Sonicwall Firewall Settings
Print
Modified on: Fri, Feb 19, 2016 at 2:42 AM
Sonicwall Firewall Settings
NOTE: If LAN to WAN and WAN to LAN are already setup to (Source: ANY, Destination: ANY, there's no need to do the settings)
Summary |
Instruction on how to open up the C9P VoIP service-ports on the SonicWall |
Details |
This article will guide you on how to configure the SonicWall, to allow the Cloud9Phone traffic into your network. IMPORTANT: Changing your router's configuration is critical. For more information in configuring your router's settings, contact your router manufacturer for advanced support.
Accessing the router interface
Step 1:
Enter the router's IP address in the address bar of your web browser.
NOTE: To learn how to check your router's IP address, refer to your router documentation or contact your router manufacturer for support.
Step 2:
Enter your router's username and password.
Configuring the SonicWall Router's Firewall Settings
Step 1:
Go to Network > Services then click Add.
Name: C9P DMZ Ports Protocol: UDP(17) Port Range: 1000-65500 Sub-Type: None
Step 2:
Go to Address Objects then click Add.
Name: C9P Primary Zone Assignment: WAN Type: Range Starting IP: This is our SIP Feature Server which we will provide the WAN IP assigned to you. Ending IP: Same as above
Step 3:
Go to Firewall then click Add. Opening up Cloud9Phone VoIP service-ports on the SonicWall
Action: Allow From Zone: LAN To Zone: WAN Service: C9P DMZ Ports Source: Any
Destination: C9P Primary Users Allowed: All Schedule: Always On Enable Enable Logging Enable Allow Fragmented Packets
Action: Allow From Zone: WAN To Zone: LAN Service: C9P DMZ Ports Source: C9P Primary Destination: Any Users Allowed: All Schedule: Always On Enable Enable Logging Enable Allow Fragmented Packets
Action: Allow From Zone: WAN To Zone: LAN Service: C9P DMZ Ports Source: C9P NTP Destination: Any Users Allowed: All Schedule: Always On Enable Enable Logging Enable Allow Fragmented Packets
Step 4:
Go to the VOIP Tab. Uncheck Enable Consistent NAT Uncheck Enable SIP Transformation
NOTE: If LAN to WAN and WAN to LAN are already setup to (Source: ANY, Destination: ANY, there's no need to do the settings)
|
|
Did you find it helpful?
Yes
No
Send feedback Sorry we couldn't be helpful. Help us improve this article with your feedback.