To perform a PEPLINK WAN ANALYSIS
Go to client Peplink
Tab > WAN ANALYSIS > Client ( YOU MUST Enter the exact ports BELOW, because these are the ports opened on our Fusion Hub for testing )
Enter our Fusion Hub WAN IP 34.198.49.243
Control Port = 6000
Data Port = 59840 (it will auto fill the 59847 range)
Select WAN 1 or WAN 2 , etc.
Enter the Fusion Hub IP = 34.198.49.243
Run Test
YOU WILL NEED TO ACTIVATE WAN ANALYSIS ON OUR FUSION HUN BELOW
WAN Analysis > SERVER
Our PEPLINK FUSION HUB
External IP of our Fusion Hub:
34.198.49.243
Control Port = 6000
These ports are open for testing 59840 to 59847
SR
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article