Panasonic NS700 Connecting PC for Programming

Connecting to Web Maintenance Console (On-line Mode)

192.168.0.101 or MNT Port 223.0.0.0.1

Below is the procedure for connecting to Web Maintenance Console to program in On-line mode:

1. Connect the PC to the PBX:
• Connect the PBX to a network with the LAN port and access the PBX from a PC in your LAN or VPN.
• Connect the PBX to a network with the LAN port and access the PBX from a PC using an Internet
connection.

2. Access Web Maintenance Console:

MNT Port connection:
Launch your Web browser and in the address bar, enter one of the following addresses exactly as shown:
– 223.0.0.1
or
Document Version 2014-11 PC Programming Manual 19
1.2.1 Starting Web Maintenance Console
– http://kx-ns700.
Note
• If entering "http://kx-ns700.", be sure to include the period at the end as shown.
• If connecting using 223.0.0.1 takes a long time, configure a static IP address for the PC.

LAN or VPN connection:
Launch your Web browser and input the IP address of the PBX followed by the Web Maintenance Console
port number into the address bar. The input method will differ according to the PC’s connection to the PBX.
The default IP address for the LAN port of the PBX is 192.168.0.101, and the default Web Maintenance
Console port number is 80. Accordingly, the address to enter to connect to the PBX for the first time will
be as follows (enter the address exactly as shown):
http://192.168.0.101
Internet connection (SSL Connection):
When the PC is accessing the PBX from a connection over the Internet,