Grandstream GXP1760W Sonictel KEYPBX Overrides 8/2/2020, SR

These are the suggested overrides for GXP1760W Phone. (many are already in the NDP, so these are more model specific)

P61="125"

P1569="224.0.0.1:10000"

P1570="Page"

P238="0"

P6767="2"

P192="sonictel-prov-files.s3.us-east-2.amazonaws.com/Grandstream-GXP1760W-1-0-1-106"

##########################################################################################

Here is the complete template profile for GXP1760W firmware 1.0.1.106

##########################################################################################

## Configuration Template For GXP1782/1780/1760 Firmware Version 1.0.1.106              ##

##########################################################################################

####################################################################

# Account Settings                                                ##

####################################################################

####################################################################

# Account 1                                                       ##

####################################################################

####################################################################

# Account 1/General Settings

####################################################################

# Account Active. 0 - No, 1 - Yes. Default is 1

# Number: 0, 1

# Mandatory

P271 = 1

# Account Name

# String

P270 =

# SIP Server

# String

P47 =

# Secondary SIP Server

# String

P2312 =

# Outbound Proxy

# String

P48 =

# Backup Outbound Proxy

# String

P2333 = 

# BLF Server

# String

P2375 = 

# SIP User ID

# String

P35 =

# Authenticate ID

# String

P36 =

# Authenticate Password

# String

P34 =

# Name

# String

P3 =

# Voice Mail Access Number

# String

P33 = 5001 (NDP)

# Account Display

# Number: 0 - User Name, 1 - User Identification. Default is 0.

# Mandatory

P2380 = 0

###############################################################

# Account 1/Network Settings

###############################################################

# DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV, 3 - Use Configured IP. Default is 0

# Number: 0, 1, 2, 3

# Mandatory

P103 = 0

# Primary IP. Maximum 15 characters

# String

P2308 =

# Backup IP 1

# String

P2309 =

# Backup IP 2

# String

P2310 =

# NAT Traversal. 0 - No, 1 - STUN, 2 - keep alive, 3 - UPnP, 4 - Auto, 5 - VPN. Default is 0.

# Number: 0, 1, 2, 3, 4, 5

# Mandatory

P52 = 0

# Proxy-Require (A SIP extension to enable firewall penetration). Max length is 64 characters

# String

P197 =

# Use SBC. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P26090 = 0

###############################################################

# Account 1/SIP Settings/Basic Settings

###############################################################

# TEL URI. 0 - Disabled, 1 - User=Phone, 2 - Enabled. Default is 0

# Number: 0, 1, 2

# Mandatory

P63 = 0

# SIP Registration. 0 - No, 1 - Yes. Default is 1

# Number: 0, 1

# Mandatory

P31 = 1

# Unregister On Reboot. 0 - No, 1 - Yes, 2 - Instance. Default is 0

# Number: 0, 1

# Mandatory

P81 = 0

# Register Expiration (in minutes). Default is 60. Max about 45 days

# Number: 1 - 64800

# Mandatory

P32 = 1 (NDP)

# Subscribe Expiration. Default is 60. 

# Number: 1-64800 

# Mandatory

P26051 = 10 (NDP)

# Register Before Expiration (in seconds). Default is 0 second

# Number: 0 - 64800

# Mandatory

P2330 = 0

# Enable OPTIONS Keep Alive. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2397 = 0

# OPTIONS Keep Alive Interval. Default is 30.

# Number

# Mandatory

P2398 = 30

# OPTIONS Keep Alive Max Lost. Default is 3.

# Number

# Mandatory

P2399 = 3

# Local SIP Port. Default is 5060

# Number

# Mandatory

P40 = 5060

# SIP Registration Failure Retry Wait Time (in seconds). Default is 20

# Number: 1 - 3600

# Mandatory

P138 = 20

# SIP T1 Timeout. RFC 3261 T1 value (RTT estimate)

# 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec. Default is 50

# Number: 50, 100, 200

# Mandatory    

P209 = 50

# SIP T2 Timeout. RFC 3261 T2 value. The maximum retransmit interval for non-INVITE requests and INVITE responses

# 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default is 400

# Number: 200, 400, 800

# Mandatory

P250 = 400

# SIP Transport. 0 - UDP, 1 - TCP, 2 - TLS/TCP. Default is 0

# Number: 0, 1, 2

# Mandatory

P130 = 0

# SIP URI Scheme when using TLS. 0 - sip, 1 - sips. Default is 1

# Number: 0, 1

# Mandatory

P2329 = 1

# Use Actual Ephemeral Port in Contact with TCP/TLS. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2331 = 0

# Outbound Proxy Mode. 0 - in route, 1 - not in route, 2 - always send to. Default is 0

# Number: 0, 1, 2

# Mandatory

P2305 = 0

# Support SIP Instance ID. 0 - No, 1 - Yes. Default is 1

# Number: 0, 1

# Mandatory

P288 = 1

# SUBSCRIBE for MWI. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P99 = 0

# SUBSCRIBE for Registration. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2319 = 0

# Enable 100rel. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P272 = 0

# Callee ID Display. 0 - Auto, 1 - Disabled, 2 - To Header. Default is 0

# Number: 0, 1, 2

# Mandatory

P26025 = 0

# Caller ID Display. 0 - Auto, 1 - Disabled, 2 - From Header. Default is 0

# Number: 0, 1, 2

# Mandatory

P2324 = 0

# Ignore Alert-Info header

# 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P26018 = 0

# Add Auth Header On Initial REGISTER. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2359 = 0

###############################################################

# Account 1/SIP Settings/Custom SIP Headers

###############################################################

# Use Privacy Header

# 0 - Default, 1 - No, 2 - Yes. Default is 0

# Number: 0, 1, 2

# Mandatory

P2338 = 0

# Use P-Preferred-Identity Header

# 0 - Default, 1 - No, 2 - Yes. Default is 0

# Number: 0, 1, 2

# Mandatory

P2339 = 0

# Use X-Grandstream-PBX Header. Default is 1.

# Number 0, 1

# Mandatory

P26054 = 1

# Use P-Access-Network-Info Header. 0 - No, 1 - Yes. Default is 1.

# Number 0, 1

# Mandatory

P26058 = 1

# Use P-Emergency-Info Header. 0 - No, 1 - Yes. Default is 1.

# Number 0, 1

# Mandatory

P26059 = 1

# Use MAC Header

# Number: 0 - No, 1 - Yes. Default is 0.

# Mandatory

P26061 = 0

###############################################################

# Account 1/SIP Settings/Advanced Features

###############################################################

# Line-Seize Timeout (in seconds). Default is 15

# Number: 15 - 60

# Mandatory

P2313 = 15

# Eventlist BLF URI

# String

P134 =

# Auto Provision Eventlist BLFs. 0-Disabled, 1-Enabled. Default is 0

# Number:0,1

# Mandatory

P2389 = 0

# Conference URI

# String

P2318 =

# Music On Hold URI

# String

P2350 =

# Force BLF Call-pickup by prefix. 0 - Disable, 1 - Enable. Default is 0

# Number: 0, 1

# Mandatory

P6752 = 0

# BLF Call-pickup Prefix. Default is **

# String

# Mandatory

P1347 = *35 (NDP)

# Call Pickup Barge-In Code

# String

P26046 = 

# PUBLISH for Presence. 0 - Disabled, 1 - Enabled. Default is 0

# Number: 0, 1

# Mandatory

P188 = 0

# Omit charset=UTF-8 in MESSAGE. 0 - Disabled, 1 - Enabled. Default is 0

# Number: 0, 1

# Mandatory

P2355 = 0

# Special Feature. 100 - Standard, 101 - Nortel MCS, 102- Broadsoft, 108 - CBCOM, 

# 109 - RNK, 110 - Sylantro, 117 - Huawei IMS, 119 - Phonepower

# Default is 100

# Number: 100, 101, 102, 108, 109, 110, 117, 119

# Mandatory

P198 = 100

# Broadsoft

# Broadsoft Call Center. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2341 = 0

# Hoteling Event. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2342 = 0

# Call Center Status. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2343 = 0

# Feature Key Synchronization. 0 - Disabled, 1 - Enabled. Default is 0

# Number: 0, 1

# Mandatory

P2325 = 0 (We should test this feature)

# Broadsoft Call Park. 0 - Disabled, 1 - Enabled. Default is 0

# Number: 0, 1

# Mandatory

P2388 = 0

###############################################################

# Account 1/SIP Settings/Session Timer

###############################################################

# Enable Session Timer. 0 - No, 1 - Yes. Default is 1

# Number: 0, 1

# Mandatory

P2395 = 1

# Session Expiration (in seconds). Default is 180

# Number: 90 - 64800

# Mandatory

P260 = 180

# Minimum SE (in seconds). Default is 90. This value must be lower than or equal to P260

# Number: 90 - 64800

# Mandatory

P261 = 90

# Caller Request Timer (Request for timer when calling). 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P262 = 0

# Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one)

# 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P263 = 0

# Force Timer (Still use timer when remote party does not support timer). 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P264 = 0

# UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS. Default is 0

# Number: 0, 1, 2

# Mandatory

P266 = 0

# UAS Specify Refresher. 1 - UAC, 2 - UAS. Default is 1

# Number: 1, 2

# Mandatory

P267 = 1

# Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE).

# 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P265 = 0

###############################################################

# Account 1/SIP Settings/Security Settings

###############################################################

# Check Domain Certificates. When set to Yes/Enabled, domain certificate will be checked as defined in RFC5922

# 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2311 = 0

# Validate Certification Chain. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2367 = 0

# Validate Incoming Messages. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2306 = 0

# Check SIP User ID for incoming INVITE. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P258 = 0

# Accept Incoming SIP from Proxy Only. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2347 = 0

# Authenticate Incoming INVITE. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2346 = 0

###############################################################

# Account 1/Audio Settings

###############################################################

# Preferred Vocoder

# 0 - PCMU, 2 - G.726-32, 8 - PCMA, 9 - G.722, 18 - G.729A/B, 4 - G.723.1, 98 - iLBC, 125 - OPUS

# choice 1. Default is 0

# Number: 0, 2, 4, 8, 9, 18, 98, 125

# Mandatory

P57 = 0 (NDP)

# choice 2. Default is 8

# Number: 0, 2, 4, 8, 9, 18, 98, 125 

# Mandatory

P58 = 18 (NDP)

# choice 3. Default is 4

# Number: 0, 2, 4, 8, 9, 18, 98, 125 

# Mandatory

P59 = 9 (NDP)

# choice 4. Default is 18

# Number: 0, 2, 4, 8, 9, 18, 98, 125

# Mandatory

P60 = 4 (NDP)

# choice 5. Default is 9

# Number: 0, 2, 4, 8, 9, 18, 98, 125 

# Mandatory

P61 = 125 in (the NDP shows 123) which is correct for GXP21xx phones but different for this model gxp1730W which uses 125 for OPUS

# choice 6. Default is 98

# Number: 0, 2, 4, 8, 9, 18, 98, 125 

# Mandatory

P62 = 98

# choice 7. Default is 2

# Number: 0, 2, 4, 8, 9, 18, 98, 125 

# Mandatory

P46 = 2

# choice 8. Default is 125

# Number: 0, 2, 4, 8, 9, 18, 98, 125 

# Mandatory

P98 = 125

# Use First Matching Vocoder in 200OK SDP. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2348 = 1 (NDP)

# Disable Multiple m line in SDP

# 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P137 = 0

# SRTP Mode. 0 - Disabled, 1 - Enabled but not forced, 2 - Enabled and forced, 3 - Optional. Default is 0

# Number: 0, 1, 2, 3

# Mandatory

P183 = 0

# Crypto Life Time

# 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2363 = 0

# Symmetric RTP. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P291 = 0

# Silence Suppression. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P50 = 0

# Jitter Buffer Type. 0 - Fixed, 1 - Adaptive. Default is 1

# Number: 0, 1

# Mandatory

P133 = 1

# Jitter Buffer Length. 0 - 100ms, 1 - 200ms, 2 - 300ms, 3 - 400ms, 4 - 500ms, 5 - 600ms, 6 - 700ms, 7 - 800ms

# Default is 2

# Number: 0, 1, 2, 3, 4, 5, 6, 7

# Mandatory

P132 = 2

# Voice Frames per TX (up to 10/20/32/64 frames for G711/G726/G723/other codecs respectively). Default is 2

# Number: 1 - 64

# Mandatory

P37 = 2

# G723 Rate. 0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate. Default is 1

# Number: 0, 1

# Mandatory

P49 = 1

# G.726-32 Packing Mode. 0 - ITU, 1 - IETF. Default is 0

# Number: 0, 1

# Mandatory

P2323 = 0

# iLBC Frame Size. 0 - 20ms, 1 - 30ms. Default is 1

# Number: 0, 1

# Mandatory

P97 = 1

# iLBC Payload Type. Default is 97

# Number: 96 - 127

# Mandatory

P96 = 97

# OPUS Payload Type. Default is 123

# Number: 96 - 127

# Mandatory

P2385 = 123

# DTMF Payload Type. Default is 101

# Number: 96 - 127

# Mandatory

P79 = 101

# Send DTMF: In-audio. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2301 = 0

# Send DTMF: Via RTP (RFC2833). 0 - No, 1 - Yes. Default is 1

# Number: 0, 1

# Mandatory

P2302 = 1

# Send DTMF: Via SIP INFO. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2303 = 0

###############################################################

# Account 1/Call Settings

###############################################################

# Early Dial (use "Yes" only if proxy supports 484 response). 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P29 = 0

# Dial Plan Prefix

# String 

P66 =

# Dial Plan. Default value is { x+ | \+x+ | *x+ | *xx*x+ }

# String

# Mandatory

P290 = { x+ | \+x+ | *x+ | *xx*x+ }

# Bypass Dial Plan

# String: contact,incoming,outgoing,dialing,mpk,api. Default is mpk

P2382 = mpk

# Call Log. 0 - Log All Calls, 1 - Log Incoming/Outgoing only (missed calls NOT recorded), 2 - Disable Call Log. Default is 0

# Number: 0, 1, 2

# Mandatory

P182 = 0

# Send Anonymous (caller ID will be blocked if set to Yes). 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P65 = 0

# Anonymous Call Rejection. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P129 = 0

# Auto Answer. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P90 = 0

# Allow Auto Answer by Call-Info. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P298 = 0

# Custom Call-Info for Auto Answer.

# String

P2356 = Internal (NDP)

# Refer-To Use Target Contact. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P135 = 0

# Transfer on Conference HangUp. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2304 = 0

# Disable Recovery on Blind Transfer. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2384 = 0

# No Key Entry Timeout (in seconds). Default is 4

# Number: 1 - 15

# Mandatory

P85 = 4

# Use # as Dial Key. 0 - No, 1 - Yes. Default is 1

# Number: 0, 1

# Mandatory

P72 = 1

# On Hold Reminder Tone. 0 - Disabled, 1 - Enabled. Default is 0.

# Number: 0, 1

# Mandatory

P26006 = 0

#Ringtone

# Account Ring Tone. 

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P104 = 0    

# Matching Incoming Caller ID. Matching Rule 1

# String

P1488 = 

# Matching Rule 1 Distinctive Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P1489 = 0

# Matching Incoming Caller ID. Matching Rule 2

# String

P1490 = 

# Matching Rule 2 Distinctive Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P1491 = 0

# Matching Incoming Caller ID. Matching Rule 3

# String

P1492 =

# Matching Rule 3 Distinctive Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P1493 = 0

# Matching Incoming Caller ID. Matching Rule 4

# String

P6716 = 

# Matching Rule 4 Distinctive Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P6717 = 0

# Matching Incoming Caller ID. Matching Rule 5

# String

P6718 = 

# Matching Rule 5 Distinctive Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P6719 = 0

# Matching Incoming Caller ID. Matching Rule 6

# String

P6720 = 

# Matching Rule 6 Distinctive Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P6721 = 0

# Matching Incoming Caller ID. Matching Rule 7

# String

P26064 = 

# Matching Rule 7 Distinctive Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P26065 = 0

# Matching Incoming Caller ID. Matching Rule 8

# String

P26066 = 

# Matching Rule 8 Distinctive Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P26067 = 0

# Matching Incoming Caller ID. Matching Rule 9

# String

P26068 = 

# Matching Rule 9 Distinctive Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P26069 = 0

# Matching Incoming Caller ID. Matching Rule 10

# String

P26096 = 

# Matching Rule 10 Distinctive Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P26097 = 0

# Ring Timeout (in seconds). Default is 60

# Number: 30 - 3600

# Mandatory

P1328 = 60

###############################################################

# Account 1/Feature Codes

###############################################################

# Enable Local Call Features.  0 - No, 1 - Yes. Default is 1

# Number: 0, 1 

# Mandatory

P191 = 0 (NDP)

# Do Not Disturb (DND) - On

# String

P2344 = 

# Do Not Disturb (DND) - Off

# String

P2345 =

# Delayed Call Forward Wait Time (in seconds). Default is 20

# Number: 1 - 120

# Mandatory

P139 = 20

####################################################################

# Account 2

####################################################################

###############################################################

# Account 2/General Settings

###############################################################

# Account Active. 0 - No, 1 - Yes. Default is 1

# Number: 0, 1

# Mandatory

P401 = 1

# Account Name

# String

P417 = 

# SIP Server

# String

P402 = 

# Secondary SIP Server

# String

P2412 =

# Outbound Proxy

# String

P403 = 

# Backup Outbound Proxy

# String

P2433 = 

# BLF Server

# String

P2475 =

# SIP User ID

# String

P404 = 

# Authenticate ID

# String

P405 = 

# Authenticate password

# String

P406 = 

# Name

# String

P407 =

# Voice Mail UserID

# String

P426 =

# Account Display

# Number: 0 - User Name, 1 - User Identification. Default is 0.

# Mandatory

P2480 = 0

###############################################################

# Account 2/Network Settings

###############################################################

# DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV, 3 - Use Configured IP. Default is 0

# Number: 0, 1, 2, 3

# Mandatory

P408 = 0

# Primary IP. Maximum 15 characters

# String

P2408 = 

# Backup IP 1

# String

P2409 = 

# Backup IP 2

# String

P2410 =

# NAT Traversal. 0 - No, 1 - STUN, 2 - keep alive, 3 - UPnP, 4 - Auto, 5 - VPN. Default is 0

# Number: 0, 1, 2, 3, 4, 5

# Mandatory

P414 = 0

# Proxy-Require (A SIP extension to enable firewall penetration). Max length is 64 characters

# String

P418 =

# Use SBC. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P26190 = 0

###############################################################

# Account 2/SIP Settings/Basic Settings

###############################################################

# TEL URI. 0 - Disabled, 1 - User=Phone, 2 - Enabled. Default is 0

# Number: 0, 1, 2

# Mandatory

P409 = 0

# SIP Registration. 0 - No, 1 - Yes. Default is 1

# Number: 0, 1

# Mandatory

P410 = 1

# Unregister On Reboot. 0 - No, 1 - Yes, 2 - Instance. Default is 0

# Number: 0, 1

# Mandatory

P411 = 0

# Register Expiration (in minutes). Default is 60. Max is 45 days

# Number: 1 - 64800

# Mandatory

P412 = 1 (NDP)

# Subscribe Expiration. Default is 60. 

# Number: 1-64800 

# Mandatory

P26151 = 10 (NDP)

# Reregister before Expiration (in seconds). Default is 0

# Number: 0 - 64800

# Mandatory

P2430 = 0

# Enable OPTIONS Keep Alive. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2497 = 0

# OPTIONS Keep Alive Interval. Default is 30.

# Number

# Mandatory

P2498 = 30

# OPTIONS Keep Alive Max Lost. Default is 3.

# Number

# Mandatory

P2499 = 3

# Local SIP port. Default is 5062

# Number

# Mandatory

P413 = 5062

# SIP Registration Failure Retry Wait Time (in seconds). Default is 20

# Number: 1 - 3600

# Mandatory

P471 = 20

# SIP T1 Timeout. RFC 3261 T1 value (RTT estimate)

# 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec. Default is 100

# Number: 50, 100, 200

# Mandatory

P440 = 50

# SIP T2 Timeout. RFC 3261 T2 value. The maximum retransmit interval for non-INVITE requests and INVITE responses

# 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default is 400

# Number: 200, 400, 800

# Mandatory

P441 = 400

# SIP Transport. 0 - UDP, 1 - TCP, 2 - TCP/TLS. Default is 0

# Number: 0, 1, 2

# Mandatory

P448 = 0

# SIP URI Scheme when using TLS. 0 - sip, 1 - sips. Default is 1

# Number: 0, 1

# Mandatory

P2429 = 1

# Use Actual Ephemeral Port in Contact with TCP/TLS. 0 - No, 1- Yes. Default is 0

# Number: 0, 1

# Mandatory

P2431 = 0

# Outbound Proxy Mode. 0 - in route, 1 - not in route, 2 - always send to. Default is 0

# Number: 0, 1, 2

# Mandatory

P2405 = 0

# Support SIP Instance ID. 0 - No, 1 - Yes. Default is 1

# Number: 0, 1

# Mandatory

P489 = 1

# SUBSCRIBE for MWI (Whether or not send SUBSCRIBE for Message Waiting Indication). 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P415 = 0

# SUBSCRIBE for Registration. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2419 = 0

# Enable 100rel. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P435 = 0

# Callee ID Display. 0 - Auto, 1 - Disabled, 2 - To Header. Default is 0

# Number: 0, 1, 2

# Mandatory

P26125 = 0

# Caller ID Display. 0 - Auto, 1 - Disabled, 2 - From Header. Default is 0

# Number: 0, 1, 2

# Mandatory

P2424 = 0

# Ignore Alert-Info header

# 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P26118 = 0

# Add Auth Header On Initial REGISTER. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2459 = 0

###############################################################

# Account 2/SIP Settings/Custom SIP Headers

###############################################################

# Use Privacy Header

# 0 - Default, 1 - No, 2 - Yes. Default is 0

# Number: 0, 1, 2

# Mandatory

P2438 = 0

# Use P-Preferred-Identity Header

# 0 - Default, 1 - No, 2 - Yes. Default is 0

# Number: 0, 1, 2

# Mandatory

P2439 = 0

# Use X-Grandstream-PBX Header. Default is 1.

# Number 0, 1

# Mandatory

P26154 = 1

# Use P-Access-Network-Info Header. 0 - No, 1 - Yes. Default is 1.

# Number 0, 1

# Mandatory

P26158 = 1

# Use P-Emergency-Info Header. 0 - No, 1 - Yes. Default is 1.

# Number 0, 1

# Mandatory

P26159 = 1

# Use MAC Header

# Number: 0 - No, 1 - Yes. Default is 0.

# Mandatory

P26161 = 0

###############################################################

# Account 2/SIP Settings/Advanced Features

###############################################################

# Line-Seize Timeout (in seconds). Default is 15

# Number: 15 - 60

# Mandatory

P2413 = 15

# Eventlist BLF URI

# String

P444 = 

#Auto Provision Eventlist BLFs. 0-Disabled, 1-Enabled. Default is 0

#Number:0,1

#Mandatory

P2489 = 0

# Conference URI

# String

P2418 =

# Music On Hold URI

# String

P2450 =

# Force BLF Call-pickup by prefix. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P6753 = 0

# BLF Call-pickup Prefix. Default is **

# String

# Mandatory

P481 = **

# Call Pickup Barge-In Code

# String

P26146 = 

# PUBLISH for Presence. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P488 = 0

# Omit charset=UTF-8 in MESSAGE. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2455 = 0

# Special Feature. 100 - Standard, 101 - Nortel MCS, 102- Broadsoft, 108 - CBCOM, 109 - RNK, 110 - Sylantro, 117 - Huawei IMS

# Number: 100, 101, 102, 108, 109, 110, 117. Default is 100

# Mandatory

P424 = 100

# Broadsoft

# Broadsoft Call Center. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2441 = 0

# Hoteling Event. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2442 = 0

# Call Center Status. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2443 = 0

# Feature Key Synchronization. 0 - Disabled, 1 - Enabled. Default is 0.

# Number: 0, 1

# Mandatory

P2425 = 0

# Broadsoft Call Park. 0 - Disabled, 1 - Enabled. Default is 0.

# Number: 0, 1

# Mandatory

P2488 = 0

###############################################################

# Account 2/SIP Settings/Session Timer

###############################################################

# Enable Session Timer. 0 - No, 1 - Yes. Default is 1

# Number: 0, 1

# Mandatory

P2495 = 1

# Session Expiration (in seconds). Default is 180

# Number: 90 - 64800

# Mandatory

P434 = 180

# Minimum SE (in seconds). Default is 90. This value must be lower than or equal to P434

# Number: 90 - 64800

# Mandatory

P427 = 90

# Caller Request Timer (Request for timer when calling). 0 - No, 1 - Yes

# Number: 0, 1

# Mandatory

P428 = 0

# Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one)

# 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory 

P429 = 0

# Force Timer (Still use timer when remote party does not support timer). 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P430 = 0    

# UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS. Default is 0

# Number: 0, 1, 2

# Mandatory

P432 = 0

# UAS Specify Refresher. 1 - UAC, 2 - UAS. Default is 1

# Number: 1, 2

# Mandatory

P433 = 1

# Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE)

# 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P431 = 0

###############################################################

# Account 2/SIP Settings/Security Settings

###############################################################

# Check Domain Certificates. 0 - No, 1 - Yes. When set to Yes/Enabled, the domain certificate will be checked as defined in RFC5922

# 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2411 = 0

# Validate Certification Chain. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2467 = 0

# Validate Incoming Messages. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2406 = 0

# Check SIP User ID for incoming INVITE. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P449 = 0

# Accept Incoming SIP from Proxy Only. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2447 = 0

# Authenticate Incoming INVITE. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2446 = 0

###############################################################

# Account 2/Audio Settings

###############################################################

# Preferred Vocoder

# 0 - PCMU, 2 - G.726-32, 8 - PCMA, 9 - G.722, 18 - G.729A/B, 4 - G.723.1, 98 - iLBC, 125 - OPUS

# choice 1. Default is 0

# Number: 0, 2, 4, 8, 9, 18, 98, 125 

# Mandatory

P451 = 0

# choice 2. Default is 8

# Number: 0, 2, 4, 8, 9, 18, 98, 125 

# Mandatory

P452 = 8

# choice 3. Default is 4

# Number: 0, 2, 4, 8, 9, 18, 98, 125 

# Mandatory

P453 = 4

# choice 4. Default is 18

# Number: 0, 2, 4, 8, 9, 18, 98, 125 

# Mandatory

P454 = 18

# choice 5. Default is 9

# Number: 0, 2, 4, 8, 9, 18, 98, 125 

# Mandatory

P455 = 9

# choice 6. Default is 98

# Number: 0, 2, 4, 8, 9, 18, 98, 125 

# Mandatory

P456 = 98

# choice 7. Default is 2

# Number: 0, 2, 4, 8, 9, 18, 98, 125 

# Mandatory

P457 = 2

# choice 8. Default is 125

# Number: 0, 2, 4, 8, 9, 18, 98, 125 

# Mandatory

P458 = 125

# Use First Matching Vocoder in 200OK SDP. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2448 = 0

# Disable Multiple m line in SDP

# 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P487 = 0

# SRTP Mode

# 0 - Disabled, 1 - Enabled but not forced, 2 - Enabled and forced, 3 - Optional. Default is 0

# Number: 0, 1, 2, 3

# Mandatory

P443 = 0

#Crypto Life Time

#0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2463 = 0

# Symmetric RTP. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P460 = 0

# Silence Suppression 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P485 = 0

# Jitter Buffer Type. 0 - Fixed, 1 - Adaptive. Default is 1

# Number: 0, 1

# Mandatory

P498 = 1

# Jitter Buffer Length. 

# 0 - 100ms, 1 - 200ms, 2 - 300ms, 3 - 400ms, 4 - 500ms, 5 - 600ms, 6 - 700ms, 7 - 800ms. Default is 2

# Number: 0, 1, 2, 3, 4, 5, 6, 7

# Mandatory

P497 = 2

# Voice Frames per TX (up to 10/20/32/64 frames for G711/G726/G723/other codecs respectively). Default is 2

# Number: 1 - 64

# Mandatory

P486 = 2

# G723 Rate. 0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate. Default is 1

# Number: 0, 1

# Mandatory

P493 = 1

# G.726-32 Packing Mode. 0 - ITU, 1 - IETF. default is 0

# Number: 0, 1

# Mandatory

P2423 = 0

# iLBC Frame Size. 0 - 20ms, 1 - 30ms. Default is 1

# Number: 0, 1

# Mandatory

P495 = 1

# iLBC Payload Type. Default is 97

# Number: 96 - 127

# Mandatory

P494 = 97

# OPUS Payload Type. Default is 123

# Number: 96 - 127

# Mandatory

P2485 = 123

# DTMF Payload Type. Default is 101

# Number: 96 - 127

# Mandatory

P496 = 101

# Send DTMF: In-audio. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2401 = 0

# Send DTMF: Via RTP (RFC2833). 0 - No, 1 - Yes. Default is 1

# Number: 0, 1

# Mandatory

P2402 = 1

# Send DTMF: Via SIP INFO. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2403 = 0

###############################################################

# Account 2/Call Settings

###############################################################

# Early Dial (use "Yes" only if proxy supports 484 response). 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P422 = 0

# Dial Plan Prefix

# String

P419 = 

# Dial Plan. Default is { x+ | \+x+ | *x+ | *xx*x+ }

# String

# Mandatory

P459= { x+ | \+x+ | *x+ | *xx*x+ }

# Bypass Dial Plan

# String: contact,incoming,outgoing,dialing,mpk,api. Default is mpk

P2482 = mpk

# Call Log. 0 - Log All Calls, 1 - Log Incoming/Outgoing only (missed calls NOT recorded), 2 - Disable Call Log. Default is 0

# Number: 0, 1, 2

# Mandatory

P442 = 0

# Send Anonymous (caller ID will be blocked if set to Yes). 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P421 = 0

# Anonymous Call Rejection. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P446 = 0

# Auto Answer. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P425 = 0

# Allow Auto Answer by Call-Info. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P438 = 0

# Custom Call-Info for Auto Answer.

# String

P2456 =

# Refer-To Use Target Contact. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P469 = 0

# Transfer on conference HangUp. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2404 = 0

# Disable Recovery on Blind Transfer. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2484 = 0

# No Key Entry Timeout. Default is 4

# Number: 1 - 15

# Mandatory

P491 = 4

# Use # as Dial Key. 0 - No, 1 - Yes. Default is 1

# Number: 0, 1

# Mandatory

P492 = 1

# On Hold Reminder Tone. 0 - Disabled, 1 - Enabled. Default is 0.

# Number: 0, 1

# Mandatory

P26106 = 0

# Ringtone

# Account Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory 

P423 = 0

# Matching Incoming Caller ID. Matching Rule 1

# String

P1494 = 

# Matching Rule 1 Distinctive Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P1495 = 0

# Matching Incoming Caller ID. Matching Rule 2.

# String

P1496 = 

# Matching Rule 2 Distinctive Ringtone.

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P1497 = 0

# Matching Incoming Caller ID. Matching Rule 3.

# String

P1498 =

# Matching Rule 3 Distinctive Ringtone.

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P1499 = 0

# Matching Incoming Caller ID. Matching Rule 4

# String

P6722 = 

# Matching Rule 4 Distinctive Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P6723 = 0

# Matching Incoming Caller ID. Matching Rule 5

# String

P6724 = 

# Matching Rule 5 Distinctive Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P6725 = 0

# Matching Incoming Caller ID. Matching Rule 6

# String

P6726 = 

# Matching Rule 6 Distinctive Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P6727 = 0

# Matching Incoming Caller ID. Matching Rule 7

# String

P26164 = 

# Matching Rule 7 Distinctive Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P26165 = 0

# Matching Incoming Caller ID. Matching Rule 8

# String

P26166 = 

# Matching Rule 8 Distinctive Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P26167= 0

# Matching Incoming Caller ID. Matching Rule 9

# String

P26168 = 

# Matching Rule 9 Distinctive Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P26169 = 0

# Matching Incoming Caller ID. Matching Rule 10

# String

P26196 = 

# Matching Rule 10 Distinctive Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P26197 = 0

# Ring Timeout (in seconds) Default is 60

# Number: 30 - 3600

# Mandatory

P476 = 60

###############################################################

# Account 2/Feature Codes

###############################################################

# Enable Local Call Features.  0 - No, 1 - Yes. Default is 1

# Number: 0, 1 

# Mandatory

P420 = 1

# Do Not Disturb (DND) - On

# String

P2444 = 

# Do Not Disturb (DND) - Off

# String

P2445 =

# Delayed Call Forward Wait Time (in seconds). Default is 20

# Number: 1 - 120

# Mandatory

P470 = 20

####################################################################

# Account 3

####################################################################

###############################################################

# Account 3/General Settings

###############################################################

# Account Active. 0 - No, 1 - Yes. Default is 1

# Number: 0, 1

# Mandatory

P501 = 1

# Account Name

# String

P517 = 

# SIP Server

# String

P502 = 

# Secondary SIP Server

# String

P2512 =

# Outbound Proxy

# String

P503 =

# Backup Outbound Proxy

# String

P2533 = 

# BLF Server

# String

P2575 =

# SIP User ID

# String

P504 =

# Authenticate ID

# String

P505 = 

# Authenticate Password

# String

P506 = 

# Name

# String

P507 =

# Voice Mail UserID

# String

P526 =

# Account Display

# Number: 0 - User Name, 1 - User Identification. Default is 0.

# Mandatory

P2580 = 0

###############################################################

# Account 3/Network Settings

###############################################################

# DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV, 3 - Use Configured IP. Default is 0 

# Number: 0, 1, 2, 3

# Mandatory

P508 = 0

# Primary IP. Maximum 15 characters

# String

P2508 = 

# Backup IP 1

# String

P2509 = 

# Backup IP 2

# String

P2510 =

# NAT Traversal. 0 - No, 1 - STUN, 2 - keep alive, 3 - UPnP, 4 - Auto, 5 - VPN. Default is 0

# Number: 0, 1, 2, 3, 4, 5

# Mandatory

P514 = 0

# Proxy-Require (A SIP extension to enable firewall penetration). Max length is 64 characters

# String

P518 =

# Use SBC. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P26290 = 0

###############################################################

# Account 3/SIP Settings/Basic Settings

###############################################################

# TEL URI. 0 - Disabled, 1 - User=Phone, 2 - Enabled. Default is 0

# Number: 0, 1, 2

# Mandatory

P509 = 0

# SIP Registration. 0 - No, 1 - Yes. Default is 1

# Number: 0, 1

# Mandatory

P510 = 1

# Unregister On Reboot. 0 - No, 1 - Yes, 2 - Instance. Default is 0

# Number: 0, 1

# Mandatory

P511 = 0

# Register Expiration (in minutes). Default is 60. Max is 45 days

# Number: 1 - 64800

# Mandatory

P512 = 60

# Subscribe Expiration. Default is 60. 

# Number: 1-64800 

# Mandatory

P26251 = 60

# Reregister before Expiration (in seconds). Default is 0 second

# Number: 0 - 64800

# Mandatory

P2530 = 0

# Enable OPTIONS Keep Alive. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2597 = 0

# OPTIONS Keep Alive Interval. Default is 30.

# Number

# Mandatory

P2598 = 30

# OPTIONS Keep Alive Max Lost. Default is 3.

# Number

# Mandatory

P2599 = 3

# Local SIP Port. Default is 5064

# Number

# Mandatory

P513 = 5064

# SIP Registration Failure Retry Wait Time (in seconds). Default is 20

# Number: 1 - 3600

# Mandatory

P571 = 20

# SIP T1 Timeout. RFC 3261 T1 value (RTT estimate)

# 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec. Default is 100

# Number: 50, 100, 200

# Mandatory

P540 = 50

# SIP T2 Timeout. RFC 3261 T2 value. The maximum retransmit interval for non-INVITE requests and INVITE responses.

# 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default is 400

# Number: 200, 400, 800

# Mandatory

P541 = 400

# SIP Transport. 0 - UDP, 1 - TCP. 2- TCP/TLS. Default is 0

# Number: 0, 1, 2

# Mandatory

P548 = 0

# SIP URI Scheme When Using TLS. 0 - sip, 1 - sips. Default is 1

# Number: 0, 1

# Mandatory

P2529 = 1

# Use Actual Ephemeral Port in Contact with TCP/TLS. 0 - No, 1- Yes. Default is 0

# Number: 0, 1

# Mandatory

P2531 = 0

# Outbound Proxy Mode. 0 - in route, 1 - not in route, 2 - always send to. Default is 0

# Number: 0, 1, 2

# Mandatory

P2505 = 0

# Support SIP Instace ID. 0 - No, 1 - Yes. Default is 1

# Number: 0, 1

# Mandatory

P589 = 1

# SUBSCRIBE for MWI (Whether or not send SUBSCRIBE for Message Waiting Indication). 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P515 = 0

# SUBSCRIBE for Registration. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2519 = 0

# Enable 100rel. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P535 = 0

# Callee ID Display. 0 - Auto, 1 - Disabled, 2 - To Header. Default is 0

# Number: 0, 1, 2

# Mandatory

P26225= 0

# Caller ID Display. 0 - Auto, 1 - Disabled, 2 - From Header. Default is 0

# Number: 0, 1, 2

# Mandatory

P2524 = 0

# Ignore Alert-Info header

# 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P26218 = 0

# Add Auth Header On Initial REGISTER. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2559 = 0

###############################################################

# Account 3/SIP Settings/Custom SIP Headers

###############################################################

# Use Privacy Header

# 0 - Default, 1 - No, 2 - Yes. Default is 0

# Number: 0, 1, 2

# Mandatory

P2538 = 0

# Use P-Preferred-Identity Header

# 0 - Default, 1 - No, 2 - Yes. Default is 0

# Number: 0, 1, 2

# Mandatory

P2539 = 0

# Use X-Grandstream-PBX Header. Default is 1.

# Number 0, 1

# Mandatory

P26254 = 1

# Use P-Access-Network-Info Header. 0 - No, 1 - Yes. Default is 1.

# Number 0, 1

# Mandatory

P26258 = 1

# Use P-Emergency-Info Header. 0 - No, 1 - Yes. Default is 1.

# Number 0, 1

# Mandatory

P26259 = 1

# Use MAC Header

# Number: 0 - No, 1 - Yes. Default is 0.

# Mandatory

P26261 = 0

##########################################

# Account 3/SIP Settings/Advanced Features

##########################################

# Line-Seize Timeout (in seconds). Default is 15

# Number: 15 - 60

# Mandatory

P2513 = 15

# Eventlist BLF URI

# String

P544 = 

# Auto Provision Eventlist BLFs. 0-Disabled, 1-Enabled. Default is 0

# Number:0,1

# Mandatory

P2589 = 0

# Conference URI

# String

P2518 =

# Music On Hold URI

# String

P2550 =

# Force BLF Call-pickup by prefix. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P6754 = 0

# BLF Call-pickup Prefix. Default is **

# String

# Mandatory

P581 = **

# Call Pickup Barge-In Code

# String

P26246 = 

# PUBLISH for Presence. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P588 = 0

# Omit charset=UTF-8 in MESSAGE. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2555 = 0

# Special Feature. 100 - Standard, 101 - Nortel MCS, 102- Broadsoft, 108 - CBCOM, 109 - RNK, 110 - Sylantro, 117 - Huawei IMS. Default is 100

# Number: 100, 101, 102, 108, 109, 110, 117

# Mandatory

P524 = 100

# Broadsoft

# Broadsoft Call Center. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2541 = 0

# Hoteling Event. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2542 = 0

# Call Center Status. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2543 = 0

# Feature Key Synchronization. 0 - Disabled, 1 - Enabled. Default is 0

# Number: 0, 1

# Mandatory

P2525 = 0

# Broadsoft Call Park. 0 - Disabled, 1 - Enabled. Default is 0

# Number: 0, 1

# Mandatory

P2588 = 0

##########################################

# Account 3/SIP Settings/Session Timer

##########################################

# Enable Session Timer. 0 - No, 1 - Yes. Default is 1

# Number: 0, 1

# Mandatory

P2595 = 1

# Session Expiration (in seconds). Default is 180

# Number: 90 - 64800

# Mandatory

P534 = 180

# Minimum SE (in seconds). Default is 90. This value must be lower than or equal to P534

# Number: 90 - 64800

# Mandatory

P527 = 90

# Caller Request Timer (Request for timer when calling) 0 - No, 1 - Yes

# Number: 0, 1

# Mandatory

P528 = 0

# Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one)

# 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P529 = 0

# Force Timer (Still use timer when remote party does not support timer). 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P530 = 0

# UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS. Default is 0

# Number: 0, 1, 2

# Mandatory

P532 = 0

# UAS Specify Refresher. 1 - UAC, 2 - UAS. Default is 1

# Number: 1, 2

# Mandatory

P533 = 1

# Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE). 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P531 = 0

##########################################

# Account 3/SIP Settings/Security Settings

##########################################

# Check Domain Certificates. When set to Yes/Enabled, the domain certificate will be checked as defined in RFC5922

# 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2511 = 0

# Validate Certification Chain. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2567 = 0

# Validate Incoming Messages. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2506 = 0

# Check SIP User ID for incoming INVITE. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P549 = 0

# Accept Incoming SIP from Proxy Only. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2547 = 0

# Authenticate Incoming INVITE. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2546 = 0

##########################################

# Account 3/Audio Settings

##########################################

# Preferred Vocoder

# 0 - PCMU, 2 - G.726-32, 8 - PCMA, 9 - G.722, 18 - G.729A/B, 4 - G.723.1, 98 - iLBC, 125 - OPUS

# choice 1. Default is 0

# Number: 0, 2, 4, 8, 9, 18, 98, 125 

# Mandatory

P551 = 0

# choice 2. Default is 8

# Number: 0, 2, 4, 8, 9, 18, 98, 125 

# Mandatory

P552 = 8

# choice 3. Default is 4

# Number: 0, 2, 4, 8, 9, 18, 98, 125 

# Mandatory

P553 = 4

# choice 4. Default is 18

# Number: 0, 2, 4, 8, 9, 18, 98, 125 

# Mandatory

P554 = 18

# choice 5. Default is 9

# Number: 0, 2, 4, 8, 9, 18, 98, 125 

# Mandatory

P555 = 9

# choice 6. Default is 98

# Number: 0, 2, 4, 8, 9, 18, 98, 125 

# Mandatory

P556 = 98

# choice 7. Default is 2

# Number: 0, 2, 4, 8, 9, 18, 98, 125 

# Mandatory

P557 = 2

# choice 8. Default is 125

# Number: 0, 2, 4, 8, 9, 18, 98, 125 

# Mandatory

P558 = 125

# Use First Matching Vocoder in 200OK SDP. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2548 = 0

# Disable Multiple m line in SDP

# 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P587 = 0

# SRTP Mode

# 0 - Disabled, 1 - Enabled but not forced, 2 - Enabled and forced, 3 - Optional. Default is 0

# Number: 0, 1, 2, 3

# Mandatory

P543 = 0

# Crypto Life Time

# 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2563 = 0

# Symmetric RTP. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P560 = 0

# Silence Suppression 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P585 = 0

# Jitter Buffer Type. 0 - Fixed, 1 - Adaptive. Default is 1

# Number: 0, 1

# Mandatory

P598 = 1

# Jitter Buffer Length. 0 - 100ms, 1 - 200ms, 2 - 300ms, 3 - 400ms, 4 - 500ms, 5 - 600ms, 6 - 700ms, 7 - 800ms. Default is 2

# Number: 0, 1, 2, 3, 4, 5, 6, 7

# Mandatory

P597 = 2

# Voice Frames per TX (up to 10/20/32/64 frames for G711/G726/G723/other codecs respectively). Default is 2

# Number: 1 - 64

# Mandatory

P586 = 2

# G723 Rate. 0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate. Default is 1

# Number: 0, 1

# Mandatory

P593 = 1

# G.726-32 Packing Mode. 0 - ITU, 1 - IETF. Default is 0

# Number: 0, 1

# Mandatory

P2523 = 0

# iLBC Frame Size. 0 - 20ms, 1 - 30ms. Default is 1

# Number: 0, 1

# Mandatory

P595 = 1

# iLBC Payload Type. Default is 97

# Number: 96 - 127

# Mandatory

P594 = 97

# OPUS Payload Type. Default is 123

# Number: 96 - 127

# Mandatory

P2585 = 123

# DTMF Payload Type. Default is 101

# Number: 96 - 127

# Mandatory

P596 = 101

# Send DTMF: In-audio. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2501 = 0

# Send DTMF: Via RTP (RFC2833). 0 - No, 1 - Yes. Default is 1

# Number: 0, 1

# Mandatory

P2502 = 1

# Send DTMF: Via SIP INFO. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2503 = 0

##########################################

# Account 3/Call Settings

##########################################

# Early Dial (use "Yes" only if proxy supports 484 response). 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P522 = 0

# Dial Plan Prefix

# String

P519 = 

# Dial Plan. Default is { x+ | \+x+ | *x+ | *xx*x+ }

# String

# Mandatory

P559= { x+ | \+x+ | *x+ | *xx*x+ }

# Bypass Dial Plan

# String: contact,incoming,outgoing,dialing,mpk,api. Default is mpk

P2582 = mpk

# Call Log. 0 - Log All Calls, 1 - Log Incoming/Outgoing only (Missed calls NOT recorded), 2 - Disable Call Log. Default is 0

# Number: 0, 1, 2

# Mandatory

P542 = 0

# Account Ring Tone. 

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P523 = 0

# Matching Incoming Caller ID. Matching Rule 1

# String

P1500 = 

# Matching Rule 1 Distinctive Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P1501 = 0

# Matching Incoming Caller ID. Matching Rule 2

# String

P1502 =

# Matching Rule 2 Distinctive Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P1503 = 0

# Matching Incoming Caller ID. Matching Rule 3

# String

P1504 =

# Matching Rule 3 Distinctive Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P1505 = 0

# Matching Incoming Caller ID. Matching Rule 4

# String

P6728 = 

# Matching Rule 4 Distinctive Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P6729 = 0

# Matching Incoming Caller ID. Matching Rule 5

# String

P6730 = 

# Matching Rule 5 Distinctive Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P6731 = 0

# Matching Incoming Caller ID. Matching Rule 6

# String

P6732 = 

# Matching Rule 6 Distinctive Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P6733 = 0

# Matching Incoming Caller ID. Matching Rule 7

# String

P26264 = 

# Matching Rule 7 Distinctive Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P26265 = 0

# Matching Incoming Caller ID. Matching Rule 8

# String

P26266 = 

# Matching Rule 8 Distinctive Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P26267 = 0

# Matching Incoming Caller ID. Matching Rule 9

# String

P26268 = 

# Matching Rule 9 Distinctive Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P26269 = 0

# Matching Incoming Caller ID. Matching Rule 10

# String

P26296 = 

# Matching Rule 10 Distinctive Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P26297 = 0

# Ring Timeout (in seconds). Default is 60

# Number: 30 - 3600

# Mandatory

P576 = 60

# Send Anonymous (caller ID will be blocked if set to Yes). 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P521 = 0

# Anonymous Call Rejection. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P546 = 0

# Auto Answer. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P525 = 0

# Allow Auto Answer by Call-Info. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P538 = 0

# Custom Call-Info for Auto Answer.

# String

P2556 =

# Refer-To Use Target Contact. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P569 = 0

# Transfer on conference Hang-Up. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2504 = 0

#Disable Recovery on Blind Transfer. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2584 = 0

# No Key Entry Timeout. Default is 4

# Number: 1 - 15

# Mandatory

P591 = 4

# Use # as Dial Key. 0 - No, 1 - Yes. Default is 1

# Number: 0, 1

# Mandatory

P592 = 1

# On Hold Reminder Tone. 0 - Disabled, 1 - Enabled. Default is 0.

# Number: 0, 1

# Mandatory

P26206 = 0

##########################################

# Account 3/Feature Codes

##########################################

#Enable Call Features.  0 - No, 1 - Yes. Default is 1

#Number: 0, 1 

#Mandatory

P520 = 1

#Do Not Disturb (DND) - On

# String

P2544 = 

#Do Not Disturb (DND) - Off

# String

P2545 =

#Delayed Call Forward Wait Time (in seconds). Default is 20

#Number: 1 - 120

#Mandatory

P570 = 20

####################################################################

# Account 4  - GXP1782/1780 Only

####################################################################

##########################################

# Account 4/General Settings

##########################################

# Account Active. 0 - No, 1 - Yes. Default is 1

# Number: 0, 1

# Mandatory

# P601 = 1

# Account Name

# String

# P617 =

# SIP Server

# String

# P602 = 

# Secondary SIP Server

# String

# P2612 =

# Outbound Proxy

# String

# P603 =

# Backup Outbound Proxy

# String

# P2633 = 

# BLF Server

# String

# P2675 =

# SIP User ID

# String

# P604 = 

# Authenticate ID

# String

# P605 =

# Authenticate password

# String

# P606 =

# Name

# String

# P607 =

# Voice Mail UserID

# String

# P626 =

# Account Display

# Number: 0 - User Name, 1 - User Identification. Default is 0.

# Mandatory

P2680 = 0

##########################################

# Account 4/Network Settings

##########################################

# DNS Mode. 0 - A Record, 1 - SRV, 2 - NAPTR/SRV, 3 - Use Configured IP. Default is 0

# Number: 0, 1, 2, 3

# Mandatory

# P608 = 0

# Primary IP. Maximum 15 characters

# String 

# P2608 = 

# Backup IP 1

# String

# P2609 =

# Backup IP 2

# String

# P2610 =

# NAT Traversal. 0 - No, 1 - STUN, 2 - keep alive, 3 - UPnP, 4 - Auto, 5 - VPN. Default is 0

# Number: 0, 1, 2, 3, 4, 5

# Mandatory

# P614 = 0

# Proxy-Require (A SIP extension to enable firewall penetration). Max length is 64 characters

# String

# P618 =

# Use SBC. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P26390 = 0

##########################################

# Account 4/SIP Settings/Basic Settings

##########################################

# TEL URI. 0 - Disabled, 1 - User=Phone, 2 - Enabled. Default is 0

# Number: 0, 1, 2

# Mandatory

# P609 = 0

# SIP Registration. 0 - No, 1 - Yes. Default is 1

# Number: 0, 1

# Mandatory

# P610 = 1

# Unregister On Reboot. 0 - No, 1 - Yes, 2 - Instance. Default is 0

# Number: 0, 1

# Mandatory

# P611 = 0

# Register Expiration (in minutes). Default is 60. Max is 45 days

# Number: 1 - 64800

# Mandatory

# P612 = 60

# Subscribe Expiration. Default is 60. 

# Number: 1-64800 

# Mandatory

# P26351 = 60

# Reregister before Expiration (in seconds). Default is 0

# Number: 0 - 64800

# Mandatory

# P2630 = 0

# Enable OPTIONS Keep Alive. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

# P2697 = 0

# OPTIONS Keep Alive Interval. Default is 30.

# Number

# Mandatory

# P2698 = 30

# OPTIONS Keep Alive Max Lost. Default is 3.

# Number

# Mandatory

# P2699 = 3

# Local SIP port. Default is 5066

# Number

# Mandatory

# P613 = 5066

# SIP Registration Failure Retry Wait Time (in seconds). Default is 20

# Number: 1 - 3600

# Mandatory

# P671 = 20

# SIP T1 Timeout. RFC 3261 T1 value (RTT estimate)

# 50 - 0.5 sec, 100 - 1 sec, 200 - 2 sec. Default is 100

# Number: 50, 100, 200

# Mandatory

# P640 = 50

# SIP T2 Timeout. RFC 3261 T2 value. The maximum retransmit interval for non-INVITE requests and INVITE responses

# 200 - 2 sec, 400 - 4 sec, 800 - 8 sec. Default is 400

# Number: 200, 400, 800

# Mandatory

# P641 = 400

# SIP Transport. 0 - UDP, 1 - TCP. 2 - TCP/TLS. Default is 0

# Number: 0, 1, 2

# Mandatory

# P648 = 0

# SIP URI Scheme When Using TLS. 0 - sip, 1 - sips. Default is 1

# Number: 0, 1

# Mandatory

# P2629 = 1

# Use Actual Ephemeral Port in Contact with TCP/TLS. 0 - No, 1- Yes. Default is 0

# Number: 0, 1

# Mandatory

# P2631 = 0

# Outbound Proxy Mode. 0 - in route, 1 - not in route, 2 - always send to. Default is 0

# Number: 0, 1, 2

# Mandatory

# P2605 = 0

# Support SIP Instance ID. 0 - No, 1 - Yes. Default is 1

# Number: 0, 1

# Mandatory

# P689 = 1

# SUBSCRIBE for MWI (Whether or not send SUBSCRIBE for Message Waiting Indication). 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

# P615 = 0

# SUBSCRIBE for Registration. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

# P2619 = 0

# Enable 100rel. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

# P635 = 0

# Callee ID Display. 0 - Auto, 1 - Disabled, 2 - To Header. Default is 0

# Number: 0, 1, 2

# Mandatory

# P26325= 0

# Caller ID Display. 0 - Auto, 1 - Disabled, 2 - From Header. Default is 0

# Number: 0, 1, 2

# Mandatory

# P2624 = 0

# Ignore Alert-Info header

# 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

# P26318 = 0

# Add Auth Header On Initial REGISTER. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P2659 = 0

###############################################################

# Account 4/SIP Settings/Custom SIP Headers

###############################################################

# Use Privacy Header

# 0 - Default, 1 - No, 2 - Yes. Default is 0

# Number: 0, 1, 2

# Mandatory

# P2638 = 0

# Use P-Preferred-Identity Header

# 0 - Default, 1 - No, 2 - Yes. Default is 0

# Number: 0, 1, 2

# Mandatory

# P2639 = 0

# Use X-Grandstream-PBX Header. Default is 1.

# Number 0, 1

# Mandatory

# P26354 = 1

# Use P-Access-Network-Info Header. 0 - No, 1 - Yes. Default is 1.

# Number 0, 1

# Mandatory

# P26358 = 1

# Use P-Emergency-Info Header. 0 - No, 1 - Yes. Default is 1.

# Number 0, 1

# Mandatory

# P26359 = 1

# Use MAC Header

# Number: 0 - No, 1 - Yes. Default is 0.

# Mandatory

P26361 = 0

##########################################

# Account 4/SIP Settings/Advanced Features

##########################################

# Line-Seize Timeout (in seconds). Default is 15

# Number: 15 - 60

# Mandatory

# P2613 = 15

# Eventlist BLF URI

# String

# P644 = 

# Auto Provision Eventlist BLFs. 0-Disabled, 1-Enabled. Default is 0

# Number:0,1

# Mandatory

# P2689 = 0

# Conference URI

# String

# P2618 =

# Music On Hold URI

# String

# P2650 =

# Force BLF Call-pickup by prefix. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

# P6755 = 0

# BLF Call-pickup Prefix. Default is **

# String

# Mandatory

# P681 = **

# Call Pickup Barge-In Code

# String

# P26346 = 

# PUBLISH for Presence. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

# P688 = 0

# Omit charset=UTF-8 in MESSAGE. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

# P2655 = 0

# Special Feature. 100 - Standard, 101 - Nortel MCS, 102- Broadsoft, 108 - CBCOM, 109 - RNK, 110 - Sylantro, 117 - Huawei IMS. Default is 100

# Number: 100, 101, 102, 108, 109, 110, 117

# Mandatory

# P624 = 100

# Broadsoft

# Broadsoft Call Center. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

# P2641 = 0

# Hoteling Event. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

# P2642 = 0

# Call Center Status. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

# P2643 = 0

# Feature Key Synchronization. 0 - Disabled, 1 - Enabled. Default is 0

# Number: 0, 1

# Mandatory

# P2625 = 0

# Broadsoft Call Park. 0 - Disabled, 1 - Enabled. Default is 0

# Number: 0, 1

# Mandatory

# P2688 = 0

##########################################

# Account 4/SIP Settings/Session Timer

##########################################

# Enable Session Timer. 0 - No, 1 - Yes. Default is 1

# Number: 0, 1

# Mandatory

# P2695 = 1

# Session Expiration (in seconds). Default is 180

# Number: 90 - 64800

# Mandatory

# P634 = 180

# Minimum SE (in seconds). Default is 90 seconds. This value must be lower than or equal to P634

# Number: 90 - 64800

# Mandatory

# P627 = 90

# Caller Request Timer (Request for timer when calling). 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

# P628 = 0

# Callee Request Timer (Request for timer when called. i.e. if remote party supports timer but did not request for one)

# 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

# P629 = 0

# Force Timer (Still use timer when remote party does not support timer). 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

# P630 = 0

# UAC Specify Refresher. 0 - omit, 1 - UAC, 2 - UAS. Default is 0

# Number: 0 - 2

# Mandatory

# P632 = 0

# UAS Specify Refresher. 1 - UAC, 2 - UAS. Default is 1

# Number: 1, 2

# Mandatory

# P633 = 1

# Force INVITE (Always refresh with INVITE instead of UPDATE even when remote party supports UPDATE).

# 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

# P631 = 0

##########################################

# Account 4/SIP Settings/Security Settings

##########################################

# Check Domain Certificates. When set to Yes/Enabled, the domain certificate will be checked as defined in RFC5922

# 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

# P2611 = 0

# Validate Certification Chain. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

# P2667 = 0

# Validate Incoming Messages. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

# P2606 = 0

# Check SIP User ID for incoming INVITE. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

# P649 = 0

# Accept Incoming SIP from Proxy Only. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

# P2647 = 0

# Authenticate Incoming INVITE. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

# P2646 = 0

##########################################

# Account 4/Audio Settings

##########################################

# Preferred Vocoder

# 0 - PCMU, 2 - G.726-32, 8 - PCMA, 9 - G.722, 18 - G.729A/B, 4 - G.723.1, 98 - iLBC, 125 - OPUS

# choice 1. Default is 0

# Number: 0, 2, 4, 8, 9, 18, 98, 125 

# Mandatory

# P651 = 0

# choice 2. Default is 8

# Number: 0, 2, 4, 8, 9, 18, 98, 125 

# Mandatory

# P652 = 8

# choice 3. Default is 4

# Number: 0, 2, 4, 8, 9, 18, 98, 125 

# Mandatory

# P653 = 4

# choice 4. Default is 18

# Number: 0, 2, 4, 8, 9, 18, 98, 125 

# Mandatory

# P654 = 18

# choice 5. Default is 9

# Number: 0, 2, 4, 8, 9, 18, 98, 125 

# Mandatory

# P655 = 9

# choice 6. Default is 98

# Number: 0, 2, 4, 8, 9, 18, 98, 125 

# Mandatory

# P656 = 98

# choice 7. Default is 2

# Number: 0, 2, 4, 8, 9, 18, 98, 125 

# Mandatory

# P657 = 2

# choice 8. Default is 125

# Number: 0, 2, 4, 8, 9, 18, 98, 125 

# Mandatory

# P658 = 125

# Use First Matching Vocoder in 200OK SDP. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

# P2648 = 0

# Disable Multiple m line in SDP

# 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

# P687 = 0

# SRTP Mode

# 0 - Disabled, 1 - Enabled but not forced, 2 - Enabled and forced, 3 - Optional. Default is 0

# Number: 0, 1, 2, 3

# Mandatory

# P643 = 0

# Crypto Life Time

# 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

# P2663 = 0

# Symmetric RTP. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

# P660 = 0

# Silence Suppression 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

# P685 = 0

# Jitter Buffer Type. 0 - Fixed, 1 - Adaptive. Default is 1

# Number: 0, 1

# Mandatory

# P698 = 1

# Jitter Buffer Length. 

# 0 - 100ms, 1 - 200ms, 2 - 300ms, 3 - 400ms, 4 - 500ms, 5 - 600ms, 6 - 700ms, 7 - 800ms. Default is 2

# Number: 0, 1, 2, 3, 4, 5, 6, 7

# Mandatory

# P697 = 2

# Voice Frames per TX (up to 10/20/32/64 frames for G711/G726/G723/other codecs respectively). Default is 2

# Number: 1 - 64

# Mandatory

# P686 = 2

# G723 Rate. 0 - 6.3kbps encoding rate, 1 - 5.3kbps encoding rate. Default is 1

# Number: 0, 1

# Mandatory

# P693 = 1

# G.726-32 Packing Mode. 0 - ITU, 1 - IETF. Default is 0

# Number: 0, 1

# Mandatory

# P2623 = 0

# iLBC Frame Size. 0 - 20ms, 1 - 30ms. Default is 1

# Number: 0, 1

# Mandatory

# P695 = 1

# iLBC Payload Type. Default is 97

# Number: 96 - 127

# Mandatory

# P694 = 97

# OPUS Payload Type. Default is 123

# Number: 96 - 127

# Mandatory

# P2685 = 123

# DTMF Payload Type. Default is 101

# Number: 96 - 127

# Mandatory

# P696 = 101

# Send DTMF: In-audio. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

# P2601 = 0

# Send DTMF: Via RTP (RFC2833). 0 - No, 1 - Yes. Default is 1

# Number: 0, 1

# Mandatory

# P2602 = 1

# Send DTMF: Via SIP INFO. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

# P2603 = 0

##########################################

# Account 4/Call Settings

##########################################

# Early Dial (use "Yes" only if proxy supports 484 response). 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

# P622 = 0

# Dial Plan Prefix

# String

# P619 = 

# Dial Plan. Default is { x+ | \+x+ | *x+ | *xx*x+ }

# String

# Mandatory

# P659= { x+ | \+x+ | *x+ | *xx*x+ }

# Bypass Dial Plan

# String: contact,incoming,outgoing,dialing,mpk,api. Default is mpk

P2682 = mpk

# Call Log. 0 - Log All Calls, 1 - Log Incoming/Outgoing only (Missed calls NOT recorded), 2 - Disable Call Log. Default is 0

# Number: 0, 1, 2

# Mandatory

# P642 = 0

# Account Ring Tone.

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

# P623 = 0

# Matching Incoming Caller ID. Matching Rule 1

# String

# P1506 = 

# Matching Rule 1 Distinctive Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

# P1507 = 0

# Matching Incoming Caller ID. Matching Rule 2

# String

# P1508 = 

# Matching Rule 2 Distinctive Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

# P1509 = 0

# Matching Incoming Caller ID. Matching Rule 3

# String

# P1510 =

# Matching Rule 3 Distinctive Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

# P1511 = 0

# Matching Incoming Caller ID. Matching Rule 4

# String

P6734 = 

# Matching Rule 4 Distinctive Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P6735 = 0

# Matching Incoming Caller ID. Matching Rule 5

# String

P6736 = 

# Matching Rule 5 Distinctive Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P6737 = 0

# Matching Incoming Caller ID. Matching Rule 6

# String

P6738 = 

# Matching Rule 6 Distinctive Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P6739 = 0

# Matching Incoming Caller ID. Matching Rule 7

# String

P26364 = 

# Matching Rule 7 Distinctive Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P26365 = 0

# Matching Incoming Caller ID. Matching Rule 8

# String

P26366 = 

# Matching Rule 8 Distinctive Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P26367 = 0

# Matching Incoming Caller ID. Matching Rule 9

# String

P26368 = 

# Matching Rule 9 Distinctive Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P26369 = 0

# Matching Incoming Caller ID. Matching Rule 10

# String

P26396 = 

# Matching Rule 10 Distinctive Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P26397 = 0

# Ring Timeout (in seconds). Default is 60

# Number: 30 - 3600

# Mandatory

# P676 = 60

# Send Anonymous (caller ID will be blocked if set to Yes). 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

# P621 = 0

# Anonymous Call Rejection. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

# P646 = 0

# Auto Answer. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

# P625 = 0

# Allow Auto Answer by Call-Info. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

# P638 = 0

# Custom Call-Info for Auto Answer.

# String

# P2656 =

# Refer-To Use Target Contact. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

# P669 = 0

# Transfer on conference Hang-Up. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

# P2604 = 0

#Disable Recovery on Blind Transfer. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

# P2684 = 0

# No Key Entry Timeout. Default is 4

# Number: 1 - 15

# Mandatory

# P691 = 4

# Use # as Dial Key. 0 - No, 1 - Yes. Default is 1

# Number: 0, 1, 2

# Mandatory

# P692 = 1

# On Hold Reminder Tone. 0 - Disabled, 1 - Enabled. Default is 0.

# Number: 0, 1

# Mandatory

P26306 = 0

##########################################

# Account 4/Feature Codes

##########################################

#Enable Call Features.  0 - No, 1 - Yes. Default is 1

#Number: 0, 1 

#Mandatory

# P620 = 1

#Do Not Disturb (DND) - On

# String

# P2644 = 

# Do Not Disturb (DND) - Off

# String

# P2645 = 

# Delayed Call Forward Wait Time (in seconds). Default is 20

# Number: 1 - 120

# Mandatory

# P670 = 20

##############################################################################

##  Settings/General Settings

##############################################################################

# Local RTP port. Default is 5004

# Number: 1024 - 65400. Must be even number

# Mandatory

P39 = 5004

# Use Random Port. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P78 = 0

# Keep-Alive Interval (in seconds). Default is 20

# Number: 10 - 160

# Mandatory

P84 = 20

# Use NAT IP. This will enable our SIP client to use this IP in the SIP/SDP message. Example 64.3.153.50

# String: a-z, A-Z, 0-9, ".", ":"

P101 =

# STUN server

# String

P76 =

# Public Mode. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P1345 = 0

# Enable Fix For RTP Timestamp Jump. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P8389 = 0

# Test Password Strength

# Number: 0 - No, 1 - Yes. Default is 0.

# Mandatory

P8468 = 0

##############################################################################

##  Settings/Call Features

##############################################################################

# Onhook Dial Barging. 0 - Disabled, 1 - Enabled. Default is 1

# Number: 0, 1

# Mandatory

#P8397 = 1

# Off-hook Auto Dial

# String

P71 =

# Off-hook Timeout (in seconds). Default is 30

# Number: 10 - 60

# Mandatory

P1485 = 30

# Enable Automatic Redial. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P8353 = 0

# Automatic Redial Times. Default is 10.

# Number: 1 - 100

# Mandatory

P8354 = 10

# Automatic Redial Interval. Default is 20.

# Number: 1 - 360

# Mandatory

P8355 = 20

# Bypass Dial Plan Through Call History and Directories. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P6758 = 0

# Disable Call Waiting. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P91 = 0

# Disable Call Waiting Tone. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P186 = 0

# Ring For Call Waiting

# Number: 0 - No, 1 - Yes. Default is 0.

# Mandatory

P22102 = 0

# Disable Busy Tone on Remote Disconnect. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P6762 = 0

# Disable Direct IP Call. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P1310 = 0

# Use Quick IP call mode. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P184 = 0

# Disable Conference. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P1311 = 0

# Disable in-call DTMF display. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P338 = 0

# Mute Key Functions While Idle. 0 - DND, 1 - Idle Mute, 2 - Disabled. Default is 0

# Number: 0,1,2

# Mandatory

P1565 = 0

# Enable Auto Unmute. 0 - No, 1 - Yes. Default is 1

# Number: 0,1,2

# Mandatory

P8488 = 1

# Disable Transfer. 0 - No, 1 - Yes. Defauls is 0

# Number: 0, 1

# Mandatory

P1341 = 0

# In-call Dial Number on pressing transfer key

# String

P1525 =

# Attended Transfer Mode. 0 - Static, 1 - Dynamic. Default is 0

# Number: 0, 1

# Mandatory

P1376 = 0

# Do not Escape '#' as 23% in SIP URI. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P1406 = 0

# Use Pound (#) For Redial. . 0 - No, 1 - Yes. Default is 1

# Number: 0, 1

# Mandatory

P8504 = 1

# Click-To-Dial Feature. 0 - Disabled, 1 - Enabled. Default is 0

# Number: 0, 1

# Mandatory

P1561 = 0

# Write Timeout. Default is 300.

# Number

# Mandatory

P1433 = 300

# Max Unsaved Log. Default is 200.

# Number

# Mandatory

P1434 = 200

# Default call log type. 0 - Default, 1 - Broadsoft Call Log, 2 - Local Call Log.

# Number: 0,1,2. Default is 0.

# Mandatory

P6765 = 0

# Return Code When Refusing Incoming Call. Default is 0

# Number: 0,1,2,3. 0 - Busy, 1 - Temporarily Unavailable, 2 - Not Found(404), 3 - Decline(603).

# Mandatory

P8360 = 0

# Return Code When Enable DND. Default is 0

# Number: 0,1,2,3. 0 - Busy, 1 - Temporarily Unavailable, 2 - Not Found(404), 3 - Decline(603).

# Mandatory

P8361 = 0

# Local Call Recording Feature. 0 - Disable, 1 - Enable. Default is 0

# Number: 0, 1

# Mandatory

P6760 = 0

# Saved Local Call Recording Location. 0 - Internal Storage 1 - USB. Default is 0.

# Number: 0, 1

# Mandatory

P6761 = 0

# User-Agent Prefix

# String

P8358 = 

# Predictive Dialing Feature. 0 - disabled, 1 - enabled. Default is 1

# Number: 0, 1

# Mandatory

P22126 = 1

# Enable Enhanced Acoustic Echo Canceller. 0 - No, 1 - Yes. Default is 1

# Number: 0, 1

# Mandatory

P22175 = 1

# Enable Diversion Information Display. 0 - No, 1 - Yes. Default is 1

# Number: 0, 1

# Mandatory

P22237 = 1

##############################################################################

##  Settings/Multicast Paging

##############################################################################

# Paging Barge. 0 - Disable, 1 - priority 1, 2 - priority 2, 3 - priority 3, 

# 4 - priority 4, 5 - priority 5, 6 - priority 6, 7 - priority 7, 8 - priority 8,

# 9 - priority 9, 10 - priority 10. Default is 0.

# Number: 0 - 10

# Mandatory

P1566 = 0

# Paging Priority Active. 0 - Disabled, 1 - Enabled

# Number: 0, 1

# Mandatory

P1567 = 0

# Multicast Paging Codec. 18 - G.729A/B, 0 - PCMU, 8 - PCMA, 2 - G.726-32, 9 - G.722, 98 - iLBC

# Number: 18, 0, 8, 2, 9, 98. Default is 0.

# Mandatory

P1568 = 0

To SEND / MAKE a Multicast Page you MUST assign a KEY to the Feature. (search this page for VPK 1) to see how to assign keys

### Multicast Listening ### 

# Priority 1

# Listening Address

# String

P1569 = 224.0.0.1:10000

# Label

# String

P1570 = Page

# Priority 2

# Listening Address

# String

P1571 = 

# Label

# String

P1572 = 

# Priority 3

# Listening Address

# String

P1573 = 

# Label

# String

P1574 = 

# Priority 4

# Listening Address

# String

P1575 = 

# Label

# String

P1576 = 

# Priority 5

# Listening Address

# String

P1577 = 

# Label

# String

P1578 = 

# Priority 6

# Listening Address

# String

P1579 = 

# Label

# String

P1580 = 

# Priority 7

# Listening Address

# String

P1581 = 

# Label

# String

P1582 = 

# Priority 8

# Listening Address

# String

P1583 = 

# Label

# String

P1584 = 

# Priority 9

# Listening Address

# String

P1585 = 

# Label

# String

P1586 = 

# Priority 10

# Listening Address

# String

P1587 = 

# Label

# String

P1588 = 

##############################################################################

##  Settings/Ring Tone

##############################################################################

### Call Progress Tones ###

# Syntax: f1=val,f2=val[,c=on1/off1[-on2/off2[-on3/off3]]]; 

# (Frequencies are in Hz and cadence on and off are in 10ms) 

# System Ring Tone

# String

# Mandatory

P345 = f1=440,f2=480,c=200/400;

# Dial Tone

# String

# Mandatory

P343 = f1=350,f2=440;

# Second Dial Tone

# String

# Mandatory

P2909 = f1=350,f2=440;

# Message Waiting Tone

# String

# Mandatory

P344 = f1=350,f2=440,c=10/10;

# Ring Back Tone

# String

# Mandatory

P346 = f1=440,f2=480,c=200/400;

# Call-Waiting Tone

# String

# Mandatory

P347 = f1=440,f2=440,c=25/525;

# Call-Waiting Tone Gain. 0 - Low, 1 - Medium, 2 - High. Default is 0

# Number: 0, 1, 2

# Mandatory

P1555 = 0

# Busy Tone

# String

# Mandatory

P348 = f1=480,f2=620,c=50/50;

# Reorder Tone

# String

# Mandatory

P349 = f1=480,f2=620,c=25/25;

# Speaker Ring Volume

# Number: 0-7. Default is 7.

# Mandatory

P8352="3"

# Notification Tone Volume. Default is 7.

# Number: 0 - 7

# Mandatory

P8399 = 7

# Default Ringtone

# 0 - system ring tone, 1 - custom ringtone 1, 2 - custom ringtone 2, 3 - custom ringtone, 4 - Silent, 5 - Default Ringtone, 

# 6 - Custom Ringtone 4, 7 - Custom Ringtone 5, 8 - Custom Ringtone 6, 9 - Custom Ringtone 7, 10 - Custom Ringtone 8, 

# 11 - Custom Ringtone 9, 12 - Custom Ringtone 10. Default is 0

# Number: 0 - 12

# Mandatory

P8398 = 0    

##############################################################################

##  Settings/Audio Control

##############################################################################

# HEADSET Key Mode. 0 - Default Mode, 1 - Toggle Headset/Speaker. Default is 0

# Number: 0, 1

# Mandatory

P1312 = 0

# Headset Type. 0 - Normal, 1 - Plantronics EHS. Default is 0

# Number: 0, 1

# Mandatory

P1487 = 0

# Always Ring Speaker. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P1439 = 0

# Headset TX gain(db). 1 - -6, 0 - 0, 2 - +6, 3 - -9, 4 - +9, 5 - -12, 6 - -15. Default is 0

# Number: 0, 1, 2, 3, 4, 5, 6

# Mandatory

P1301 = 0

# Headset RX gain(db). 1 - -6, 0 - 0, 2 - +6, 3 - -9, 4 - +9. Default is 0

# Number: 0, 1, 2, 3, 4

# Mandatory

P1302 = 0

# Handset TX gain(db). 1 - -6, 0 - 0, 2 - +6. Default is 0

# Number: 0, 1, 2

# Mandatory

P1464 = 0

##############################################################################

##  Settings/LCD Display

##############################################################################

# Backlight Brightness.

# Active. Default is 6.

# Number

# Mandatory

P334 = 6

# Backlight Brightness.

# Idle. Default is 2.

# Number

# Mandatory

P335 = 2

# Active Backlight Timeout

# Number: 1-90, 0 - Disabled. Default is 1. 

# Mandatory

P8356 = 1

# Disable Missed Call Backlight. 0 - No, 1 - Yes, 2 - Yes, but flash MWI LED. Default is 0

# Number: 0, 1, 2

# Mandatory

P351 = 0

# Softkeys

# Hide System Softkey on Main Page. Next, History, ForwardAll, Redial.

# String

P8348 = 

###############################################################

# Settings/LED Control

###############################################################

# Disable VM/MSG power light flash

# Number: 0 - No, 1 - Yes. Default is 0.

# Mandatory

P8371 = 0

##############################################################################

##  Settings/Date and Time

##############################################################################

# NTP Server

# String

P30 = us.pool.ntp.org

# NTP Update Interval

# String

# Number: 5 - 1440o< Default is 1440 

P5005 = 1440

# Allow DHCP Option 42 to override NTP server. 0 - No, 1 - Yes. Default is 1

# When set to Yes(1), it will override the configured NTP server

# Number: 0, 1

# Mandatory

P144 = 1

# Time Zone

# P value                                                                                         Web GUI Option 

# auto                                                                                               Automatic

# TZA+12                                                                                        GMT-12:00 (International Date Line West)

# TZB+11                                                                                        GMT-11:00 (Midway Island, Samoa) 

# HAW10                                                                                         GMT-10:00 (US Hawaiian Time) 

# AKST9AKDT                                                                                  GMT-9:00 (US Alaska Time) 

# PST8PDT                                                                                     GMT-8:00 (US Pacific Time, Los Angeles)

# PST8PDT,M3.2.0,M11.1.0                                                                     GMT-08:00 (Baja California)

# MST7MDT                                                                                     GMT-07:00 (US Mountain Time, Denver) 

# MST7                                                                                         GMT-07:00 (Mountain Time (Arizona, no DST)) 

# MST7MDT,M4.1.0,M10.5.0                                                                      GMT-07:00 (Chihuahua, La Paz, Mazatlan)

# CST6CDT                                                                                       GMT-06:00 (Central Time) 

# CST+6                                                                                            GMT-06:00 (Central America) 

# CST6CDT,M4.1.0,M10.5.0                                                                      GMT-06:00 (Guadalajara, Mexico City, Monterrey)

# EST5EDT                                                                                       GMT-05:00 (Eastern Time)

# EST5                                                                                               GMT-05:00 (Eastern Time without daylight saving) 

# TZf+4:30                                                                                         GMT-04:30 (Caracas) 

# AST4ADT                                                                                       GMT-04:00 (Atlantic Time) 

# AST4ADT,M3.2.0,M11.1.0                                                                    GMT-04:00 (Atlantic Time (New Brunswick)) 

# NST+3:30NDT+2:30,M3.2.0/00:01:00,M11.1.0/00:01:00                                        GMT-03:30 (Newfoundland Time) 

# TZK+3                                                                                              GMT-03:00 (Greenland) 

# BRST+3BRDT+2,M10.3.0,M2.3.0                                                                   GMT-03:00 (Brazil, Sao Paulo) 

# UTC+3                                                                                              GMT-02:00 (Argentina) 

# TZL+2                                                                                               GMT-02:00 (Mid-Atlantic) 

# TZM+1                                                                                              GMT-01:00 (Azores, Cape Verdi Is.) 

# TZN+0                                                                                              GMT (Edinburgh, Casablanca, Monrovia) 

# GMT+0BST-1,M3.5.0/01:00:00,M10.5.0/02:00:00                                             GMT (London, Great Britain) 

# WET-0WEST-1,M3.5.0/01:00:00,M10.5.0/02:00:00                                            GMT (Lisbon, Portugal) 

# GMT+0IST-1,M3.5.0/01:00:00,M10.5.0/02:00:00                                           GMT (Dublin, Ireland) 

# CET-1CEST-2,M3.5.0/02:00:00,M10.5.0/03:00:00                       GMT+01:00 (Paris, Vienna, Warsaw, Roma, Madrid, Prague, Berlin, Budapest, Amsterdam, Belgium)  

# TZP-2                                                                     GMT+02:00 (Israel, Cairo, Athens, Istanbul, Buchrest) 

# EET-2EEST-3,M3.5.0/03:00:00,M10.5.0/04:00:00                         GMT+02:00 (Helsinki, Athens, Tallinn) 

# EET-2EEST,M3.5.0/3,M10.5.0/4                                                   GMT+02:00 (Kyiv, Ukraine) 

# TZQ-3                                                                                               GMT+03:00 (Kuwait, Baghdad, Tehran, Nairobi) 

# MSK-3                                                                                           GMT+03:00 (Moscow, Russia) 

# TZR-4                                                                                               GMT+04:00 (Abu Dhabi, Baku) 

# TZS-5                                                                                               GMT+05:00 (Islamabad, Ekaterinburg, Karachi, Tashkent) 

# TZT-5:30                                                                                          GMT+05:30 (Chennai, New Delhi, Mumbai) 

# TZU-5:45                                                                                          GMT+05:45 (Kathmandu) 

# TZV-6                                                                                               GMT+06:00 (Almaty, Astana, Dhaka, Novosibirsk) 

# TZW-6:30                                                                                        GMT+06:30 (Rangoon) 

# TZX-7                                                                                               GMT+07:00 (Bankok, Hanoi, Krasnoyarsk) 

# WIB-7                                                                                               GMT+07:00 (Jakarta) 

# TZY-8                                                                                               GMT+08:00 (Beijing, Taipei, Kuala Lumpur, Irkutsk) 

# SGT-8                                                                                              GMT+08:00 (Singapore) 

# ULAT-8                                                                                            GMT+08:00 (Ulaanbaatar, Mongolia) 

# WST-8                                                                                             GMT+08:00 (Perth) 

# TZZ-9                                                                                               GMT+09:00 (Japan, Korea, Yakutsk) 

# CST-9:30CDT-10:30,M10.5.0/02:00:00,M3.5.0/03:00:00                                            GMT+09:30 (Adelaide) 

# CST-9:30                                                                                          GMT+09:30 (Darwin) 

# TZb-10                                                                                              GMT+10:00 (Guam) 

# EST-10EDT-11,M10.1.0/02:00:00,M3.5.0/03:00:00                                                   GMT+10:00 (Hobart) 

# EST-10EDT-11,M10.5.0/02:00:00,M3.5.0/03:00:00                                           GMT+10:00 (Sydney, Melbourne, Canberra) 

# EST-10                                                                                              GMT+10:00 (Brisbane) 

# TZc-11                                                                                               GMT+11:00 (Magadan, Solomon Is., New Caledonia) 

# NZST-12NZDT-13,M9.5.0/02:00:00,M4.1.0/03:00:00                                               GMT+12:00 (Auckland, Wellington) 

# TZd-12                                                                                               GMT+12:00 (Fiji) 

# TZe-13                                                                                               GMT+13:00 (Nuku'alofa) 

# customize                                                                                          Self-Defined Time Zone

# String

# Mandatory

P64 = EST5EDT (NDP)

# Allow DHCP Option 2 to override Time Zone setting. 0 - No, 1 - Yes. Default is 1

# When set to Yes(1), it will override the configured Time Zone setting if available 

# Number: 0, 1

# Mandatory

P143 = 1

# Self Defined Time zone. Max length allowed is 64 characters

# String

# Mandatory

P246 = MTZ+6MDT+5,M4.1.0,M11.1.0

# Date Display Format

# 0: yyyy-mm-dd      eg. 2011-10-31

# 1: mm-dd-yyyy      eg. 10-31-2011

# 2: dd-mm-yyyy      eg. 31-10-2011

# 3: dddd, MMMM dd   eg. Monday, October 31

# 4: MMMM dd, dddd   eg. October 31, Monday

# Number: 0, 1, 2, 3, 4

# Mandatory

P102 = 3 (NDP)

# Time Display Format. 0 - 12 Hour, 1 - 24 Hour

# Number: 0, 1

# Mandatory

P122 = 0

##############################################################################

##  Settings/Web Service

##############################################################################

# Use Auto Location Service. 0 - No, 1 - Yes. Default is 1

# Number: 0, 1

# Mandatory

P8338 = 1

##############################################################################

##  Settings/XML Applications

##############################################################################

# Idle Screen XML Download. 0 - Disable, 1 - Enabled, use HTTP, 2 - Enabled, use TFTP, 3 - Enabled, use HTTPS. Default is 0.

# Number: 0,1,2,3

# Mandatory

P340 = 0

# Download Screen XML at Boot-up. 0 - No, 1 - Yes. Default is 0.

# Number: 0,1

# Mandatory

P1349 = 0

# Use Custom Filename. 0 - No, 1 - Yes. Default is 0.

# Number: 0,1

# Mandatory

P1343 = 0

# Idle Screen XML Server Path.

# String

P341 = 

##############################################################################

##  Settings/Programmable Keys

##############################################################################

# Settings/Programmable Keys/Virtual Multi-Purpose Keys Settings

##############################################################################

# Use Long Label. 0 - No, 1 - Yes, 2 - Maximum Length. Default is 0.

# Number: 0, 1, 2

# Mandatory

P8346 = 0

# Key Mode. 0 - Line Mode, 1 - Account Mode. Default is 0.

# Number: 0, 1 

# Mandatory

P8369 = 0

# Show Keys Label. 1 - Show, 2 - Hide. Default is 1.

# Number: 1, 2

# Mandatory

P8386 = 1

# Transfer Mode via VPK

# Number: 0 - Blind Transfer, 1 - Attended Transfer, 2 - New Call. Default is 0.

# Mandatory

P8390 = 0

# Enable transfer via non-Transfer MPK

# Number: 0 - No, 1 - Yes. Default is 0.

# Mandatory

P22162 = 0

######################################################################################

# Virtual Multi-Purpose Keys (VPKs)

# Note: 1. Fixed VPKs can only be edited. Adding or deleting Fixed VPK is not allowed.

#       2. Even if a Dynamic VPK has mode set to None, it should be added in sequence. 

#          Skipping one will remove everything after that VPK. 

######################################################################################

######################################################################################

######################################################################################

############################ For GXP1760 #############################################

NOTE VPK 1 to VPK 6 Key Mode Buttom Codes are different than VPK 7 to VPK 24

example BLF = 11 for VPK1 to VPK6, BUT it's Code 1 for BLF on VPK 7 to VPK 24

######################################################################################

# VPK 1-- fixed VPK 

######################################################################################

# Key Mode for line VPK. Default  is 0.

# Number: -1, 0, 1, 10 -- 20, 21, 23-27, 29, 30, 38

# -1 - None, 0 - Line, 1 - shared line, 10 - Speed Dial, 11 - BLF, 12 - Presence Watcher

# 13 - Eventlist BLF, 14 - Speed Dial via active account, 15 - DialDTMF

# 16 - Voicemail, 17 - Call Return, 18 - Transfer, 19 - CallPark, 20 - Intercom

# 21 - LDAP Search, 23 - Multicast Paging, 24 - Record, 25 - Call Log

# 26 - Monitored Call Park, 27 - Menu ,29-Information, 30-Message, 38-Provision

# Mandatory

# P1363 = 0

# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3 

# Number: 0, 1, 2. Default is 0.

# Mandatory

# P1364 = 0

# Description. Max length allowed is 32 characters.

# String

# P1465 =

# Value. Max length allowed is 64 characters.

# String

# P1466 =

######################################################################################

# VPK 2-- fixed VPK 

######################################################################################

# Key Mode for line VPK. Default  is 0.

# Number: -1, 0, 1, 10 -- 20, 21, 23-27, 29, 30, 38

# -1 - None, 0 - Line, 1 - shared line, 10 - Speed Dial, 11 - BLF, 12 - Presence Watcher

# 13 - Eventlist BLF, 14 - Speed Dial via active account, 15 - DialDTMF

# 16 - Voicemail, 17 - Call Return, 18 - Transfer, 19 - CallPark, 20 - Intercom

# 21 - LDAP Search, 23 - Multicast Paging, 24 - Record, 25 - Call Log

# 26 - Monitored Call Park, 27 - Menu ,29-Information, 30-Message, 38-Provision

# Mandatory

# P1365 = 0

# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3 

# Number: 0, 1, 2.  Default is 1.

# Mandatory 

# P1366 = 1

# Description. Max length allowed is 32 characters.

# String

# P1467 =

# Value. Max length allowed is 64 characters.

# String

# P1468 =

######################################################################################

# VPK 3 -- fixed VPK 

######################################################################################

# Key Mode for line VPK. Default  is 0.

# Number: -1, 0, 1, 10 -- 20, 21, 23-27, 29, 30, 38

# -1 - None, 0 - Line, 1 - shared line, 10 - Speed Dial, 11 - BLF, 12 - Presence Watcher

# 13 - Eventlist BLF, 14 - Speed Dial via active account, 15 - DialDTMF

# 16 - Voicemail, 17 - Call Return, 18 - Transfer, 19 - CallPark, 20 - Intercom

# 21 - LDAP Search, 23 - Multicast Paging, 24 - Record, 25 - Call Log

# 26 - Monitored Call Park, 27 - Menu ,29-Information, 30-Message, 38-Provision

# Mandatory

# P1367 = 0

# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3 

# Number: 0, 1, 2.  Default is 2.

# Mandatory 

# P1368 = 2

# Description. Max length allowed is 32 characters.

# String

# P1469 =

# Value. Max length allowed is 64 characters.

# String

# P1470 =

######################################################################################

# VPK 4 -- fixed VPK 

######################################################################################

# Key Mode for line VPK. Default  is 0.

# Number: -1, 0, 1, 10 -- 20, 21, 23-27, 29, 30, 38

# -1 - None, 0 - Line, 1 - shared line, 10 - Speed Dial, 11 - BLF, 12 - Presence Watcher

# 13 - Eventlist BLF, 14 - Speed Dial via active account, 15 - DialDTMF

# 16 - Voicemail, 17 - Call Return, 18 - Transfer, 19 - CallPark, 20 - Intercom

# 21 - LDAP Search, 23 - Multicast Paging, 24 - Record, 25 - Call Log

# 26 - Monitored Call Park, 27 - Menu ,29-Information, 30-Message, 38-Provision

# Mandatory

# P1369 = 29

# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3 

# Number: 0, 1, 2. Default is 3.

# Mandatory 

# P1370 = 0

# Description. Max length allowed is 32 characters.

# String

# P1471 =

# Value. Max length allowed is 64 characters.

# String

# P1472 =

######################################################################################

# VPK 5 -- fixed VPK 

######################################################################################

# Key Mode for line VPK. Default  is 0.

# Number: -1, 0, 1, 10 -- 20, 21, 23-27, 29, 30, 38

# -1 - None, 0 - Line, 1 - shared line, 10 - Speed Dial, 11 - BLF, 12 - Presence Watcher

# 13 - Eventlist BLF, 14 - Speed Dial via active account, 15 - DialDTMF

# 16 - Voicemail, 17 - Call Return, 18 - Transfer, 19 - CallPark, 20 - Intercom

# 21 - LDAP Search, 23 - Multicast Paging, 24 - Record, 25 - Call Log

# 26 - Monitored Call Park, 27 - Menu ,29-Information, 30-Message, 38-Provision

# Mandatory

# P1371 = 25

# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3 

# Number: 0, 1, 2.  Default is 4.

# Mandatory

# P1372 = 0

# Description. Max length allowed is 32 characters.

# String

# P1473 =

# Value. Max length allowed is 64 characters.

# String

# P1474 =

######################################################################################

# VPK 6 -- fixed VPK

######################################################################################

# Key Mode for line VPK. Default  is 0.

# Number: -1, 0, 1, 10 -- 20, 21, 23-27, 29, 30, 38

# -1 - None, 0 - Line, 1 - shared line, 10 - Speed Dial, 11 - BLF, 12 - Presence Watcher

# 13 - Eventlist BLF, 14 - Speed Dial via active account, 15 - DialDTMF

# 16 - Voicemail, 17 - Call Return, 18 - Transfer, 19 - CallPark, 20 - Intercom

# 21 - LDAP Search, 23 - Multicast Paging, 24 - Record, 25 - Call Log

# 26 - Monitored Call Park, 27 - Menu ,29-Information, 30-Message, 38-Provision

# Mandatory

# P1373 = 27

# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3 

# Number: 0, 1, 2. Default is 5.

# Mandatory

# P1374 = 0

# Description. Max length allowed is 32 characters.

# String

# P1475 =

# Value. Max length allowed is 64 characters.

# String

# P1476 =

###################################################################################### 

# VPK 7--Dynamic VPK THESE ARE DIFFERENT CODES THAN VPK 1 to VPK 6

######################################################################################

# Key Mode for Dynamic VPK. 

# Number: -1 -- 11, 13 - 17, 19, 20, 28

# -1 - None, 0 - Speed Dial, 1 - BLF, 2 - Presence Watcher

# 3 - Eventlist BLF, 4 - Speed Dial via active account, 5 - DialDTMF

# 6 - Voice Mail, 7 - Call Return, 8 - Transfer, 9 - Call Park, 10 - Intercom

# 11 - LDAP Search, 13 - Multicast Paging, 14 - Record, 15 - Call Log

# 16 - Monitored Call Park, 17 - Menu, 19 - Information, 20 - Message, 28 - Provision

# Mandatory

# P23800 = -1

# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3 

# Number: 0, 1, 2. Default is 0.

# Mandatory

# P23801 = 0

# Description. 

# String. 

# P23802 = 

# Value.

# String.

# P23803 =

##################################################################################### 

# VPK 8--Dynamic VPK

######################################################################################

# Key Mode for Dynamic VPK. 

# Number: -1 -- 11, 13 - 17, 19, 20, 28

# -1 - None, 0 - Speed Dial, 1 - BLF, 2 - Presence Watcher

# 3 - Eventlist BLF, 4 - Speed Dial via active account, 5 - DialDTMF

# 6 - Voice Mail, 7 - Call Return, 8 - Transfer, 9 - Call Park, 10 - Intercom

# 11 - LDAP Search, 13 - Multicast Paging, 14 - Record, 15 - Call Log

# 16 - Monitored Call Park, 17 - Menu, 19 - Information, 20 - Message, 28 - Provision

# Mandatory

# P23804 = -1

# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3 

# Number: 0, 1, 2. Default is 0.

# Mandatory

# P23805 = 0

# Description. 

# String. 

# P23806 = 

# Value.

# String.

# P23807 =

###################################################################################### 

# VPK 9--Dynamic VPK

######################################################################################

# Key Mode for Dynamic VPK. 

# Number: -1 -- 11, 13 - 17, 19, 20, 28

# -1 - None, 0 - Speed Dial, 1 - BLF, 2 - Presence Watcher

# 3 - Eventlist BLF, 4 - Speed Dial via active account, 5 - DialDTMF

# 6 - Voice Mail, 7 - Call Return, 8 - Transfer, 9 - Call Park, 10 - Intercom

# 11 - LDAP Search, 13 - Multicast Paging, 14 - Record, 15 - Call Log

# 16 - Monitored Call Park, 17 - Menu, 19 - Information, 20 - Message, 28 - Provision

# Mandatory

# P23808 = -1

# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3 

# Number: 0, 1, 2. Default is 0.

# Mandatory

# P23809 = 0

# Description. 

# String. 

# P23810 = 

# Value.

# String.

# P23811 =

###################################################################################### 

# VPK 10--Dynamic VPK

######################################################################################

# Key Mode for Dynamic VPK. 

# Number: -1 -- 11, 13 - 17, 19, 20, 28

# -1 - None, 0 - Speed Dial, 1 - BLF, 2 - Presence Watcher

# 3 - Eventlist BLF, 4 - Speed Dial via active account, 5 - DialDTMF

# 6 - Voice Mail, 7 - Call Return, 8 - Transfer, 9 - Call Park, 10 - Intercom

# 11 - LDAP Search, 13 - Multicast Paging, 14 - Record, 15 - Call Log

# 16 - Monitored Call Park, 17 - Menu, 19 - Information, 20 - Message, 28 - Provision

# Mandatory

# P23812 = -1

# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3 

# Number: 0, 1, 2. Default is 0.

# Mandatory

# P23813 = 0

# Description. 

# String. 

# P23814 = 

# Value.

# String.

# P23815 =

###################################################################################### 

# VPK 11--Dynamic VPK

######################################################################################

# Key Mode for Dynamic VPK. 

# Number: -1 -- 11, 13 - 17, 19, 20, 28

# -1 - None, 0 - Speed Dial, 1 - BLF, 2 - Presence Watcher

# 3 - Eventlist BLF, 4 - Speed Dial via active account, 5 - DialDTMF

# 6 - Voice Mail, 7 - Call Return, 8 - Transfer, 9 - Call Park, 10 - Intercom

# 11 - LDAP Search, 13 - Multicast Paging, 14 - Record, 15 - Call Log

# 16 - Monitored Call Park, 17 - Menu, 19 - Information, 20 - Message, 28 - Provision

# Mandatory

# P23816 = -1

# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3 

# Number: 0, 1, 2. Default is 0.

# Mandatory

# P23817 = 0

# Description. 

# String. 

# P23818 = 

# Value.

# String.

# P23819 =

###################################################################################### 

# VPK 12--Dynamic VPK

######################################################################################

# Key Mode for Dynamic VPK. 

# Number: -1 -- 11, 13 - 17, 19, 20, 28

# -1 - None, 0 - Speed Dial, 1 - BLF, 2 - Presence Watcher

# 3 - Eventlist BLF, 4 - Speed Dial via active account, 5 - DialDTMF

# 6 - Voice Mail, 7 - Call Return, 8 - Transfer, 9 - Call Park, 10 - Intercom

# 11 - LDAP Search, 13 - Multicast Paging, 14 - Record, 15 - Call Log

# 16 - Monitored Call Park, 17 - Menu, 19 - Information, 20 - Message, 28 - Provision

# Mandatory

# P23820 = -1

# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3 

# Number: 0, 1, 2. Default is 0.

# Mandatory

# P23821 = 0

# Description. 

# String. 

# P23822 = 

# Value.

# String.

# P23823 =

###################################################################################### 

# VPK 13--Dynamic VPK

######################################################################################

# Key Mode for Dynamic VPK. 

# Number: -1 -- 11, 13 - 17, 19, 20, 28

# -1 - None, 0 - Speed Dial, 1 - BLF, 2 - Presence Watcher

# 3 - Eventlist BLF, 4 - Speed Dial via active account, 5 - DialDTMF

# 6 - Voice Mail, 7 - Call Return, 8 - Transfer, 9 - Call Park, 10 - Intercom

# 11 - LDAP Search, 13 - Multicast Paging, 14 - Record, 15 - Call Log

# 16 - Monitored Call Park, 17 - Menu, 19 - Information, 20 - Message, 28 - Provision

# Mandatory

# P23824 = -1

# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3 

# Number: 0, 1, 2. 

# Mandatory

# P23825 = 0

# Description. 

# String. 

# P23826 = 

# Value.

# String.

# P23827 =

###################################################################################### 

# VPK 14--Dynamic VPK

######################################################################################

# Key Mode for Dynamic VPK. 

# Number: -1 -- 11, 13 - 17, 19, 20, 28

# -1 - None, 0 - Speed Dial, 1 - BLF, 2 - Presence Watcher

# 3 - Eventlist BLF, 4 - Speed Dial via active account, 5 - DialDTMF

# 6 - Voice Mail, 7 - Call Return, 8 - Transfer, 9 - Call Park, 10 - Intercom

# 11 - LDAP Search, 13 - Multicast Paging, 14 - Record, 15 - Call Log

# 16 - Monitored Call Park, 17 - Menu, 19 - Information, 20 - Message, 28 - Provision

# Mandatory

# P23828 = -1

# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3 

# Number: 0, 1, 2. 

# Mandatory

# P23829 = 0

# Description. 

# String. 

# P23830 = 

# Value.

# String.

# P23831 =

###################################################################################### 

# VPK 15--Dynamic VPK

######################################################################################

# Key Mode for Dynamic VPK. 

# Number: -1 -- 11, 13 - 17, 19, 20, 28

# -1 - None, 0 - Speed Dial, 1 - BLF, 2 - Presence Watcher

# 3 - Eventlist BLF, 4 - Speed Dial via active account, 5 - DialDTMF

# 6 - Voice Mail, 7 - Call Return, 8 - Transfer, 9 - Call Park, 10 - Intercom

# 11 - LDAP Search, 13 - Multicast Paging, 14 - Record, 15 - Call Log

# 16 - Monitored Call Park, 17 - Menu, 19 - Information, 20 - Message, 28 - Provision

# Mandatory

# P23832 = -1

# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3 

# Number: 0, 1, 2. 

# Mandatory

# P23833 = 0

# Description. 

# String. 

# P23834 = 

# Value.

# String.

# P23835 =

##################################################################################### 

# VPK 16--Dynamic VPK

######################################################################################

# Key Mode for Dynamic VPK. 

# Number: -1 -- 11, 13 - 17, 19, 20, 28

# -1 - None, 0 - Speed Dial, 1 - BLF, 2 - Presence Watcher

# 3 - Eventlist BLF, 4 - Speed Dial via active account, 5 - DialDTMF

# 6 - Voice Mail, 7 - Call Return, 8 - Transfer, 9 - Call Park, 10 - Intercom

# 11 - LDAP Search, 13 - Multicast Paging, 14 - Record, 15 - Call Log

# 16 - Monitored Call Park, 17 - Menu, 19 - Information, 20 - Message, 28 - Provision

# Mandatory

# P23836 = -1

# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3 

# Number: 0, 1, 2. 

# Mandatory

# P23837 = 0

# Description. 

# String. 

# P23838 = 

# Value.

# String.

# P23839 =

##################################################################################### 

# VPK 17--Dynamic VPK

######################################################################################

# Key Mode for Dynamic VPK. 

# Number: -1 -- 11, 13 - 17, 19, 20, 28

# -1 - None, 0 - Speed Dial, 1 - BLF, 2 - Presence Watcher

# 3 - Eventlist BLF, 4 - Speed Dial via active account, 5 - DialDTMF

# 6 - Voice Mail, 7 - Call Return, 8 - Transfer, 9 - Call Park, 10 - Intercom

# 11 - LDAP Search, 13 - Multicast Paging, 14 - Record, 15 - Call Log

# 16 - Monitored Call Park, 17 - Menu, 19 - Information, 20 - Message, 28 - Provision

# Mandatory

# P23840 = -1

# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3 

# Number: 0, 1, 2. 

# Mandatory

# P23841 = 0

# Description. 

# String. 

# P23842 = 

# Value.

# String.

# P23843 =

##################################################################################### 

# VPK 18--Dynamic VPK

######################################################################################

# Key Mode for Dynamic VPK. 

# Number: -1 -- 11, 13 - 17, 19, 20, 28

# -1 - None, 0 - Speed Dial, 1 - BLF, 2 - Presence Watcher

# 3 - Eventlist BLF, 4 - Speed Dial via active account, 5 - DialDTMF

# 6 - Voice Mail, 7 - Call Return, 8 - Transfer, 9 - Call Park, 10 - Intercom

# 11 - LDAP Search, 13 - Multicast Paging, 14 - Record, 15 - Call Log

# 16 - Monitored Call Park, 17 - Menu, 19 - Information, 20 - Message, 28 - Provision

# Mandatory

# P23844 = -1

# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3 

# Number: 0, 1, 2. 

# Mandatory

# P23845 = 0

# Description. 

# String. 

# P23846 = 

# Value.

# String.

# P23847 =

##################################################################################### 

# VPK 19--Dynamic VPK

######################################################################################

# Key Mode for Dynamic VPK. 

# Number: -1 -- 11, 13 - 17, 19, 20, 28

# -1 - None, 0 - Speed Dial, 1 - BLF, 2 - Presence Watcher

# 3 - Eventlist BLF, 4 - Speed Dial via active account, 5 - DialDTMF

# 6 - Voice Mail, 7 - Call Return, 8 - Transfer, 9 - Call Park, 10 - Intercom

# 11 - LDAP Search, 13 - Multicast Paging, 14 - Record, 15 - Call Log

# 16 - Monitored Call Park, 17 - Menu, 19 - Information, 20 - Message, 28 - Provision

# Mandatory

# P23848 = -1

# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3 

# Number: 0, 1, 2. 

# Mandatory

# P23849 = 0

# Description. 

# String. 

# P23850 = 

# Value.

# String.

# P23851 =

##################################################################################### 

# VPK 20--Dynamic VPK

######################################################################################

# Key Mode for Dynamic VPK. 

# Number: -1 -- 11, 13 - 17, 19, 20, 28

# -1 - None, 0 - Speed Dial, 1 - BLF, 2 - Presence Watcher

# 3 - Eventlist BLF, 4 - Speed Dial via active account, 5 - DialDTMF

# 6 - Voice Mail, 7 - Call Return, 8 - Transfer, 9 - Call Park, 10 - Intercom

# 11 - LDAP Search, 13 - Multicast Paging, 14 - Record, 15 - Call Log

# 16 - Monitored Call Park, 17 - Menu, 19 - Information, 20 - Message, 28 - Provision

# Mandatory

# P23852 = -1

# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3 

# Number: 0, 1, 2. 

# Mandatory

# P23853 = 0

# Description. 

# String. 

# P23854 = 

# Value.

# String.

# P23855 =

##################################################################################### 

# VPK 21--Dynamic VPK

######################################################################################

# Key Mode for Dynamic VPK. 

# Number: -1 -- 11, 13 - 17, 19, 20, 28

# -1 - None, 0 - Speed Dial, 1 - BLF, 2 - Presence Watcher

# 3 - Eventlist BLF, 4 - Speed Dial via active account, 5 - DialDTMF

# 6 - Voice Mail, 7 - Call Return, 8 - Transfer, 9 - Call Park, 10 - Intercom

# 11 - LDAP Search, 13 - Multicast Paging, 14 - Record, 15 - Call Log

# 16 - Monitored Call Park, 17 - Menu, 19 - Information, 20 - Message, 28 - Provision

# Mandatory

# P23856 = -1

# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3 

# Number: 0, 1, 2. 

# Mandatory

# P23857 = 0

# Description. 

# String. 

# P23858 = 

# Value.

# String.

# P23859 =

##################################################################################### 

# VPK 22--Dynamic VPK

######################################################################################

# Key Mode for Dynamic VPK. 

# Number: -1 -- 11, 13 - 17, 19, 20, 28

# -1 - None, 0 - Speed Dial, 1 - BLF, 2 - Presence Watcher

# 3 - Eventlist BLF, 4 - Speed Dial via active account, 5 - DialDTMF

# 6 - Voice Mail, 7 - Call Return, 8 - Transfer, 9 - Call Park, 10 - Intercom

# 11 - LDAP Search, 13 - Multicast Paging, 14 - Record, 15 - Call Log

# 16 - Monitored Call Park, 17 - Menu, 19 - Information, 20 - Message, 28 - Provision

# Mandatory

# P23860 = -1

# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3 

# Number: 0, 1, 2. 

# Mandatory

# P23861 = 0

# Description. 

# String. 

# P23862 = 

# Value.

# String.

# P23863 =

##################################################################################### 

# VPK 23--Dynamic VPK

######################################################################################

# Key Mode for Dynamic VPK. 

# Number: -1 -- 11, 13 - 17, 19, 20, 28

# -1 - None, 0 - Speed Dial, 1 - BLF, 2 - Presence Watcher

# 3 - Eventlist BLF, 4 - Speed Dial via active account, 5 - DialDTMF

# 6 - Voice Mail, 7 - Call Return, 8 - Transfer, 9 - Call Park, 10 - Intercom

# 11 - LDAP Search, 13 - Multicast Paging, 14 - Record, 15 - Call Log

# 16 - Monitored Call Park, 17 - Menu, 19 - Information, 20 - Message, 28 - Provision

# Mandatory

# P23864 = -1

# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3 

# Number: 0, 1, 2. 

# Mandatory

# P23865 = 0

# Description. 

# String. 

# P23866 = 

# Value.

# String.

# P23867 =

##################################################################################### 

# VPK 24--Dynamic VPK

######################################################################################

# Key Mode for Dynamic VPK. 

# Number: -1 -- 11, 13 - 17, 19, 20, 28

# -1 - None, 0 - Speed Dial, 1 - BLF, 2 - Presence Watcher

# 3 - Eventlist BLF, 4 - Speed Dial via active account, 5 - DialDTMF

# 6 - Voice Mail, 7 - Call Return, 8 - Transfer, 9 - Call Park, 10 - Intercom

# 11 - LDAP Search, 13 - Multicast Paging, 14 - Record, 15 - Call Log

# 16 - Monitored Call Park, 17 - Menu, 19 - Information, 20 - Message, 28 - Provision

# Mandatory

# P23868 = -1

# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3 

# Number: 0, 1, 2. 

# Mandatory

# P23869 = 0

# Description. 

# String. 

# P23870 = 

# Value.

# String.

# P23871 =

######################################################################################

## Programmable Keys/Idle Screen SoftKeys

######################################################################################

# Softkey 1

######################################################################################

# Key Mode.

# 0 - Default, 10 - Speed Dial, 14 - Speed Dial via active account, 16 - Voicemail, 

# 17 - CallReturn, 20 - Intercom, 21 - LDAP Search, 25 - Call Log, 27 - Menu, 

# 29 - Information, 30 - Message, 38 - Provision

# Number: 0,10,14,16,17,20,21,25,27,29,30,38

# Mandatory

P2987 = 0

# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4 (GXP1782/1780 only)

# Number: 0, 1, 2, 3

# Mandatory

P2988 = 0

# Description. 

# String. 

# P2989 = 

# Value.

# String.

# P2990 =

######################################################################################

# Softkey 2

######################################################################################

# Key Mode.

# 0 - Default, 10 - Speed Dial, 14 - Speed Dial via active account, 16 - Voicemail, 

# 17 - CallReturn, 20 - Intercom, 21 - LDAP Search, 25 - Call Log, 27 - Menu, 

# 29 - Information, 30 - Message, 38 - Provision

# Number: 0,10,14,16,17,20,21,25,27,29,30,38

# Mandatory

P2991 = 0

# Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4 (GXP1782/1780 only)

# Number: 0, 1, 2, 3

# Mandatory

P2992 = 0

# Description. 

# String. 

# P2993 = 

# Value.

# String.

# P2994 =

##############################################################################

##  Settings/Broadsoft XSI

##############################################################################

# Broadsoft XSI

# Server address

# String

P1591 =  

# Port

# Number

P1592 =  

# XSI Authentication Type. 0 - Login Credentials, 1 - SIP Credentials, 2 - Account 1, 3 - Account 2, 4 - Account 3, 5 - Account 4. Default is 0.

# Number: 0,1,2,3,4,5.

# Mandatory

P22054 = 0

# Login Credentials

# Login Username

# String

P1593 = 

# Login Password

# String

P1594 = 

# SIP Credentials

# SIP UserName 

# String

P6772 = 

# SIP User ID

# String

P22034 = 

# SIP Password 

# String

P6773 = 

# Network Directories

### Group Directory ###

# Disabled/Enabled. 0 - Disabled, 1 - Enabled.

# Number: 0, 1. Default is 0

# Mandatory

P2971 = 0

# Name. 

# String

P2972 = 

### Enterprise Directory ###

# Disabled/Enabled. 0 - Disabled, 1 - Enabled.

# Number: 0, 1. Default is 0

# Mandatory

P2973 = 0

# Name. 

# String

P2974 = 

### Group Common ###

# Disabled/Enabled. 0 - Disabled, 1 - Enabled.

# Number: 0, 1. Default is 0

# Mandatory

P2975 = 0

# Name. 

# String

P2976 = 

### Enterprise Common ###

# Disabled/Enabled. 0 - Disabled, 1 - Enabled.

# Number: 0, 1. Default is 0

# Mandatory

P2977 = 0

# Name. 

# String

P2978 =

### Personal Directory ###

# Disabled/Enabled. 0 - Disabled, 1 - Enabled.

# Number: 0, 1. Default is 0

# Mandatory

P2979 = 0

# Name. 

# String

P2980 =

### Missed Call Log ### 

# Disabled/Enabled. 0 - Disabled, 1 - Enabled.

# Number: 0, 1. Default is 0

# Mandatory

P2981 = 0

# Name. 

# String

P2982 =

### Placed Call Log ### 

# Disabled/Enabled. 0 - Disabled, 1 - Enabled.

# Number: 0, 1. Default is 0

# Mandatory

P2983 = 0

# Name. 

# String

P2984 =

### Received Call Log ### 

# Disabled/Enabled. 0 - Disabled, 1 - Enabled.

# Number: 0, 1. Default is 0

# Mandatory

P2985 = 0

# Name. 

# String

P2986 =

##############################################################################

##  Settings/External Service

##############################################################################

# Grandstream Door System. 

# Service Type

# Number: -1 - None, 0 - GDS. Default is 0.

# Mandatory

P32000 = 0

P32005 = 0

P32010 = 0

P32015 = 0

P32020 = 0

P32025 = 0 

P32030 = 0

P32035 = 0

P32040 = 0

P32045 = 0

# Account

# Number: 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4. Default is 0. 

# Mandatory

P32001 = 0

P32006 = 0

P32011 = 0

P32016 = 0

P32021 = 0

P32026 = 0

P32031 = 0

P32036 = 0

P32041 = 0

P32046 = 0

# System Identification

# String

P32002 = 

P32007 =

P32012 =

P32017 =

P32022 =

P32027 =

P32032 =

P32037 =

P32042 =

P32047 =

# System Number

# String

P32003 =

P32008 =

P32013 =

P32018 =

P32023 =

P32028 =

P32033 =

P32038 =

P32043 =

P32048 =

# Access Password

# String

P32004 =

P32009 =

P32014 =

P32019 =

P32024 =

P32029 =

P32034 =

P32039 =

P32044 =

P32049 =

##############################################################################

##  Settings/Outbound Notification

##############################################################################

######################################################################################

# Action URL

######################################################################################

# Setup Completed. 

# String

P8304 = 

# Registered.

# String

P8305 = 

# Unregistered.

# String

P8306 = 

# Off Hook.

# String

P8308 = 

# On Hook.

# String

P8309 = 

# Incoming Call.

# String

P8310 = 

# Outgoing Call

# String

P8311 = 

# Missed Call

# String

P8312 = 

# Established Call

# String 

P8313 = 

# Terminated Call

# String

P8314 = 

# Open DND

# String

P8316 = 

# Close DND

# String

P8317 = 

# Open Forward

# String

P8318 = 

# Close Forward

# String

P8319 = 

# Blind Transfer

# String

P8320 = 

# Attended Transfer

# String

P8321 = 

# Hold Call

# String

P8324 = 

# UnHold Call

# String

P8325 = 

##############################################################################

##  Settings/Affinity Settings

##############################################################################

# CTI Support. 0 - Disabled, 1 - Enabled. Default is 0.

# Number: 0, 1

# Mandatory

P8334 = 0

# CTI Account. 0 - Account 1, 1 - Account 2, 2 - Account 3, 3 - Account 4. Default is 0.

# Number: 0, 1, 2, 3

# Mandatory

P8335 = 0

###################################################################

## Network/Basic Settings                                        ##

###################################################################

# Internet Protocol. 0 - Both IPv4 and IPv6, 1 - Both, prefer IPv6 , 2 - IPv4 Only, 3 - IPv6 Only. Default is 2.

# Number: 0, 1, 2, 3

# Mandatory

P1415 = 0

# IPv4 Address. 0 - DHCP, 1 - Static IP, 2 - PPPoE. Default is 0

# Number: 0, 1, 2

# Mandatory

# P8 = 0

##########################################

# DHCP

##########################################

# Host name, DHCP option 12. Max length allowed is 64 characters

# String

P146 =

# Vendor Class ID, DHCP option 60. Max length allowed is 64 characters

# String

# For GXP1780, Default value is Grandstream GXP1780.

# P148 = Grandstream GXP1780

# For GXP1782, Default value is Grandstream GXP1782.

# P148 = Grandstream GXP1782

# For GXP1760, Default value is Grandstream GXP1760.

# P148 = Grandstream GXP1760

##########################################

# PPPoE

##########################################

# PPPoE Account ID

# String

P82 =

# PPPoE Password

# String

# Cannot contain ` or "

P83 =

# PPPoE Service Name

# String 

P269 =

##########################################

# Statically Configured

##########################################

# IP Address. Ignore if DHCP or PPPoE is used

# Number: 0 - 255

P9 = 192

# Number: 0 - 255

P10 = 168

# Number: 0 - 255

P11 = 0

# Number: 0 - 255

P12 = 160

# Subnet mask. Ignore if DHCP or PPPoE is used

# Number: 0 - 255

P13 = 255

# Number: 0 - 255

P14 = 255

# Number: 0 - 255

P15 = 0

# Number: 0 - 255

P16 = 0

# Gateway. Ignore if DHCP or PPPoE is used

# Number: 0 - 255

P17 = 0

# Number: 0 - 255

P18 = 0

# Number: 0 - 255

P19 = 0

# Number: 0 - 255

P20 = 0

# DNS 1 Server. Ignore if DHCP or PPPoE is used

# Number: 0 - 255

P21 = 0

# Number: 0 - 255

P22 = 0

# Number: 0 - 255

P23 = 0

# Number: 0 - 255

P24 = 0

# DNS 2 Server. Ignore if DHCP or PPPoE is used

# Number: 0 - 255

P25 = 0

# Number: 0 - 255

P26 = 0

# Number: 0 - 255

P27 = 0

# Number: 0 - 255

P28 = 0

# Preferred DNS server.  (if specified).

# Number: 0 - 255

P92 = 0

# Number: 0 - 255

P93 = 0

# Number: 0 - 255

P94 = 0

# Number: 0 - 255

P95 = 0

# IPv6 Address. 0 - Auto Configured, 1 - Statically Configured. Default is 0.

# Number: 0, 1

# Mandatory

P1419 = 0

# IPv6 Address type: Statically configured. 0 - Full Static, 1 - Prefix Static

# Number: 0, 1

P1426 = 0

# Full Static: Static IPv6 Address

P1420 =

# Full Static: IPv6 Prefix Length

P1421 =

# Prefix Static: IPv6 Prefix (64bits)

P1422 =

# DNS Server 1 for IPv6 Address

# String: a-z, A-Z, 0-9, ".", ":", "[", "]"

P1424 =

# DNS Server 2 for IPv6 Address

# String: a-z, A-Z, 0-9, ".", ":", "[", "]"

P1425 =

# Preferred DNS Server for IPv6 Address

# String: a-z, A-Z, 0-9, ".", ":", "[", "]"

P1423 =

##############################################################################

## Network/Advanced Settings                                                ##

##############################################################################

# 802.1X Mode. 0 - Disable, 1 - EAP-MD5. 2 - EAP-TLS, 3 - EAP-PEAPv0/MSCHAPv2. Default is 0

# Number: 0, 1, 2, 3

# Mandatory

P7901 = 0

# 802.1X Identity. Max length allowed is 64 characters

# String

P7902 = 

# MD5 Password. Max length allowed is 64 characters

# String

P7903 =

# HTTP Proxy

# String

P1552 =

# HTTPS Proxy

# String

P1553 =

# Layer 3 QoS for SIP

# Number:0 - 63

# Mandatory

P1558 = 26 

# Layer 3 QoS for RTP

# Number:0 - 63

# Mandatory

P1559 = 46 

# Layer 2 QoS 802.1Q/VLAN Tag (VLAN classification for RTP). Default is 0

# Number: 0 - 4094

# Mandatory

P51 = 0

# Layer 2 QoS 802.1p Priority Value (0 - 7). Default is 0

# Number: 0 - 7

# Mandatory

P87 = 0

# PC Port Mode. 0 - Enable, 1 - Disabled, 2 - Mirrored. Default is 0

# Number: 0, 1, 2

# Mandatory

P1348 = 0

# PC Port VLAN Tag. Default is 0 

# Number: 0 - 4094

#Mandatory

P229 = 0

# PC Port Priority Value. Default is 0 

# Number: 0 - 7

# Mandatory

P230 = 0

# Enable LLDP.  0 - Disabled, 1 - Enabled. Default is 1

# Number: 0, 1

# Mandatory

P1684 = 1

###############################################################

# Network/Remote Control

###############################################################

# CSTA Control

# Number: 0 - Disabled, 1 - Enabled. Default is 0.

# Mandatory

P32053 = 0

##############################################################################

## Network/OpenVPN Settings                                                 ##

##############################################################################

# OpenVPN Enable.  0 - No, 1 - Yes. Default is 1

#Number: 0, 1 

#Mandatory

P7050 = 0

# OpenVPN Server Address

# String

P7051 =

# OpenVPN Port. Default is 1194

# Number

# Mandatory

P7052 = 1194

# OpenVPN Transport.  0 - UDP, 1 - TCP. Default is 0

#Number: 0, 1 

#Mandatory

P2912 = 0

# OpenVPN CA.

# Strings

P9902 = 

# OpenVPN Certificate.

# Strings

P9903 = 

# OpenVPN Client Key.

# Strings

P9904 = 

###############################################################

# Network/WiFi Settings o<�Only for GXP1760W)

###############################################################

# Enable / Disable Wifi. Default is 0. 

# Number: 0, 1

# Mandatory

P7800 = 0

## Access Point 1

# SSID

# String

P8403 =

# Password

# String

P8404 =

# Security Type. Default is 0.

# Number: 0, 1, 4, 5, 8

# Mandatory

P8405 = 0

## Access Point 2

# SSID

# String

P8406 =

# Password

# String

P8407 =

# Security Type. Default is 0.

# Number: 0, 1, 4, 5, 8

# Mandatory

P8408 = 0

## Access Point 3

# SSID

# String

P8409 =

# Password

# String

P8410 =

# Security Type. Default is 0.

# Number: 0, 1, 4, 5, 8

# Mandatory

P8411 = 0

## Access Point 4

# SSID

# String

P8412 =

# Password

# String

P8413 =

# Security Type. Default is 0.

# Number: 0, 1, 4, 5, 8

# Mandatory

P8414 = 0

## Access Point 5

# SSID

# String

P8415 =

# Password

# String

P8416 =

# Security Type. Default is 0.

# Number: 0, 1, 4, 5, 8

# Mandatory

P8417 = 0

## Access Point 6

# SSID

# String

P8418 =

# Password

# String

P8419 =

# Security Type. Default is 0.

# Number: 0, 1, 4, 5, 8

# Mandatory

P8420 = 0

## Access Point 7

# SSID

# String

P8421 =

# Password

# String

P8422 =

# Security Type. Default is 0.

# Number: 0, 1, 4, 5, 8

# Mandatory

P8423 = 0

## Access Point 8

# SSID

# String

P8424 =

# Password

# String

P8425 =

# Security Type. Default is 0.

# Number: 0, 1, 4, 5, 8

# Mandatory

P8426 = 0

## Access Point 9

# SSID

# String

P8427 =

# Password

# String

P8428 =

# Security Type. Default is 0.

# Number: 0, 1, 4, 5, 8

# Mandatory

P8429 = 0

## Access Point 10

# SSID

# String

P8430 =

# Password

# String

P8431 =

# Security Type. Default is 0.

# Number: 0, 1, 4, 5, 8

# Mandatory

P8432 = 0

# Country. Default is AL. (US Model does not have this)

# String: (Country Code)

# Mandatory

# P7831 = AL

##############################################################################

##  Maintenance/Web Access                                                 ##

##############################################################################

# End User Password

# String: a-z, A-Z, 0-9

# P196 =

# Admin password for web interface

# String: a-z, A-Z, 0-9

# P2 = 649 (NDP)

##############################################################################

##  Maintenance/Upgrade and Provisioning

##############################################################################

# Firmware Upgrade and Provisioning

# 0 - Always Check For New Firmware

# 1 - Check New Firmware only when F/W pre/suffix changes

# 2 - Always Skip the Firmware Check

# Number: 0, 1, 2

# Mandatory

P238 = 0

# Always Authenticate Before Challenge. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P20713 = 0

# Allow DHCP Option 43 and Option 66 to override server. 0 - No, 1 - Yes. Default is 1

# When set to Yes(1), it will override the configured provision path and method

# Number: 0, 1

# Mandatory

P145 = 1

# Additional Override DHCP Option. 0 - None,  1 - Option 150,  2 - Option 160. Default is 0

# Number: 0, 1, 2

# Mandatory

P8337 = 0

# Allow DHCP Option 120 to Override SIP Server.

# 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P1411 = 0

# 3CX Auto Provision. 0 - No, 1 - Yes. Default is Yes

# Number: 0, 1

# Mandatory

P1414 = 1

# Automatic Upgrade. 

# 0 - No, 

# 1 - Yes, check for upgrade based on minute(s) setting,

# 2 - Yes, check for upgrade based on Hour of Day setting,

# 3 - Yes, check for upgrade based on Day of Week setting,

# Default is No

# Number: 0, 1, 2, 3

# Mandatory

P194 = 0

# Check for new firmware every () minutes. Default is 7 days.

# Number: 60-86400

# Mandatory

P193 = 1008

# Randomize Automatic Upgrade

# Number: 0 - No, 1 - Yes. Default is 0.

# Mandatory

P8458 = 0

# Hour of the Day--Start (0-23). Default is 1

# Number: 0 - 23

# Mandatory

P285 = 1

# Hour of the Day--End (0-23). Default is 0

# Number: 0 - 23

P8459 = 0

# Day of the Week (0-6). Default is 1

# Number: 0-6

P286 = 1

# Disable SIP NOTIFY Authentication. 0 - No, 1 - Yes. Default is 0

# Number: 0,1

# Mandatory

P4428 = 0

# Config

# Config Upgrade Via. 0 - TFTP, 1 - HTTP, 2 - HTTPS. Default is 1

# Number: 0,1

# Mandatory

P212 = 1 (NDP)

# Config Server Path

# String

P237 = sipcfg.io/cfg (NDP)

# Config HTTP/HTTPS User Name

# String

P1360 =

# Config HTTP/HTTPS Password

# String

P1361 =

# Config File Prefix

# String

P234 =

# Config File Postfix

# String

P235 =

# XML Config File Password

# String

P1359 =

# Authenticate Conf File. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P240 = 0

# Firmware

# Firmware Upgrade Via. 0 - TFTP, 1 - HTTP, 2 - HTTPS. Default is 1

# Number: 0,1

# Mandatory

P6767 = 2

# Firmware Server Path

# String

P192="sonictel-prov-files.s3.us-east-2.amazonaws.com/Grandstream-GXP1760W-1-0-1-106"

# Firmware HTTP/HTTPS User Name.

# String

P6768 =

# Firmware HTTP/HTTPS Password.

# String

P6769 =

# Firmware File Prefix

# String

P232 =

# Firmware File Postfix

# String

P233 =

##############################################################################

##  Maintenance/Syslog

##############################################################################

# Syslog Protocol

# 0 - UDP, 1 - SSL/TLS. Default is 0

# Number: 0, 1

# Mandatory

P8402 = 0

# Syslog Server (name of the server, max length is 64 characters)

# String

P207 =

# Syslog Level. 0 - NONE, 1 - DEBUG, 2 - INFO, 3 - WARNING, 4 - ERROR. Default is 0

# Number: 0, 1 , 2, 3, 4

# Mandatory

P208 = 0

# Send SIP Log. 0 - Do not send SIP log in Syslog, 1 - Send SIP log in Syslog if configured and set to DEBUG level. Default is 0

# Number: 0, 1

# Mandatory

P1387 = 0

# Auto Recover from Abnormal. 0 - No, 1 - Yes. Default is 1

# Number: 0, 1

# Mandatory

P1438 = 1

# USB Console Log. 0 - No, 1 - Yes. Default is 0 

# Number: 0, 1

# Mandatory

P2922 = 0

##############################################################################

##  Maintenance/Language

##############################################################################

# Display Language. Default is Auto

# ar - Arabic, cz - Czech, de - Deutsh

# en - English, es - Spanish, fr - Francais

# he - Hebrew, hr - Hrvatski, hu - Magyar 

# it - Italiano, ja - japanese, ko - korean, lv - latvian

# nl - Dutch, pl - Polski, pt - Portugue

# ru - Russian, sl - Slovenian, se - Svenska, tr - Turkish

# zh-tw - traditional chinese, zh - simplified chinese, auto - Automatic

# gxp - Downloaded Language

# String

# Mandatory

P1362 = Auto

##############################################################################

##  Maintenance/TR-069

##############################################################################

# ACS URL

# String

# P4503 =

# TR-069 Username

# String

P4504 =

# TR-069 Password

# String

P4505 =

# Periodic Inform Enable. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P4506 = 0

# Periodic Inform Interval. Default is 86400.

# Number

P4507 = 86400

# Connection Request Username    

# String: a-z, A-Z, 0-9

P4511 =

# Connection Request Password    

# String: a-z, A-Z, 0-9

P4512 =

# Connection Request Port. Default is 7547.

# Number

P4518 = 7547

# CPE SSL Certificate

# String: a-z, A-Z, 0-9

P8220 =

# CPE SSL Private Key

# String: a-z, A-Z, 0-9

P8221 =

##############################################################################

##  Maintenance/Security Settings/Security                                  ##

##############################################################################

# Configuration Via Keypad Menu. 0 - Unrestricted, 1 - Basic settings only, 2 - Constraint mode, 3 - Locked Mode. Default is 0

# Number: 0, 1, 2, 3

# Mandatory

P1357 = 0

# Enable STAR key Keypad locking. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P1382 = 0

# Password to Lock/Unlock (0-9 only)

# Number

P1383 =

# Validate Server Certificates

# Number: 0 - No, 1 - Yes. Default is 0. 

# Mandatory

P8463 = 0

# SIP TLS Certificate

# String: a-z, A-Z, 0-9

#P280 =

# SIP TLS Private Key

# String: a-z, A-Z, 0-9

#P279 =

# SIP TLS Private Key Password

# String: a-z, A-Z, 0-9

P281 = 

# Custom Certificate

# String

#P8472 =

# Web Access Mode. 0 - HTTPS, 1 - HTTP, 2 - Disabledo< 3 - Both HTTP and HTTPS. Default is 1

# Number: 0, 1, 2

# Mandatory

P1650 = 1

# Disable SSH. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

P276 = 0

# Web/Keypad/Restrict mode Lockout Duration (0-60 minutes). Default is 5

# Number: 0-60

P1683 = 5

# Minimum TLS Version. 10 - TLS 1.0, 11 - TLS 1.1, 12 - TLS 1.2. Default is 11

# Number: 10, 11, 12

# Mandatory

P22293 = 11

# Maximum TLS Version. 99 - Unlimited, 10 - TLS 1.0, 11 - TLS 1.1, 12 - TLS 1.2. Default is 99

# Number: 99, 10, 11, 12

# Mandatory

P22294 = 99

# Enable/Disable Weak Ciphers. Default is 0

# 0 - Enable Weak TLS Ciphers Suites

# 1 - Disable Symmetric Encryption RC4/DES/3DES

# 2 - Disable Symmetric Encryption SEED

# 3 - Disable All Weak Symmetric Encryption

# 4 - Disable Symmetric Authentication MD5

# 5 - Disable All Weak TLS Cipher Suites

# Number: 0 - 5

P8536 = 0

##############################################################################

##  Maintenance/Security Settings/Trusted CA Certificates                   ##

##############################################################################

# Trust CA Certificate

# String

# P8433 =

# P8434 =

# P8435 =

# P8436 =

# P8437 =

# P8438 =

# Load CA Certificates. 0 - Default Certificates, 1 - Custom Certificates, 2 - All Certificates. Default is 2

# Number: 0, 1, 2

# Mandatory

P8502 = 2

##############################################################################

##  Maintenance/Packet Capture                                              ##

##############################################################################

# Capture Location. 0 - Internal Storage, 1 - USB. Default is 0

# Number: 0, 1.

# Mandatory

P2999 = 0

# With RTP Packets. 0 - No, 1 - Yes. Default is 0

# Number: 0, 1

# Mandatory

P6007 = 0

# USB Filename

# String

P6008 =

##############################################################################

##  Phonebook/Phonebook Management

##############################################################################

# Enable Phonebook XML Download. 

# 0 - Disabled, 1 - Enabled, use HTTP, 2 - Enabled, use TFTP, 3 - Enabled, use HTTPS. Default is 0

# Number: 0, 1, 2, 3

# Mandatory

P330 = 0

# HTTP/HTTPS User Name

# String

P6713 =

# HTTP/HTTPS Password.

# String

P6714 =

# Phonebook XML Server Path

# This is a string of up to 256 characters that should contain a path to the XML file. It MUST be in the host/path format.

# For example: directory.grandstream.com/engineering

# String

P331 =

# Phonebook Download Interval (in minutes)

# Valid value range is 5-720. Default is 0 for disabled

# Number: 0, 5-720; 

P332 = 0

# Remove Manually-edited Entries on Download. 0 - No, 1 - Yes. Default is 1

# Number: 0, 1

# Mandatory

P333 = 1

# Import Group Method. 0 - Replace, 1 - Append. Default is 0

# Number: 0, 1

# Mandatory

P8462 = 0

# Sort Phonebook by. 0 - Last Name, 1 - First Name. Default is 0

# Number: 0, 1

# Mandatory

P2914 = 0

# Phonebook Key Function. 0 - Default, 1 - LDAP Search, 2 - Local Phonebook, 3 - Local Group, 4 - Broadsoft Phonebook

# Number: 0, 1, 2, 3, 4.

# Mandatory

P1526 = 0

##############################################################################

##  Phonebook/LDAP

##############################################################################

# LDAP Server Address, up to 256 characters can be used. It can be IP address or Domain name

# String

P8020 = 

# LDAP Server Port. Default is 389.

# Number: 1 - 65535

P8021 = 389

# Base. The LDAP search base refers to the location in the directory where the search is requested to begin

# Example 1: dc=grandstream,dc=com

# Example 2: ou=Boston, dc=grandstream,dc=com

# String

P8022 =

# User name. The bind "Username" for querying LDAP servers. Some LDAP servers allow anonymous binds in which case the setting can be left blank

# String

P8023 =

# Password. The bind "Password" for querying LDAP servers. And the field can be left blank if the LDAP server allows anonymous binds

# String

P8024 =

# LDAP Number Filter

# LDAP name filter is the filter used for name look ups. Please refer to user manual for examples

# String

P8025 =

# LDAP Name Filter

# LDAP name filter is the filter used for name look ups. Please refer to user manual for examples

# String

P8026 =

# LDAP Version. Protocol version for the phone when send the bind requests

# 2 - version 2, 3 - version 3. Default is 3

# Mandatory

P8027 = 3

# LDAP Name Attributes. This setting specifies the "name" attributes of each record which are returned in the LDAP search result

# The setting allows the users to configure multiple space separated name attributes

# String

P8028 =

# LDAP Number Attributes. This setting specifies the b