This setting will double the Multicast Paging Volume over the Yealink Speaker
This setting sets the maximum enhanced value.
multicast.listen_address.1.volume="15"
multicast.receive.enhance_volume="1"
Parameter:
multicast.listen_address.1.volume=15"
Description
It configures the volume of the speaker when receiving the multicast paging calls.
If it is set to 0, the current volume of the speaker takes effect. The volume of the speaker can be adjusted by pressing the Volume key in advance when the phone is during a call. You can also adjust the volume of the speaker during the paging call.
If it is set to 1 to 15, the configured volume takes effect and the current volume of the speaker will be ignored. You are not allowed to adjust the volume of the speaker during the paging call.
Permitted Values - Integer from 0 to 15
Default 0
Parameter multicast.receive.enhance_volume="1"
Description: (this doubles the value of above volume parameter)
It enables or disables the volume enhancement feature when receiving the multicast paging calls.
Note: It works only if “multicast.listen_address.X.volume" is not set to 0. If the value the parameter:
"multicast.listen_address.X.volume" is set to 1-15 and the value of this parameter is set to 1 (Enabled), the receiving volume will be 16-30.
Permitted Values
0-Disabled
1-Enabled, the receiving volume will be increased by 15 level.
Default 0
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article