Avaya IP Office Factory Reset Password Security Reset All

To log into system using default user name & password for administrator:

Administrator

Administrator

To log into system using default user name & password for manager:

Manager

Manager

To change security settings:

File > Advanced > Security Setting

username : security
password : securitypwd

To log into an IP Phone:

Using the dialpad craft# ( 27238# )

To FACTORY RESET PASSWORD USING RS-232 PORT

This How-To covers the reset of the Security Settings of an IP Office if you have been locked out from the config or don’t know what the Username/Password is to connect to it.

Please note, this will only work on IP Offices running R3.2 and higher as Security Settings were not present in versions earlier than this.

Steps:

1: Connect to the IP Office via DTE/Serial Cable

Connect to the IP Office using a DTE/Serial Cable via HyperTerminal or PuTTY using the following settings:

Bits per second: 38,400
Parity: None
Flow Control: None
Data Bits: 8
Stop Bits: 1
Settings | Emulation: TTY

2: Perform Security Reset Command

Once connected to the IP Office via DTE/Serial cable, enter the following command followed by Enter:

AT

This should give you an “OK” message. Once the “OK” message has been received, enter the following command and press Enter:

AT-SECURITYRESETALL

You should then be prompted to enter the MAC address of the control unit before you can continue. Once you have entered this, it should take about 1 minute before you get the resulting “OK” message.

Conclusion

You should now be able to login to the IP Office using the default Username/Password.

Press ESC key...
at
OK
at-securityresetall
Enter "00E007092AD5" to continue (the LAN1 port MAC address is displayed)
00E007092AD5 (enter the number displayed above)
OK
at-debug
Tue 25/2/2014 14:50:48, Hello>reboot
======================================================================================
Name Password Role Rights Group

Administrator Administrator These are the default accounts used for system configuration using the IP Office Manager application. Administrator, Customer Admin, System Status Group.

Manager Manager Customer Admin, Manager, System Status.

Operator   Operator    Customer Admin, Operator, System Status.

These are default passwords

Default Service Users: