ALGO Paging has a family of paging adapters & speakers.

The ALGO 8186 is the Paging Horn and has built-in SIP

ALGO 8188 Ceiling Mount  and has built-in SIP (Drop Ceiling)

ALGO 8189 Ceiling Mount  and has built-in SIP (Surface Ceiling)

ALGO 8180 Surface Mount Paging Box with built-in SIP

Each COST APPROX $299.00 8-WATTS / 106dB Ring Tones

Also see ALGO 8301, COST $365.00 Note this unit does not have a built-in speaker 

Wideband IP Voice Paging, Loud Ringing & Notification Alerting PoE Wall Speaker

The 8180 is a SIP compliant wall mount indoor speaker designed for voice paging, loud ringing, and emergency/safety/security notification and alerting. The speaker is PoE and does not require an additional amplifier. Common application environments include: classroom, factory (e.g., OSHA), warehouse, utility plant, machine shop, garage, lunch room, kitchen, etc.

Wideband G.722 codec (HD voice) support in the speaker provides optimum speech clarity and intelligibility. Voice paging and emergency announcements can be easier to understand with wideband, particularly in a noisy environment. The wideband capability of the speaker improves STI-PA intelligibility scores, which is important in meeting NFPA 72 requirements and the NEMA SB-40 2010 standard for emergency communication in education.

The 8180 speaker registers as a 3rd party SIP endpoint with most hosted / cloud or premise VoIP telephone systems. For ease and simplicity, the 8180 can announce its static or DHCP IP address so access to an intuitive web interface makes configuring the device straight forward. Additionally, the speaker supports auto-provisioning for minimal touch configuration.

For multiple speaker deployments, additional devices do not require a SIP license. A single registered speaker can be configured to multicast to any number and mix of additional Algo speakers, strobes and/or paging adapters as required, providing cost effective scalability using a minimum of network traffic. For multicast page applications, zoned paging is supported as a SIP extension (50) or as a keypress selectable zone. The 8180 supports RTP, Polycom Group Page, InformaCast and SA-Announce multicast types.

Where a IP telephone supports send/receive multicast, these devices may be configured to join the multicast including Algo IP speakers for providing additional coverage in a room/building environment. Audio will be streamed to all endpoints simultaneously. There is no limit to the number and combination of endpoints configured in a multicast.

An integrated microphone in the speaker enables talkback. The microphone also has the capability to listen for ambient noise and automatically increase page volume when necessary. This feature enables a consistent ratio of page to ambient noise level without being unnecessarily loud.

Several audio files are pre-loaded into the 8180 internal memory for loud ringing / night bell applciations, however, users may also record or upload custom audio files, music, sound effects, or voice announcements if desired. Up to 10 Ring extensions are available to register on a single speaker, thereby allowing a single speaker to act as a alerter for several telephones by configuring different ring groups for each registered extension. The 8180 is typically eight times louder than a telephone speaker. If the optional 1186 Horn Speaker is used then the volume is twenty times louder. Available outputs on the 8180 include: external speaker (8 ohm), audio output for a slave amplifier, and relay output (e.g. Algo strobes or visual alerter).

Emergency Notification Alerting

For notification alerting there are two activation options available - dial an extension or connect a button to the speaker's relay input. Up to 10 Emergency Alert extensions are available to register on a single speaker allowing for different types of alerts to be activated (e.g., lockdown, evacuation, shelter, all clear, etc.). Custom WAV files can be uploaded to device memory (1GB). A Call To Cancel feature is available to allow the emergency alert to play continuously for the duration of the event, if desired. Alternatively, the alert can be configured to play for the duration of the WAV file.

Any button providing a contact closure, including the Algo 1202 and 1203, can be wired to the speaker as an alternative option for emergency alerting. Three configuration options are available to configure on the relay input:

• Multicast an alert
• Call a target extension and play a discrete WAV file
• Call a target extension and have a two-way call via the speaker's microphone

Any combination and number of Algo IP endpoints can be configured as a multicast for emergency alerting to cover any size room, building, campus or enterprise.

Please contact Algo for assistance with unique applications.

Benefits

• Superb audio clarity and intelligibility
• Network managed and supervised SIP and multicast endpoint
• PoE (802.3af) for plug and play network connectivity - no additional amplifier needed
• Eliminates narrowband FXS port or ATA
• Multicast to scale from one to many speakers
• Multifunctional speaker for voice paging, loud ringing, emergency notification alerting and bell scheduling applications
• Compatible with all varieties of Algo speakers, paging adapters and strobes for more comprehensive alerting solution requirements
• 
  

Features

• Wideband G.722 codec support for HD Voice
• Multicast receive or broadcast capability
• Mix with any number and model of Algo speakers, strobes and/or paging adapters using multicast (e.g. 8128, 8180, 8186, 8188, 8189, 8301, 8373) for a complete voice paging system
• Supports RTP, Polycom Group Page, InformaCast and SA-Announce multicast types
• SIP compatibility with all leading UC vendors including: Avaya, Broadsoft, Cisco, Digium/Asterisk, Mitel, Metaswitch, NEC, Polycom and Yealink to name a few
• Configurable through web interface
• Auto-provisioning (i.e., TFTP, FTP, HTTP, HTTPS). Also supported: TLS & SRTP (secure SIP signalling and media), SIP over TCP (allows increased packet size over UDP), DNS SRV Record, and CDP/LLDP automatic VLAN assignment.
• SNMP supervision
• Internal memory of 1GB for uploaded WAV files or recorded messages
• Multiple SIP registrations for Page (50), Emergency Alert (10) and Ring (10) extensions
• Outputs for external speaker, slave amplifier (not isolated and balanced), or strobe/visual alerter
• Pre-loaded with several ring tones including bell, chime, gong, buzzer, warble, and dogs (Note: custom WAV files can be uploaded to the device)
• UL/CSA, FCC, CE
• Dimensions: 7" x 4" x 2.6" (17.8cm x 10.2cm x 6.5cm)

Applications

• IP loud ringer, indoors, for high noise environments or where employees are wearing hearing protection (e.g., machine shop, garage, manufacturing plant, utility, farm, etc.)
• IP voice paging in a classroom, office, retail store, etc.
• Multicast wide area emergency, safety and security notification alerts (e.g., lockdown, evacuation, reverse evacuation, medical emergency, safety alert, etc.)
• OSHA compliance
• Scheduled or automated announcements. Using the Algo 8301 to multicast, announcements/tones can be played over any model of Algo IP speaker. For example, school (i.e., class changes, recess, playing an anthem, etc.), retail and healthcare announcements (i.e., store closing, visiting hours, etc.), and workplace shift changes, breaks, etc.
• Combine with all variety of Algo visual and audible IP endpoints to create more comprehensive notification alerting solutions (e.g. 8128, 8180, 8186, 8188, 8189, 8301, 8373)

Ordering Guide

Note: When an external speaker is connected to the 8180, the internal 8180 speaker is disabled due to available PoE power.

Algo IP Endpoint Product Suite

8301 Paging Adapter & Scheduler

The Algo 8301 is a PoE IP Paging Adapter for integrating analog voice paging systems into a hosted or premise UC environment as a third party SIP endpoint. Features include G.722 Wideband HD voice support with isolated and balanced line output for optimum clarity and intelligibility without hum or noise. The 8301 also features a Scheduler for automating the  playing and multicasting of WAV file tones, bells, announcements, music, etc. The Scheduler uses the NTP server to synchronize with IP clocks, and is ideal for schools (i.e. class changes, recess, etc.), retail and healthcare announcements (e.g. store closing, visiting hours, etc.), and workplace shift changes, breaks, etc. 1GB of memory is available for storing WAV files. The 8301 supports RTP, Polycom Group Page, InformaCast and SA-Announce multicast types.  
Learn More

8373 Zone Paging Adapter

The 8373 is a PoE IP Zone Paging Adapter for integrating zoned analog voice paging systems into a hosted or premise UC environment as a third party SIP endpoint. The 8373 eliminates the need for a legacy zone controller. The adapter features include G.722 Wideband HD voice support with isolated and balanced line output for optimum clarity and intelligibility without hum or noise. The 8373 supports RTP multicast and Polycom Group Page. For scalability, multiple 8373 adapters can be used to support as many page zones as required from a single amplifier.  
Learn More

8201 SIP PoE Intercom

The 8201 is a one piece PoE design alternative to the popular 8028 SIP Doorphone. This IP intercom is in a compact form factor, and provides  hands-free two-way voice communication for interior and exterior secured entrances and access points. It is also well suited for other types of intercom communication in classrooms and offices. The 8201 features door opening control for telephone keypad activation of entry into a secure location or entrance. The device registers as a third party SIP endpoint into a hosted or premise UC environment. Wideband G.722 codec support provides optimum speech clarity and intelligibility for critical safety, security or emergency applications where reliable voice communication is a primary consideration.  
Learn More

8190 SIP Classroom Speaker - Clock

The 8190 is a versatile PoE wideband speaker-clock that is a compliant 3rd party SIP endpoint. The product is designed for public address (PA) voice paging and emergency alerting, and is compatible with most hosted / cloud and premise-based VoIP telephone systems. Although the 8190 is most suited for education, the speaker can also be deployed in any application environment requiring crisp clear audio with high visibility clock (e.g. manufacturing / plant / utility, government, healthcare, transport terminals, etc.). The 8190S model offers discrete LEDs including amber, blue, green and red (+ white using RGB) for visual alerting of safety, security and emergency events.  
Learn More

8189 SIP Surface Mount Speaker

The Algo 8189 is identical to the 8188 SIP Ceiling Speaker, however, it is a slimmer design better suited for indoor surface mount ceiling or wall applications. The 8189 is a PoE Wideband IP speaker for voice paging and notification alerting (e.g. safety, security, emergency events, OSHA, etc.). This endpoint registers as a third party SIP device into a hosted or premise UC environment.  The speaker is suited for schools, hospitals, offices, retail, etc. The 8189 supports RTP, Polycom Group Page, InformaCast and SA-Announce multicast types. Any number and combination of Algo IP speakers, paging adapters and strobes can be used in a multicast for more comprehensive large scale enterprise or campus deployments. The 8189 supports full zoning capabilities. Talkback is supported, and ambient noise monitoring for automatic volume control of the speaker based on background noise levels.  
Learn More

8188 SIP Ceiling Speaker

The Algo 8188 is a PoE Wideband IP ceiling speaker designed for voice paging, notification alerting (e.g. safety, security, emergency events, OSHA, etc.), and background music. This endpoint registers as a third party SIP device into a hosted or premise UC environment.  The speaker is suited for air handling spaces in a drop ceiling  (UL2043) such as schools, hospitals, offices, etc., or used in a suspended application such as retail. The 8188 supports RTP, Polycom Group Page, InformaCast and SA-Announce multicast types. Any number and combination of Algo IP speakers, paging adapters and strobes can be used in a multicast for more comprehensive large scale enterprise or campus deployments. The 8188 supports full zoning capabilities. Talkback is supported, and ambient noise monitoring for automatic volume control of the speaker based on background noise levels.  
Learn More

8186 SIP Horn Speaker

The 8186 is a PoE outdoor rated Wideband IP horn speaker. This endpoint registers as a third party SIP device into a hosted or premise UC environment. The horn speaker is designed to provide voice paging, loud ringing, and notification alerting (e.g., safety, security & emergency events, OSHA, etc.). The speaker is well suited for outdoor applications, wide area spaces and/or high noise environments such as a warehouse, plant or production floor, machine shop, garage, outdoor yard, car lot, utility, farm, etc. The 8186 supports RTP multicast, Polycom Group Page, InformaCast and SA-Announce multicast types. Any number and combination of Algo IP speakers, paging adapters and strobes can be used in a multicast for more comprehensive large scale enterprise or campus deployments. The 8186 supports full zoning capabilities. Talkback is supported, and ambient noise monitoring for automatic volume control of the speaker based on background noise levels.  
Learn More

8180 SIP Audio Alerter

The 8180 SIP Audio Alerter is a PoE Wideband wall mount speaker. The device is designed for indoor use for applications such as: voice paging, loud ringing (e.g. machine shop, warehouse, plant) and alert notification (e.g. safety, security, emergency events, OSHA, etc.). This endpoint registers as a third party SIP device into a hosted or premise UC environment. The 8180 supports RTP, Polycom Group Page, InformaCast and Syn-Apps SA Announce multicast types. Any number and combination of Algo IP speakers, paging adapters and strobes can be used in a multicast for more comprehensive large scale enterprise or campus deployments. The 8180 supports full zoning capabilities. Talkback is supported, and ambient noise monitoring for automatic volume control of the speaker based on background noise levels.    
Learn More

8128 SIP Strobe Light

The 8128 LED Strobe Light is a SIP compliant PoE device designed for alerting and notification of telephone, emergency, safety and security events (e.g. OSHA, ADA), particularly in noisy and noise sensitive environments. The strobe offers 16 configurable flash patterns/intensities, and four color options to suit any application requirement. The strobe supports RTP multicast, and can be deployed in any number for mass notification applications. The 8128 will also work with all variety of Algo IP endpoint speakers and paging adapters to provide a comprehensive solution for large enterprise or campus deployments. When properly installed, the 8128 can be used outdoors.  
Learn More

8061 IP Relay Controller

The 8061 is a SIP PoE interface module for the Algo 1202 Call Button, and door opening controller for the 8036, 8039 and 8201 intercoms.  
Learn More

8039 SIP Video Intercom

The 8039 is an IP video intercom designed as a rugged narrow form factor endpoint for installation on mullion door frames. This PoE intercom can also be surface mounted for any entrance security application indoors or out. The 8039 features Wideband audio and wide-angle 187 degree video capability to enhance visitor communication and security in education, healthcare, professional office, hospitality, and a host of other environments. A configurable keypad on the 8039 features auto-attendant capability. The intercom supports door opening control for telephone keypad activation of entry into a secure location or entrance. The 8039 registers as a third party SIP endpoint into a hosted or premise UC environment.  
Learn More

8036 SIP Multimedia Intercom

The 8036 is a PoE SIP compliant  audio and video intercom. The endpoint is designed for applications where an IP telephone is not suitable in outdoor or public access locations such as a lobby, building or gate entrance, parking log, etc. The intercom is compatible with any hosted or premise UC platform as a third party SIP endpoint. The 8036 features Wideband G.722 audio, and 5.7" sunlight viewable touch screen which can be customized with any text, image and content to suit application requirements. Door control can be integrated with the Algo 8061 IP Relay Controller.  
Learn More

8028 SIP Doorphone

The 8028 is an outdoor rated IP intercom compatible with any hosted or premise UC platform as a third party SIP endpoint. The 8028 intercom assists communication and entry for guests and visitors through secure entrances, gates and other access points. The product is also well suited for emergency and other intercom communication applications (e.g. elevator, lab, hospital ward, and interview or examination room). Features include integrated door opening control activated from the convenience of a telephone keypad. The 8028 uses a single twisted pair to connect the intercom station to a controller. Where twisted pair is already in place, this makes the 8028 an easy retrofit of a legacy analog intercom.  
Learn More