Algo ZTP REDIRECT& ADMP Device Template Codes 6/4/2024 SR

Attached are Algo device template codes for Algo ZTP - ADMP <or> NDP or Advanced Tab programming

This is set to be compatible with Polycom & Yealink phones using Channel-1 which Polycom uses and we changed the Yealink which uses Channel-0 by default to use Channel-1 to be the same as Polycom.  6/4/2024 SR

IF the device's MAC is entered into Algo ZTP then it will redirect to the SS NDP and pull these parameters automatically.

IF the device is NOT in the Algo ZTP, then you program the provisioning string into the Web GUI of the device to direct to SS NDP.

https://dashboard.cloud.algosolutions.com/

U:  hello@sonictel.com

P:   Algopaging1!

To use both the NDP to register the device to SS and assign to our Algo ADMP portal.  This can be done using Algo ZTP by entering the MAC Address.

ZTP > NDP > ADMP

Algo ZTP sends the device to NDP for registration and initial parameters.  Within these parameters are the settings to register with Algo ADMP cloud.

If the unit has already been deployed, we can use WEB GUI to enter our Algo Reseller Number to have it attached to our Algo ADMP because ZTP only works on a defaulted device.

NOTE: The NDP will only provide device registration and set the Algo ADMP Reseller ID.  ALL other settings will be done in the Algo ADMP portal.

This ONLY needs to be entered if already online and not provisioned via ZTP > NDP

Our Sonictel Reseller ID = a24bb0fc0795406f9c7c8da547fc86b9 

Algo ADMP 

IF the device password = 649 then it was provisioned through the SS NDP.

If the device password is L1988# then it was manually provisioned.

I put this in Skyswitch NDP for Algo devices

admin.pwd=649

mcast.mode=2

mcast.polycom.mode=1

mcast.polycom.default=1

mcast.polycom.zone=224.0.0.1:10000

phone.timeout.inbound=30

audio.output.level=4

audio.page.mode=0

phone.timeout.ring=36

admin.timezone=US/Eastern

====================================

This is IF we subscribe to the Advanced Algo ZDP Device Management System similar to Yealink YMCS instead of using the NDP

sip.regexp=60

prov.server.method=static

prov.server.static=sipcfg.io/cfg

prov.download.method=http

admin.timezone=US/Eastern

iot.mqtt.ka = 30 

iot.tenant =a24bb0fc0795406f9c7c8da547fc86b9

iot.use = 1

iot.sync.conf = 1

https://www.algosolutions.com/resources/documentation/

2/26/2025 was in NDP but removed