Note, if you need to install the NS0154 on a different LAN Subnet and/or location, such as Shapiro, you will need to pre-program the Primary PBX Address into the NS0154.
To do this you will use the NS Web Maintenance Console Select IP Terminal (I) Mode
Set Switch 7 to ON
The unit will use default 192.168.2.101
You will need to set your laptop to same sub-net such as 192.168.2.99
Follow instructions in attached document.
SR
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article