Snom PA1 Yealink Multicast Paging Channel SR

The Snom PA1 uses channel=0 and doesn't appear to be modifiable.

So when installing Yealink phones which have as default in our NDP uses channel=1 as default, you must program the following over-rides.

For Paging Address 1: etc.

multicast.paging_address.1.channel="0"

multicast.listen_address.1.channel="0"

These are the default setting below: 

( see that channel default is set to 1, this why you need to add the above two lines of code.)

### Paging Address ###

multicast.paging_address.1.label="Page"

multicast.paging_address.1.ip_address="224.0.0.1:10000"

multicast.paging_address.1.channel="1"

### Listen Address ###

multicast.listen_address.1.label="Page"

multicast.listen_address.1.ip_address="224.0.0.1:10000"

multicast.listen_address.1.channel="1"