Peplink to Peplink IPsec Aggressive Mode to FUSION HUB Setting

This is a working setting from a branch office with Peplink Balance One looking towards the Peplink Fusion Hub.  So the branch doesn't need a static IP only the HQ and/or Fusion Hub depending on your deployment.

Note: the Local ID and Remote ID can be anything as long as it has the @ in the string ( ex; crompond@crompond , croton@croton, etc. )

Only the branch needs to add the static IP of the HQ or Fusion Hub

Preshared Key can be any string and must match on both sides

Fusion Hub and/or HQ SITE-1

Branch Location Balance One ( doesn't need a static IP / only the HQ side needs one )

Status Shows Green