Your phone has a headset socket located under the phone. This is
suitable for the connection of phone headsets that connect via a HIS
headset cable.
• |
If
there are no currently connected call, a call answered or made by
pressing an appearance button is connected either hands free or through
the headset according to the phone's audio path setting. The same applies to dialing a new call. |
• |
If
there is already a connected call to which you are talking through the
headset, answering another call by pressing the appearance button will
answer that call using the headset. |
Using a Headset
To answer a call using a headset:
1. |
To answer a call using the headset, press the HEADSET button. |
To end a headset call:
1. |
To end a headset call, press the HEADSET button. |
• |
If the other party ends the call, the HEADSET button remains active. Press the button to end the headset usage. |
To switch from the headset to the handset:
1. |
To switch from the headset to the handset, simply lift the handset. |
To switch to hands free from the headset:
1. |
To switch to hands free from the headset, press the HEADSET button. |
To switch from the headset to hands free:
1. |
Press the SPEAKER button. See Hand free Speaker Operation. |
To switch to headset from hands free:
1. |
Press the HEADSET button. The button remains lit whilst you have a call connected handsfree. |
To mute the call while on the headset:
1. |
Press the MUTE
button. The button remains lit whilst the call is muted. Note that if
you switch to the handset or handsfree, the mute is automatically
canceled. |
Headset Operation Settings
You can adjust the following headset settings:
While talking via the headset, you can adjust the volume of the incoming call.
1. |
With the call connected on the headset, press the key. |
2. |
Use the + plus and – minus keys to adjust the volume. |
3.The display will return to normal after a few seconds
How to set default audio path headset vs. speakerphone
By default, when you make a call or answer a call without lifting the
handset, the audio is played through the phone's speaker while you
speak via the phone's microphone.
If you have a headset attached, you can change the phone's behavior
so the audio is played through the headset by default rather than the
speaker.
1. |
Press the MENU button. |
2. |
Use the up and down arrow keys to locate the option Call Settings.... |
3. |
Press the Select soft key. |
4. |
Use the up and down arrow keys to locate the option Audio Path. |
5. |
Use the left and right arrow keys or press the Change soft key to change the setting. |
6. |
When completed, press the Done soft key. |
7.Press the Exit soft key to exit the menus.
When using automatic gain control (AGC), the phone tries to maintain a
constant audio level even if the incoming call changes between loud and
quiet.
1. |
Press the MENU button. |
2. |
Use the up and down arrow keys to locate the option Advanced. |
3. |
Press the Select soft key. |
4. |
Use the up and down arrow keys to locate the option Audio. |
5. |
Press the Select soft key. |
• |
Use the up and down arrow keys to switch between the Handset, Headset or Speaker settings for automatic gain control. |
• |
To change a setting, use the left and right arrow keys or press the On/Off soft key. |
6. |
When completed, press the Done soft key. |
7.Press the Exit soft key to exit the menus.