Yealink Template 4/9/2014 Joey Love

{\rtf1\ansi\ansicpg1252\cocoartf1138\cocoasubrtf510
{\fonttbl\f0\fswiss\fcharset0 Helvetica;}
{\colortbl;\red255\green255\blue255;}
\margl1440\margr1440\vieww37900\viewh20120\viewkind0
\pard\tx720\tx1440\tx2160\tx2880\tx3600\tx4320\tx5040\tx5760\tx6480\tx7200\tx7920\tx8640\pardirnatural

\f0\fs24 \cf0 #!version:1.0.0.1\
\
##File header "#!version:1.0.0.1" cannot be edited or deleted, and must be placed in \
the first line. This template file is applicable to \
SIP-T28P/T26P/T22P/T21P/T20P/T19P/T48G/T46G/T42G/T41P IP phones running firmware \
version 72 or later. For more information on configuration parameters, refer to \
Yealink_SIP-T2_Series_T19P_T4_Series_IP_Phones_Auto_Provisioning_Guide. ## \
\
auto_provision.power_on = 1\
auto_provision.pnp_enable = 1\
auto_provision.server.url = ftp://\{$ftp_server\}\
auto_provision.server.username = \{$ftp_username\}\
auto_provision.server.password = \{$ftp_password\}\
\
#### PC Port(Only SIP-T28P/T26P/T22P/T20P Models support) ####\
network.bridge_mode = 1\
network.pc_port.ip = \
network.pc_port.mask = \
network.dhcp.start_ip = \
network.dhcp.end_ip = \
\
#### Network Advanced ####\
network.pc_port.enable = \
network.internet_port.speed_duplex = \
network.pc_port.speed_duplex = \
network.pc_port.dhcp_server = \
network.static_dns_enable = \
network.ipv6_static_dns_enable = \
#### Only T41P/T42G/T46G/T48G Models support this parameter ####\
network.vlan.pc_port_mode = \
\
#### VLAN ####\
network.vlan.internet_port_enable = \
network.vlan.internet_port_vid = \
network.vlan.internet_port_priority = \
network.vlan.pc_port_enable = \
network.vlan.pc_port_vid = \
network.vlan.pc_port_priority = \
network.vlan.dhcp_enable = \
network.vlan.dhcp_option = \
\
#### Account Settings ####\
\{foreach item=line_key key=position from=$extension_list\}\
account.1.enable = 1\
account.1.label = \{$line_key.line_key_label\}\
account.1.display_name = \{$line_key.extension_name\}\
account.1.user_name = \{$line_key.sip_username\}\
account.1.auth_name = \{$line_key.sip_username\}\
account.1.password = \{$line_key.sip_password\}\
account.1.sip_server.1.address = \{$sip_registration_hostname\}\
account.1.sip_listen_port = \{$sip_registration_port\}\
account.1.transport = 0\
account.1.nat.udp_update_enable = 1\
voice_mail.number.1 = *\{$line_key.mailbox_number\}\
account.1.advanced.timer_t1 = 1\
account.1.subscribe_mwi = \
account.1.subscribe_mwi_to_vm = \
account.1.nat.rport = \
account.1.codec.1.enable = 1\
account.1.codec.1.payload_type = PCMU\
account.1.codec.2.enable = 0\
account.1.codec.2.payload_type = PCMA\
account.1.codec.5.enable = 1\
account.1.codec.5.payload_type = G729\
account.1.codec.6.enable = 1\
account.1.codec.6.payload_type = G722\
\{/foreach\}\
\
#### Line Keys ####\
\{foreach item=line_key key=position from=$line_key_list\}\
\{if $line_key.line_key_type == 1\}\
linekey.\{$position\}.line = 1\
linekey.\{$position\}.value = \
linekey.\{$position\}.type = 15\
linekey.\{$position\}.label = \
\{/if\}\
\{if $line_key.line_key_type == 2\}\
linekey.\{$position\}.line = 1\
linekey.\{$position\}.value =  \{$line_key.sla_line_id\} \
linekey.\{$position\}.type = 16\
linekey.\{$position\}.label = \{$line_key.line_key_label\}\
\{/if\}\
\{if $line_key.line_key_type == 3\}\
linekey.\{$position\}.line = 1\
linekey.\{$position\}.value = \{$line_key.extension_number\} \
linekey.\{$position\}.type = 16\
linekey.\{$position\}.label = \{$line_key.line_key_label\}\
\{/if\}\
\{if $line_key.line_key_type == 4\}\
linekey.\{$position\}.line = 1\
linekey.\{$position\}.value = parkpos_\{$line_key.parking_position\}\
linekey.\{$position\}.type = 10\
linekey.\{$position\}.label = \{$line_key.line_key_label\}\
\{/if\}\
\{/foreach\}\
\
features.relog_offtime = 30\
call_waiting.enable = \
call_waiting.tone = \
features.voice_mail_tone_enable = 0\
phone_setting.backlight_time = 0\
features.blf_led_mode = 2\
transfer.dsskey_deal_type = 2\
voice.tone.country = United States\
phone_setting.custom_softkey_enable = \
\
#### Multicast Paging #### \
multicast.codec = \
multicast.receive_priority.enable = \
multicast.receive_priority.priority = \
multicast.listen_address.1.label = \
multicast.listen_address.1.ip_address = \
\
#### Time ####\
local_time.time_zone = -5\
local_time.time_zone_name = United States-Eastern Time\
local_time.ntp_server1 = \{$ntp_server\}\
local_time.ntp_server2 = \{$ntp_server\}\
local_time.time_format = 0\
local_time.date_format = 4\
\
#### Configure the access URL of the firmware file ####\
firmware.url = ftp://\{$ftp_username\}:\{$ftp_password\}@\{$ftp_server\}/29.72.0.1.rom\
\
#### Configure the access URL of the custom ring tone ####\
ringtone.url = ftp://\{$ftp_username\}:\{$ftp_password\}@\{$ftp_server\}/\
ringtone.delete = \
\
#### Configure the access URL of the Logo File ####\
#### not applicable to SIP-T20P IP phones ####\
lcd_logo.url = ftp://\{$ftp_username\}:\{$ftp_password\}@\{$ftp_server\}/\
\
#### To use the custom logo, you also need to configure the following parameter ####\
#### Configure the logo mode (not applicable to SIP-T20P IP phones) ####\
#### 0-Disabled (Except for SIP-T28P IP phones), 1-System logo, 2-Custom logo ####\
phone_setting.lcd_logo.mode = 0\
\
#### Configure the access URL of the wallpaper ####\
#### Only T48G and T46G Model supports the two parameters ####\
wallpaper_upload.url = ftp://\{$ftp_username\}:\{$ftp_password\}@\{$ftp_server\}/\
\
#### Configure the custom image (e.g., wallpaper.jpg) as phone wallpaper. ####\
#### phone_setting.backgrounds = Config:wallpaper.jpg ####\
phone_setting.backgrounds = \
\
#### Memory Key(Only for T26P/T28P Models) ####\
###T26P/T28P X ranges from 1 to 10\
#memorykey.X.type--Customize the Memorykey type.\
#The valid types are: \
\
#0-NA   1-Conference   2-Forward   3-Transfer   4-Hold   5-DND   7-Call Return   8-SMS   9-Directed Pickup   10-Call Park   11-DTMF   12-Voice Mail   13-Speed Dial   14-Intercom\
#15-Line   16-BLF   17-URL   18-Group Listening   20-Private Hold   22-XML Group   23-Group Pickup   24-Multicast Paging   25-Record   27-XML Browser\
#34-Hot Desking   35-URL Record   38-LDAP   39-BLF List   40-Prefix   41-Zero Touch   42-ACD   45-Local Group   46-Network Group   49-Custom Button\
#50-Keypad Lock   55-Meet-Me Conference   56-Retrieve Park   57-Hoteling   58-ACD Grace   59-Sisp Code   60-Emergency   61-Directory\
\
###memorykey.X.line = \
###memorykey.X.value = \
###memorykey.X.pickup_value = \
###memorykey.X.type = \
###memorykey.X.xml_phonebook =\
\
###It configures the desired line to apply the key feature.\
###The default value is 1.Integer from 1 to 6\
memorykey.1.line = \
\
###It configures the value of the memory key feature.\
###For example, when set the key feature to BLF, it configures the number of the monitored user.\
###The default value is blank.\
memorykey.1.value = \
\
###It configures the pickup code for BLF feature or conference ID followed by the # sign for Meet-Me conference feature.\
###It only applies to BLF and Meet-Me conference features.\
###The default value is blank.\
memorykey.1.pickup_value = \
\
###It configures the desired feature for memory key X.\
###The default value is 0.\
memorykey.1.type = \
\
###It configures the desired local group/XML group/network group for the memory key X.\
###It only applies to the Local Group, XML Group and Network Group features.\
###The default value is 0.\
memorykey.1.xml_phonebook =\
\
#### Line Key ####\
###Except T19D Model\
###T21D/T20P X ranges from 1 to 2\
###T22P/T26P X ranges from 1 to 3\
###T28P X ranges from 1 to 6\
###T41P/T42G X ranges from 1 to 15\
###T46G X ranges from 1 to 27\
\
#linekey.X.type--Customize the linekey type.\
#The valid types are: \
\
#0-NA   1-Conference   2-Forward   3-Transfer   4-Hold   5-DND   7-Call Return   8-SMS   9-Directed Pickup   10-Call Park  11-DTMF   12-Voice Mail   13-Speed Dial\
#14-Intercom   15-Line   16-BLF   17-URL   18-Group Listening  20-Private Hold   22-XML Group   23-Group Pickup  24-Multicast Paging  25-Record   27-XML Browser\
#34-Hot Desking   35-URL Record   38-LDAP   39-BLF List   40-Prefix   41-Zero Touch   42-ACD   45-Local Group   46-Network Group   49-Custom Button   50-Keypad Lock\
#55-Meet-Me Conference   56-Retrieve Park   57-Hoteling   58-ACD Grace   59-Sisp Code   60-Emergency   61-Directory\
\
#0-NA \'a3\'aeOnly for T41/T42/T46)\
#22-XML Group (Not support T20)\
#38-LDAP (Not support T20)\
#46-Network Group (Not support T20)\
#8-SMS (Only support T21/T46/T22/T26/T28)\
#17-URL (Only support T41/T42/T46)\
#49-Custom Button (Only support T20/T22/T26/T28)\
\
###linekey.X.line = \
###linekey.X.value = \
###linekey.X.pickup_value = \
###linekey.X.type = \
###linekey.X.xml_phonebook =\
###linekey.X.label = \
\
###It configures the desired line to apply the key feature.Integer from 1 to 6\
linekey.X.line = \
\
###It configures the value of the line key feature.\
###For example, when setting the key feature to BLF, it configures the number of the monitored user.\
###The default value is blank.\
linekey.X.value = \
\
###It configures the pickup code for BLF feature or conference ID followed by the # sign for Meet-Me conference feature.\
###It only applies to BLF and Meet-Me conference features.\
###The default value is blank.\
linekey.X.pickup_value = \
\
###It configures the key feature for the line key X.\
linekey.X.type = \
\
###It configures the desired local group/XML group/network group for the line key X.\
###It only applies to the Local Group, XML Group and Network Group features.\
###XML Group and Network Group features are not applicable to SIP-T20P IP phones.\
linekey.X.xml_phonebook =\
\
###It configures the label displayed on the LCD screen for each line key.\
###The default value is blank.\
linekey.X.label = \
\
#### Local Contact ####\
local_contact.data.url = \
\
###(Only T46G Model supports the parameter)\
local_contact.data_photo_tar.url =\
\
###(Except T20P Model)\
directory_setting.url =\
\
#### Remote Phonebook(Except T20P Model) ####\
remote_phonebook.data.1.url =   \
remote_phonebook.data.1.name = \
\
## Except T41P/T42G Models ##\
remote_phonebook.display_name = \
\
## It enables or disables the phone to perform a remote phone book search when receiving an incoming call.\
## 0-Disabled,1-Enabled.\
## The default value is 0.\
features.remote_phonebook.enable= \
\
## It configures the interval (in seconds) for the phone to update the data of the remote phone book from the remote phone book server.\
## The default value is 21600.Integer from 3600 to 2592000.\
features.remote_phonebook.flash_time = }