How to upgrade firmware Obihai Obi Devices

Modified on Tue, Sep 13, 2016 at 7:44 PM

 

How do I automate upgrades to the most current available firmware?

You may configure your OBi device to periodically check for new firmware updates.
When an update becomes available, the OBi will automatically download and install the update.

Sign-in to OBiTALK and choose your OBi device.
Navigate to and enter the OBi Expert Configuration page for your device.
Go to the System Management -> Auto Provisioning section of the web page.

Modify the Auto Firmware Update parameters as follows:

Set Method = Periodically
Set Interval = a numeric value in seconds. For example, enter 86400 to check on a daily basis.

For OBi1 Series:
Set FirmwareURL = http://www.obihai.com/firmware/OBi-latest.fw

For OBi2 and OBi3 Series:
Set FirmwareURL = http://www.obihai.com/firmware/OBi2-latest.fw

For OBi5vs Series:
Set FirmwareURL = http://www.obihai.com/firmware/OBi5-latest.fw

For OBi1000 Series:
Set FirmwareURL = http://www.obihai.com/firmware/OBiPhone-latest.fw
Click "Submit" at the bottom of the page.

Troubleshooting


How do I perform a factory reset?

The OBi phone LED is not on. What does that mean?

The OBi phone LED is constantly blinking green. What does that mean?

My audio is breaking-up and choppy.

I can make outgoing calls, but I cannot receive any incoming calls.

Add Device does not work when doing **5 during OBiTALK set-up.

Why am I having trouble registering with my SIP service provider and/or I am not able to hear the far-end partys audio but they can hear me?

What ports should I keep open on my router/firewall?

What does the red/green power light indicate?

I have Motorola SBG900 router/modem. What do I configure?

How do I make incoming calls ring on my OBis phone, but also the soft phone or another OBi No.?

The OBi power LED is red. What do I do?

I hear a humming/buzzing sound from my corded phone. What should I do?

How do I configure a static IP address?

How do I make a call to a SIP URI address?

How do I make a call to an IP address from the phone attached to my OBI device?

What might I need to use a UK analog phone handset with my OBi?

How to do I set-up and collect a syslog from an OBi device?

Is there anyone I can contact if I have a problem that is not covered in the forum or this FAQ?

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article