

# Mandatory

P2698 = 30

# SIP OPTIONS/NOTIFY Keep Alive Max Lost. In packages. The default value is 3 packages.

# Number: 3 - 10

# Mandatory

P2699 = 3

#Local SIP port (default 8060)

#Number: 1 to 65535

#Mandatory 

P613=8060

#Use Random SIP Port 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P4792=0

#Local RTP port (1024-65535, default 53000)

#Number: 1024 to 65535

#Mandatory

P4573 = 53000

#SIP T1 Timeout. RFC 3261 T1 value.

#50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default 100.

#Number: 50,100,200,400,800

#Mandatory

P4640=50

#SIP T2 Timeout. RFC 3261 T2 value.

#200 - 2 sec, 400 - 4 sec, 800 - 8 sec, 1600 - 16 sec, 3200 - 32 sec. Default 400.

#Number: 1600,3200,200,400,800

#Mandatory 

P641=400

#Remove OBP from Route Header. 0 - no, 1 - yes

#NUmber: 0,1

#Mandatory

P4790=0

#Support SIP Instance ID. 0 - no, 1 - yes

#Number: 0,1

#Mandatory

P689=1

# Hold Target Before Refer 0 - No, 1 - Yes

# Number: 0, 1

# Mandatory

P26303=1

#Refer-To Use Target Contact. 0 - no, 1 - yes

#Number: 0,1

#Mandatory 

P4649=

#SUBSCRIBE for MWI. 0 - No, 1 - Yes.

#Number: 0,1

#Mandatory

P615=0

#Enable 100rel. 0 - No, 1 - Yes

#Number: 0 to 1

#Mandatory 

P635=0

#Tel URI. 0 - Disabled, 1 - User=Phone, 2 - Enabled

#Number: 0,1,2

#Mandatory 

P609=0

#Use Request Routing ID in SIP Headers, 0 - No, 1 - Yes

#Number: 0,1

#Mandatory 

P4894=0

#Do Not Escape '#' as %23 in SIP URI. 0 - No, 1 - Yes

#Number: 0, 1

#Mandatory

P4897= 0

#Disable Multiple m Line in SDP. 0 - No, 1 - Yes

P687= 0

#Use Privacy Header. 0 - Default, 1 - No, 2 - Yes

#Number: 0, 1, 2

#Mandatory

P2638= 0

#Use P-Preferred-Identity Header. 0 - Default, 1 - No, 2 - Yes

#Number: 0, 1, 2